[PATCH] regulator: core: Allow fixed voltage range in multiplelinear ranges

[Axel Lin]

Current code does not allow fixed voltage range in multiple linear ranges.
If someone does set range->uV_step == 0 in one of the linear ranges, we hit
divided by zero bug. This patch fixes this issue.
For fixed voltage range, return any selector means the same voltage.
Thus just return 0.

Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
---
Note: One of the use case is tps65217.

The voltage table for tps65217_vsel_to_uv1:

0  ... 24: uV = vsel * 25000 + 900000;
25 ... 52: uV = (vsel - 24) * 50000 + 1500000;
              = (vsel -25) * 50000 + 1550000;
53 ... 55: uV = (vsel - 52) * 100000 + 2900000;
              = (vsel - 53) * 100000 + 3000000;
56 ... 62: uV = 3300000;

 drivers/regulator/core.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index b6efead..51a8077 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2437,9 +2437,15 @@ int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
 		if (min_uV <= range->min_uV)
 			min_uV = range->min_uV;
 
-		ret = DIV_ROUND_UP(min_uV - range->min_uV, range->uV_step);
-		if (ret < 0)
-			return ret;
+		/* range->uV_step == 0 means fixed voltage range */
+		if (range->uV_step == 0) {
+			ret = 0;
+		} else {
+			ret = DIV_ROUND_UP(min_uV - range->min_uV,
+					   range->uV_step);
+			if (ret < 0)
+				return ret;
+		}
 
 		break;
 	}
-- 
1.8.1.2



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/