Re: [PATCH v2 3/4] arm: dts: Add USB phy nodes for AM33XX

From: Sergei Shtylyov
Date: Fri Jul 19 2013 - 09:56:03 EST


Hello.

On 19-07-2013 16:34, George Cherian wrote:

Add phy nodes for AM33XX platform and split the musb nodes
per instance.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
Signed-off-by: George Cherian <george.cherian@xxxxxx>
---
arch/arm/boot/dts/am33xx.dtsi | 68 +++++++++++++++++++++++++++++++++----------
1 file changed, 53 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 8e1248f..e3890c4 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -326,21 +326,59 @@
status = "disabled";
};

- usb@47400000 {
- compatible = "ti,musb-am33xx";
- reg = <0x47400000 0x1000 /* usbss */
- 0x47401000 0x800 /* musb instance 0 */
- 0x47401800 0x800>; /* musb instance 1 */
- interrupts = <17 /* usbss */
- 18 /* musb instance 0 */
- 19>; /* musb instance 1 */
- multipoint = <1>;
- num-eps = <16>;
- ram-bits = <12>;
- port0-mode = <3>;
- port1-mode = <3>;
- power = <250>;
- ti,hwmods = "usb_otg_hs";
+ phy1: am335x-usb0@44e10620 {

Shouldn't the PHYs be *under* the usb0/1 device nodes in the hierarchy?
They're not on the same bus as the MUSB controllers for sure.

+ compatible = "ti,am335x-usb2";
+ #phy-cells = <0>;
+ id= <0>;

Forgot space before =.

+ };
+
+ phy2: am335x-usb1@44e10628 {
+ compatible = "ti,am335x-usb2";
+ #phy-cells = <0>;
+ id= <1>;

Same here.

+ };
+
+ omap_control_usb: omap-control-usb@44e10620 {
+ compatible = "ti,omap-control-usb";
+ reg = <0x44e10620 0x10>;
+ reg-names = "control_dev_conf";
+ ti,type = <3>;
+ };
+
+ musb: usb@47400000 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x47400000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupts = <17>;
+ ti,hwmods = "usb_otg_hs";
+
+ usb0@47401000 {

I don't think you need index in the name since you have the address as a part of the name anyway. That way it's closer to the ePAPR spec.

+ reg = <0x47401000 0x800>;
+ interrupts = <18>;
+ interrupt-names = "mc";
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ port-mode = <3>;
+ power = <250>;
+ phys = <&phy1>;

The above lines are indented with spaces, the below one with tabs. Use tabs please.

+ phy-names = "am335x-usb0";
+ };
+
+ usb1@47401800 {
+ reg = <0x47401800 0x800>;
+ interrupts = <19>;
+ interrupt-names = "mc";
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ port-mode = <3>;
+ power = <250>;
+ phys = <&phy2>;

The above lines are indented with spaces, the below one with tabs. Use tabs please.

+ phy-names = "am335x-usb1";
+ };
};

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/