RE: [PATCH v3] regulator: palmas: model SMPS10 as two regulators

[J, KEERTHY]

Hi Mark,

> -----Original Message-----
> From: ABRAHAM, KISHON VIJAY
> Sent: Monday, July 01, 2013 3:36 PM
> To: Mark Brown
> Cc: lgirdwood@xxxxxxxxx; ldewangan@xxxxxxxxxx; gg@xxxxxxxxxxxxxxx;
> sameo@xxxxxxxxxxxxxxx; J, KEERTHY; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v3] regulator: palmas: model SMPS10 as two
> regulators
> 
> Hi,
> 
> On Monday 01 July 2013 03:31 PM, Mark Brown wrote:
> > On Mon, Jul 01, 2013 at 03:19:42PM +0530, Kishon Vijay Abraham I
> wrote:
> >> SMPS10 has two outputs OUT1 and OUT2 and have one input IN1.
> >> SMPS10-OUT2 is connected to SMPS10-IN1 and can be configured either
> >> in BOOST mode or BYPASS mode. regulator_enable of SMPS10-OUT2
> >> configures it in BOOST mode. For BYPASS mode
> regulator_allow_bypass()
> >> API can be used. SMPS10-OUT1 is connected to SMPS10-OUT2 and can be
> >> enabled using regulator_enable().
> >
> > This doesn't apply...
> 
> Ok. Which tree/branch should it be based on?. I created it on next-
> 20130628 as base.

I had submitted a patch on the same file which was pulled by Samuel.
Kishon is based on a branch which has my patch. I think that is missing in your
Branch. This is the reason why it is not applying.

> 
> Thanks
> Kishon

Regards,
Keerthy
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/