Re: [alsa-devel] [PATCH 2/2] ASoC: atmel-pcm: use generic dmaengineframework

[Lars-Peter Clausen]

On 07/03/2013 09:57 AM, Bo Shen wrote:
> Hi Lars,
> 
> On 7/3/2013 15:36, Lars-Peter Clausen wrote:
>>>>> +        slave_config->dst_addr = (dma_addr_t)ssc->phybase + SSC_THR;
>>>> >>[...]
>>>>> >>>+        slave_config->src_addr = (dma_addr_t)ssc->phybase + SSC_RHR;
>>>> >>
>>>> >>Change the type of phybase to dma_addr_t
>>> >
>>> >It should be:
>>> >slave_config->dst_addr = (dma_addr_t)(ssc->phybase + SSC_THR);
>>> >slave_config->src_addr = (dma_addr_t)(ssc->phybase + SSC_RHR);
>> The type of phybase in the ssc_device struct should be changed from
>> resource_size_t to dma_addr_t.
> 
> Actually, the phybase in ssc_device structure is resource_size_t which used to
> access the ssc device register.
> Here, we use ssc register as dma source address or destination address, so we
> convert it to dma_addr_t type. So, not need to change, am I right?

Isn't 'regs' used to access the registers? As far as I can see phybase is only
used in the audio DMA driver.

- Lars
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/