Re: [PATCHv3 2/3] ARM: mxs: cfa10049: Switch bus i2c1 to bitbanging

[Alexandre Belloni]

Hi,

On 02/07/2013 04:45, Fabio Estevam wrote:
> Are you able to use the mxs i2c controller instead of bitbang if you
> use this patch?
> http://www.spinics.net/lists/stable/msg13202.html
> 

Actually, it gets worse. I'm probably doing something wrong but I get:

mxs-i2c 8005a000.i2c: Failed to get PIO reg. write descriptor.

That is the one line 243. I'm open to any suggestion.

BTW, I also tested PIO mode with and without touchscreen support as that
seemed to toggle the issue on your side. It is also worse than what it
was in 3.9. Trying to read the nau7802 ADC never returns.

The excerpt from my DT:

i2c1: i2c@8005a000 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins_a>;
	status = "okay";
};

i2cmux {
	compatible = "i2c-mux-gpio";
	#address-cells = <1>;
	#size-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&i2cmux_pins_cfa10049>;
	mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
	i2c-parent = <&i2c1>;

	i2c@0 {
		reg = <0>;
		#address-cells = <1>;
		#size-cells = <0>;

		adc0: nau7802@2a {
			compatible = "nuvoton,nau7802";
			reg = <0x2a>;
			nuvoton,vldo = <3000>;
		};
	};

[...]


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/