Re: 3.8.0-rc4+ - Oops on removing WinTV-HVR-1400 expresscard TV Tuner

[Chris Clayton]

Hello again, Bjorn.

On 04/01/13 18:28, Bjorn Helgaas wrote:

<snip>

> > > Hi Chris,
> > >
> > > The current Linux acpiphp driver doesn't do anything unless it finds
> > > devices with _EJ0 or _RMV methods, and your DSDT has neither.  But I
> > > think that implementation is incorrect because I'm not convinced that
> > > those methods are required in order to do hotplug via ACPI.  For
> > > example, your DSDT *does* have an _L01 method that does notifications
> > > to the root ports.  I suspect that hotplug events on your box generate
> > > an SCI that invokes that method.  Linux basically ignores the
> > > resulting notify events, and I suspect that hotplug works on Windows
> > > because it is paying attention to them.
> > >
> > > Can you build a kernel with CONFIG_ACPI_DEBUG=y, do the following, and
> > > attach all the output to the bugzilla?
> > >
> > > 1) Boot with empty ExpressCard slot (without using "pcie_ports=native")
> > > 2) # echo 0x00010004 > /sys/module/acpi/parameters/debug_layer
> > > 3) # echo 0x08000004 > /sys/module/acpi/parameters/debug_level
> > > 4) # lspci -vv
> > > 5) # setpci -s 1c.3 0x42.w
> > > 6) # setpci -s 1c.3 0x5a.w
> > > 7) # setpci -s 1c.3 0xd8.l
> > > 8) Insert ExpressCard
> > > 9) # setpci -s 1c.3 0x5a.w
> > > 10) # dmesg
> > >
> > > Here's what I think we'll see:
> > >
> > > - Slot Implemented (bit 8 of XCAP at 0x42) set, indicating a slot is
> > > implemented below this root port
> > > - Hot Plug SCI Enable (bit 30 of MPC at 0xd8) set, indicating that the
> > > root port should generate an SCI whenever a hotplug event is detected
> > > - Presence Detect State (bit 6 of SLTSTS at 0x5a) change from 0 with
> > > the slot empty to 1 with the slot occupied
> > > - pciehp doing nothing (since _OSC didn't grant the OS permission to
> > > use PCIe native hotplug)
> > > - dmesg indication of the SCI, leading to a Bus Check notification to
> > > \_SB.PCI0.RP04, which is the 1c.3 root port leading to the ExpressCard
> > > slot
> >
> > As far as I can see, your predicted outcomes where correct. I've added the
> > logs to the bugzilla report.
>
> Yes, it behaved exactly as I expected.  I attached a few more details
> of the analysis to the bug report
> (https://bugzilla.kernel.org/show_bug.cgi?id=54981).  I think we need
> to rework acpiphp to fix this.  We will fix it, but I don't know who
> will do it, or when it will happen.  My list is growing faster than I
> can deal with :(

I see that there has been quite a bit of work in the acpiphp area 
recently. Is any of it intended to fix (or ease the subsequent fixing 
of) this bug report, please?

It's not a big deal if it isn't - I do have a system that, via kernel 
command line arguments, recognises expresscard devices when I plug them 
into the slot. But when the release comes along that includes the 
reworking of acpiphp that you mentioned, I will give extra attention to 
hotplugging when I try out the -rc kernels on my laptop.

Thanks

> Thanks very much for your excellent data collection!

It's my pleasure!

> Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/