Re: [lm-sensors] [PATCH 1/2] ARM: dt: t30 cardhu: add dt entry forlm90

[Guenter Roeck]

On Mon, Jul 08, 2013 at 03:35:48PM +0800, Wei Ni wrote:
> On 07/06/2013 01:38 AM, Stephen Warren wrote:
> > On 07/04/2013 03:09 AM, Wei Ni wrote:
> >> Enable thermal sensor lm90 for t30 cardhu.
> > 
> >> diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
> > 
> >> +		nct1008: nct1008 {
> >> +			compatible = "lm90,nct1008";
> > 
> > "lm90" isn't a valid vendor prefix. I believe the value you want is
> > "onnn,nct1008". Same comment for patch 2/2.
> > 
> The lm90 doesn't support device tree very well. In the DT, we need to
> named as "lm90" so that the lm90 driver can be loaded, and we also need
> to add "nct1008" to indicate this is the nct1008 device, so that the
> lm90 driver can be loaded with the right i2c_device_id->driver_data.
> 
> I set the " compatible = "lm90,nct1008" ", this is the simplest way, and
> we doesn't need to change the lm90.c.
> 
Did you really test "onn,nct1008" or, for that matter, "anything,nct1008" ?

I have been using 
	maxim,max1137
	maxim,max1139
	maxim,max6697
	dallas,ds1621
	linear,ltc3880
	linear,ltc2978
	intersil,zl2006
	ti,tmp421
	ti,tmp431

without problems, and without having to add code to the respective drivers.
I would be quite surprised if "onn,nct1008" would not work.

Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/