Re: [PATCH V2] pci: exynos: split into two parts such as Synopsys partand Exynos part

From: Jingoo Han
Date: Mon Jul 15 2013 - 04:25:43 EST


On Friday, July 12, 2013 7:01 PM, Kishon Vijay Abraham I wrote:
> On Thursday 11 July 2013 11:19 AM, Jingoo Han wrote:
> > Exynos PCIe IP consists of Synopsys specific part and Exynos
> > specific part. Only core block is a Synopsys designware part;
> > other parts are Exynos specific.
> > Also, the Synopsys designware part can be shared with other
> > platforms; thus, it can be split two parts such as Synopsys
> > designware part and Exynos specific part.
> >
> > Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
> > Cc: Pratyush Anand <pratyush.anand@xxxxxx>
> > Cc: Mohit KUMAR <Mohit.KUMAR@xxxxxx>
> > ---
> > Changes since v1:
> > - moved the configuration, I/O, memory space handling to dw_pcie_host_init()
> > - removed exynos_pcie_abort()
> > - replaced 'purple_base' with 'block_base'
> > - replaced 'dbi_base' with 'dbi_addr'
> >
> > drivers/pci/host/Makefile | 1 +
> > drivers/pci/host/pcie-designware.c | 963 +++++++++---------------------------
> > drivers/pci/host/pcie-designware.h | 71 +++
> > drivers/pci/host/pcie-exynos.c | 523 ++++++++++++++++++++
> > 4 files changed, 822 insertions(+), 736 deletions(-)
> > create mode 100644 drivers/pci/host/pcie-designware.h
> > create mode 100644 drivers/pci/host/pcie-exynos.c
> >

[...]

> > -static void exynos_pcie_setup_rc(struct pcie_port *pp)
> > +void dw_pcie_setup_rc(struct pcie_port *pp)
> > {
> > struct pcie_port_info *config = &pp->config;
> > void __iomem *dbi_base = pp->dbi_base;
> > @@ -549,509 +502,47 @@ static void exynos_pcie_setup_rc(struct pcie_port *pp)
> > u32 memlimit;
> >
> > /* set the number of lines as 4 */
> > - readl_rc(pp, dbi_base + PCIE_PORT_LINK_CONTROL, &val);
> > + dw_pcie_readl_rc(pp, dbi_base + PCIE_PORT_LINK_CONTROL, &val);
> > val &= ~PORT_LINK_MODE_MASK;
> > val |= PORT_LINK_MODE_4_LANES;
> > - writel_rc(pp, val, dbi_base + PCIE_PORT_LINK_CONTROL);
> > + dw_pcie_writel_rc(pp, val, dbi_base + PCIE_PORT_LINK_CONTROL);
>
> I guess here we need to make this configurable. In Jacinto6 this can be either
> single lane or double lane. Maybe we should have a dt property to specify the
> number of lanes?

OK, I will make it configurable.

[...]

> > +struct pcie_port_info {
> > + u32 cfg0_size;
> > + u32 cfg1_size;
> > + u32 io_size;
> > + u32 mem_size;
> > + phys_addr_t io_bus_addr;
> > + phys_addr_t mem_bus_addr;
> > +};
> > +
> > +struct pcie_port {
> > + struct device *dev;
> > + u8 controller;
> > + u8 root_bus_nr;
> > + void __iomem *dbi_base;
> > + void __iomem *elbi_base;
> > + void __iomem *phy_base;
> > + void __iomem *block_base;
> > + u64 cfg0_base;
> > + void __iomem *va_cfg0_base;
> > + u64 cfg1_base;
> > + void __iomem *va_cfg1_base;
> > + u64 io_base;
> > + u64 mem_base;
> > + spinlock_t conf_lock;
> > + struct resource cfg;
> > + struct resource io;
> > + struct resource mem;
> > + struct pcie_port_info config;
> > + struct clk *clk;
> > + struct clk *bus_clk;
> > + int irq;
> > + int reset_gpio;
> > + struct dw_pcie_host_ops *ops;
> > +};
>
> I think this structure should be split. This has too many of platform specific
> fields. Maybe we should make pcie_port have only fields necessary for core part
> and have some other structure for platform specific part?
>
> Something like
> struct exynos_pcie {
> [...]
> void __iomem *dbi_base;
> void __iomem *elbi_base;
> void __iomem *phy_base;
> int reset_gpio;
> struct clk *clk;
> struct clk *bus_clk;
> [...]
> struct pcie_port pp;
> }
>
> struct pcie_port {
> struct device *dev;
> u64 cfg0_base;
> void __iomem *va_cfg0_base;
> u64 cfg1_base;
> void __iomem *va_cfg1_base;
> u64 io_base;
> u64 mem_base;
> spinlock_t conf_lock;
> struct resource cfg;
> struct resource io;
> struct resource mem;
> struct pcie_port_info config;
> int irq;
> struct dw_pcie_host_ops *ops;
> };
>
> And in ops, you can use container_of to get reference to exynos_pcie (if we
> want to write to exynos pcie registers)

OK, I see.
It looks good. I will use it as you guided.
Thank you for your suggestion. :)

Best regards,
Jingoo Han


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/