Re: Regression 3.11-rc1: omap4panda: no usb and consequently noethernet

From: Arend van Spriel
Date: Thu Jul 18 2013 - 06:18:21 EST


On 07/18/2013 10:59 AM, Tony Lindgren wrote:
* Arend van Spriel <arend@xxxxxxxxxxxx> [130718 01:47]:
So my first step was to follow the recipe given in that commit.
Beside that I noticed a thread about USB issue on LKML so I also
applied the following commit:

commit 352f573e59050c7a604c35c58b4bbfc51edebbee
Author: Roger Quadros <rogerq@xxxxxx>
Date: Tue Jun 18 19:04:47 2013 +0300

ARM: OMAP2+: Provide alias to USB PHY clock

The attached kernel log seems to suggest that the device tree is
picked up by the kernel, but the USB does not seem very active. No
ethernet connectivity. This does seem a regression to me. Is there
some other patch that I need to get it going again?

There are few .dts related patches missing for USB. Roger can
point you to the current versions that Benoit should be queueing
for the -rc series.

Hope Roger or Benoit will chime in.

Then for the SDIO with device tree, take a look at the following
patches:

[PATCH 0/3] WLAN support for omap4 when booted with devicetree
http://comments.gmane.org/gmane.linux.ports.arm.omap/97522#

The wl12xx .dts changes for pandaboard are still missing too.

Then I'll be updating these soonish:
[PATCH 0/4] Updated omap_hsmmc SDIO and remuxing patches

Those are needed for the SDIO interrupt, SDIO will work also
without those.

Thanks for the pointers,

Arend


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/