Re: [PATCH 3/3] ARM: dts: omap4-sdp: add dynamic pin states foruart3/4

From: Tony Lindgren
Date: Thu Jul 18 2013 - 04:10:27 EST


* Grygorii Strashko <grygorii.strashko@xxxxxx> [130717 09:48]:
> Hi,
>
> On 07/17/2013 06:32 PM, Tony Lindgren wrote:
> >* Grygorii Strashko <grygorii.strashko@xxxxxx> [130717 04:49]:
> >>Add dynamic "active"/"idle" pin states for uart3/4 which will be applied
> >>when uart3/4 state is switched from active to idle and back by Runtime
> >>PM or during system suspend.
> >
> >This is good for testing code, but should not be merged because
> >omap4 has the iopad wake-ups available for uarts. So those can
> >be always enabled.
>
> In this case, 2 IRQ will be received per each UART RX event - one from
> PRCM and from UART - and that's not good from PM perspective (It will
> affect on CPUIdle and CPUFreq at least).

Oh I see, that's because I accidentally left the debug code enabled
to make it easier to test the wake-up events without having to
have working off-idle. The wake flags can be kept on always for
sure.

The patch below should sort out the issue of getting wake-up interrupts
during runtime as long as you don't have DEBUG defined.

Regards,

Tony

--- a/drivers/pinctrl/pinctrl-single-omap.c
+++ b/drivers/pinctrl/pinctrl-single-omap.c
@@ -140,9 +140,17 @@ static irqreturn_t pcs_omap_handle_irq(int irq, void *data)
if ((val & OMAP_WAKEUP_EVENT_MASK) == OMAP_WAKEUP_EVENT_MASK)
generic_handle_irq(wakeirq);
}
-
+#ifdef DEBUG
+ /*
+ * This enables wake-up interrupts during runtime also
+ * causing duplicate interrupts. But it also makes debugging
+ * the wake-up events easy as deeper idle states often are
+ * not working for new devices while the drivers are being
+ * developed.
+ */
if (pcso->reconfigure_io_chain)
pcso->reconfigure_io_chain();
+#endif

return IRQ_HANDLED;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/