RE: [PATCH 3/4] rtc: omap: add rtc wakeup support to alarm events

[Hebbar, Gururaja]

On Tue, Jul 02, 2013 at 11:39:28, Nori, Sekhar wrote:
> On 7/2/2013 11:34 AM, Hebbar, Gururaja wrote:
> > On Tue, Jul 02, 2013 at 11:32:34, Nori, Sekhar wrote:
> >> On 6/28/2013 3:05 PM, Hebbar Gururaja wrote:
> >>> On some platforms (like AM33xx), a special register (RTC_IRQWAKEEN)
> >>> is available to enable Alarm Wakeup feature. This register needs to be
> >>> properly handled for the rtcwake to work properly.
> >>>
> >>> Platforms using such IP should set "ti,am3352-rtc" in rtc device dt
> >>> compatibility node.
> >>>
> >>> Signed-off-by: Hebbar Gururaja <gururaja.hebbar@xxxxxx>
> >>> Cc: Grant Likely <grant.likely@xxxxxxxxxx>
> >>> Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
> >>> Cc: Rob Landley <rob@xxxxxxxxxxx>
> >>> Cc: Sekhar Nori <nsekhar@xxxxxx>
> >>> Cc: Kevin Hilman <khilman@xxxxxxxxxx>
> >>> Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
> >>> Cc: rtc-linux@xxxxxxxxxxxxxxxx
> >>> Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
> >>> Cc: linux-doc@xxxxxxxxxxxxxxx
> >>> ---
> >>
> >> [...]
> >>
> >>> -#define	OMAP_RTC_DATA_DA830_IDX	1
> >>> +#define	OMAP_RTC_DATA_DA830_IDX		1
> >>> +#define	OMAP_RTC_DATA_AM335X_IDX	2
> >>>  
> >>>  static struct platform_device_id omap_rtc_devtype[] = {
> >>>  	{
> >>> @@ -309,6 +321,9 @@ static struct platform_device_id omap_rtc_devtype[] = {
> >>>  	}, {
> >>>  		.name	= "da830-rtc",
> >>>  		.driver_data = OMAP_RTC_HAS_KICKER,
> >>> +	}, {
> >>> +		.name	= "am335x-rtc",
> >>
> >> may be use am3352-rtc here just to keep the platform device name and of
> >> compatible in sync.
> > 
> > Correct. I will update the same in v2.
> > 
> >>
> >>> +		.driver_data = OMAP_RTC_HAS_KICKER | OMAP_RTC_HAS_IRQWAKEEN,
> >>>  	},
> >>>  	{},
> >>
> >> It is better to use the index defined above in the static initialization
> >> so they remain in sync.
> > 
> > Sorry. I didnât get this.
> > 
> 
> See example below I provided. If its still not clear, let me know what
> is not clear.
> 
> >> 	...
> >> 	[OMAP_RTC_DATA_DA830_IDX] = {
> >> 		.name	= "da830-rtc",
> >> 		.driver_data = OMAP_RTC_HAS_KICKER,
> >> 	},

Thanks for the clarification. In this case will it ok if I update the previous
member also.

> 
> Thanks,
> Sekhar
> 


Regards, 
Gururaja
¢éì®&Þ~º&¶¬–+-±éÝ¥Šw®žË±Êâmébžìdz¹Þ)í…æèw*jg¬±¨¶‰šŽŠÝj/êäz¹ÞŠà2ŠÞ¨è­Ú&¢)ß«a¶Úþø®G«éh®æj:+v‰¨Šwè†Ù>Wš±êÞiÛaxPjØm¶ŸÿÃ-»+ƒùdš_