[PATCH 1/2] drm/i915: Add async page flip support for IVB

From: Keith Packard
Date: Thu Jul 25 2013 - 18:15:41 EST


This adds the necesary register defines for async page flipping
through the command ring, and then hooks those up for Ivybridge (gen7)
page flipping.

Signed-off-by: Keith Packard <keithp@xxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 6 ++++++
drivers/gpu/drm/i915/intel_display.c | 37 ++++++++++++++++++++++++++++++++----
2 files changed, 39 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index dc3d6a7..029cfb0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -209,6 +209,7 @@
#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
#define MI_DISPLAY_FLIP MI_INSTR(0x14, 2)
#define MI_DISPLAY_FLIP_I915 MI_INSTR(0x14, 1)
+#define MI_DISPLAY_FLIP_ASYNC_INDICATOR (1 << 22)
#define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
/* IVB has funny definitions for which plane to flip. */
#define MI_DISPLAY_FLIP_IVB_PLANE_A (0 << 19)
@@ -217,6 +218,11 @@
#define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
#define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19)
#define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
+/* These go in the bottom of the base address value */
+#define MI_DISPLAY_FLIP_TYPE_SYNC (0 << 0)
+#define MI_DISPLAY_FLIP_TYPE_ASYNC (1 << 0)
+#define MI_DISPLAY_FLIP_TYPE_STEREO (2 << 0)
+#define MI_DISPLAY_FLIP_TYPE_SYNCHRONOUS (0 << 0)
#define MI_ARB_ON_OFF MI_INSTR(0x08, 0)
#define MI_ARB_ENABLE (1<<0)
#define MI_ARB_DISABLE (0<<0)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bdb8854..166aa2c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1833,8 +1833,10 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev,
alignment = 64 * 1024;
break;
case I915_TILING_X:
- /* pin() will align the object as required by fence */
- alignment = 0;
+ /* Async page flipping requires X tiling and 32kB alignment, so just
+ * make all X tiled frame buffers aligned for that
+ */
+ alignment = 32 * 1024;
break;
case I915_TILING_Y:
/* Despite that we check this in framebuffer_init userspace can
@@ -7514,6 +7516,8 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
uint32_t plane_bit = 0;
+ uint32_t cmd;
+ uint32_t base;
int ret;

ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
@@ -7536,13 +7540,21 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
goto err_unpin;
}

+ cmd = MI_DISPLAY_FLIP_I915 | plane_bit;
+ base = i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset;
+
+ if (flags & DRM_MODE_PAGE_FLIP_ASYNC) {
+ cmd |= MI_DISPLAY_FLIP_ASYNC_INDICATOR;
+ base |= MI_DISPLAY_FLIP_TYPE_ASYNC;
+ }
+
ret = intel_ring_begin(ring, 4);
if (ret)
goto err_unpin;

- intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
+ intel_ring_emit(ring, cmd);
intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
- intel_ring_emit(ring, i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset);
+ intel_ring_emit(ring, base);
intel_ring_emit(ring, (MI_NOOP));

intel_mark_page_flip_active(intel_crtc);
@@ -7591,6 +7603,19 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
fb->pitches[0] != crtc->fb->pitches[0]))
return -EINVAL;

+ /* Check tiling restrictions specific to asynchronous flips
+ */
+ if (page_flip_flags & DRM_MODE_PAGE_FLIP_ASYNC) {
+
+ /* New FB must be X tiled */
+ if (obj->tiling_mode != I915_TILING_X)
+ return -EINVAL;
+
+ /* Current FB must be X tiled */
+ if (to_intel_framebuffer(old_fb)->obj->tiling_mode != I915_TILING_X)
+ return -EINVAL;
+ }
+
work = kzalloc(sizeof *work, GFP_KERNEL);
if (work == NULL)
return -ENOMEM;
@@ -9705,6 +9730,10 @@ void intel_modeset_init(struct drm_device *dev)
dev->mode_config.max_width = 8192;
dev->mode_config.max_height = 8192;
}
+
+ if (IS_GEN7(dev))
+ dev->mode_config.async_page_flip = true;
+
dev->mode_config.fb_base = dev_priv->gtt.mappable_base;

DRM_DEBUG_KMS("%d display pipe%s available.\n",
--
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/