[PATCH 06/21] MFD: ti_tscadc: ADC Clock check not required

[Zubair Lutfullah]

ADC is ideally expected to work at a frequency of 3MHz.

The present code had a check, which returned error if the frequency

went below the threshold  value. But since AM335x supports various

working frequencies, this check is not required.

Now the code just uses the internal ADC clock divider to set the ADC

frequency w.r.t the sys clock.

Signed-off-by: Patil, Rachna <rachna@xxxxxx>
Signed-off-by: Zubair Lutfullah <zubair.lutfullah@xxxxxxxxx>
---
 drivers/mfd/ti_am335x_tscadc.c       |    6 +-----
 include/linux/mfd/ti_am335x_tscadc.h |    1 -
 2 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index fdbd0d5..e7314e4 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -197,11 +197,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	clock_rate = clk_get_rate(clk);
 	clk_put(clk);
 	clk_value = clock_rate / ADC_CLK;
-	if (clk_value < MAX_CLK_DIV) {
-		dev_err(&pdev->dev, "clock input less than min clock requirement\n");
-		err = -EINVAL;
-		goto err_disable_clk;
-	}
+
 	/* TSCADC_CLKDIV needs to be configured to the value minus 1 */
 	clk_value = clk_value - 1;
 	tscadc_writel(tscadc, REG_CLKDIV, clk_value);
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index f436918..1516dc8 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -127,7 +127,6 @@
 #define SEQ_STATUS BIT(5)
 
 #define ADC_CLK			3000000
-#define	MAX_CLK_DIV		7
 #define TOTAL_STEPS		16
 #define TOTAL_CHANNELS		8
 #define FIFO1_THRESHOLD                        19
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/