Re: [PATCH -v2 1/3] PCI: introduce PCIe Device Serial NumberCapability support

From: Bjorn Helgaas
Date: Thu Jul 11 2013 - 16:09:40 EST


On Thu, Jul 11, 2013 at 3:51 AM, Don Dutile <ddutile@xxxxxxxxxx> wrote:
> On 07/11/2013 05:43 AM, Yijing Wang wrote:
>>
>> Introduce PCIe Ext Capability Device Serial Number support,
>> so we can use the unique device serial number to identify
>> the physical device. During system suspend, if the PCIe
>> device was removed and inserted a new same device, after
>> system resume there is no good way to identify it, maybe
>> Device Serial Number is a good choice if device support.
>>
>> Signed-off-by: Yijing Wang<wangyijing@xxxxxxxxxx>
>> ---
>> drivers/pci/pci.c | 27 +++++++++++++++++++++++++++
>> drivers/pci/probe.c | 2 ++
>> include/linux/pci.h | 3 +++
>> 3 files changed, 32 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index e37fea6..2e855b5 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -2048,6 +2048,33 @@ void pci_free_cap_save_buffers(struct pci_dev *dev)
>> }
>>
>> /**
>> + * pci_device_serial_number - get device serial number
>> + * @dev: the PCI device
>> + *
>> + * return the device serial number if device support,
>> + * otherwise return 0.
>> + */
>> +u64 pci_device_serial_number(struct pci_dev *dev)
>
> See comment below:
> void pci_device_serial_number(struct pci_dev *dev)
>
>
>> +{
>> + int pos;
>> + u64 sn;
>> + u32 lo, hi;
>> +
>> + if (!pci_is_pcie(dev))
>> + return 0;
>> +
>
> See comment below:
> if (!pci_is_pcie(dev)) {
> dev->sn = 0;
> return;
>
> }
>>
>> + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DSN);
>> + if (!pos)
>> + return 0;
>> +
>> + pci_read_config_dword(dev, pos + 4,&lo);
>> + pci_read_config_dword(dev, pos + 8,&hi);
>> + sn = ((u64)hi<< 32) | lo;
>
> See comment below:
> dev->sn = ((u64)hi<< 32) | lo;
> return;
>
>> + return sn;
>> +}
>> +EXPORT_SYMBOL(pci_device_serial_number);
>> +
>> +/**
>> * pci_configure_ari - enable or disable ARI forwarding
>> * @dev: the PCI device
>> *
>> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
>> index 46ada5c..c4c1a2b 100644
>> --- a/drivers/pci/probe.c
>> +++ b/drivers/pci/probe.c
>> @@ -1322,6 +1322,8 @@ static void pci_init_capabilities(struct pci_dev
>> *dev)
>> /* Power Management */
>> pci_pm_init(dev);
>>
>> + dev->sn = pci_device_serial_number(dev);
>> +
>
> Finally, 'the comment below':
> I know you were following Bjorn's suggestion, which I thought
> was an improvement, but why not do above assignment in
> pci_device_serial_number() ?
> See above....

pci_device_serial_number() would then have the side-effect of saving
the result somewhere, and callers would have to know where to look.
Personally, I think it's simpler to return the serial number directly
and avoid the side-effect, but maybe this is just bike-shedding.

As long as we are bike-shedding, I'd just drop "sn" and do:

return ((u64)hi << 32) | lo;

And of course, you need spaces before "&hi" and "&lo" in the
pci_read_config_dword() calls.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/