Re: [PATCH] net: mv643xx_eth: fix DT port device name
From: Sebastian Hesselbarth
Date: Wed Jul 10 2013 - 18:59:53 EST
On 07/10/2013 12:29 PM, Gerlando Falauto wrote:
Hi Sebastian, Jonas,
first of all thank you for your HUGE efforts in this area.
On 07/08/2013 12:05 AM, Jonas Gorski wrote:
On Sun, 7 Jul 2013 23:43:41 +0200
Jonas Gorski <jogo@xxxxxxxxxxx> wrote:
On Sun, 7 Jul 2013 22:33:51 +0200
Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> wrote:
Device tree support added to Marvell MV643xx ethernet driver registers
port devices from port device nodes found on the corresponding
controller
node. The current port device name will cause the second controller to
fail on registration because of two identical device names. This fixes
the issue by taking the device node's name also as port device name.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Reported-by: Jonas Gorski <jogo@xxxxxxxxxxx>
---
Cc: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
Cc: Jonas Gorski <jogo@xxxxxxxxxxx>
Cc: netdev@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
drivers/net/ethernet/marvell/mv643xx_eth.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c
b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 6495bea..1f3a03d 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -2521,7 +2521,7 @@ static int
mv643xx_eth_shared_of_add_port(struct platform_device *pdev,
of_property_read_u32(pnp, "duplex", &ppd.duplex);
}
- ppdev = platform_device_alloc(MV643XX_ETH_NAME, ppd.port_number);
+ ppdev = platform_device_alloc(pnp->name, ppd.port_number);
if (!ppdev)
return -ENOMEM;
ppdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
This breaks ethernet completely, as there is no platform driver
registered for pnp->name ("ethernetX-port"), only for MV643XX_ETH_NAME.
Looking back at our conversation, this is my fault.
I actually did not change this part as you asked, but I saw the
alloc/del issue with port 0, then added the counter and also only
replaced the ppd.port_number in the alloc with it. I had completely
forgotten at that time to replace the device name; else I would
have caught it back then.
I only caught it now because I tried your patch and wondered why there
wasn't anything registered, not because I saw the problem by review.
The way I understand it, you are "manually" creating platform devices
off the port subnodes (which, incidentally, have a compatible =
"marvell,kirkwood-eth-port" property), but matching with the driver is
indeed performed by device name.
Hence Sebastian's first patch breaks everything and Jonas' latest one
fixes it. Is that correct? Is there any more work ongoing in this area?
One more question: if my understanding above is correct, what's the
reason for NOT having an of_device_id[] table, which looks like was
present in Florian Fainelli's first proposal [1]?
Gerlando,
for the long run, I plan to break with controller/port device
separation. I haven't looked into netdev internals, but I guess
you can have more than one netdev per platform_device.
Using one device per controller will remove some temporal dependencies
of when which driver gets loaded (there will be only one) and also the
root cause of the issue fixed by Jonas.
But it is not on my top priority list, but after fixing MAC address
obliviousness, suspend/resume and initial port setup.
I'm also willing to help testing your present/future kirkwood patches if
you like. Please just put me on Cc:
I once put too many people on Cc and that caused ML rejects, but if I
remember it I will keep you posted.
Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/