Re: RTL8192CU on ARM not working

From: Richard Genoud
Date: Thu Jun 27 2013 - 08:13:58 EST


2013/6/27 Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>:
> Hi everyone,
>
> I'm currently trying to use a RTL8192CU on an ARM (Freescale imx28,
> armv5) platform, using 3.10-rc3.
>
> Trouble is, while the chip is correctly detected and you can use iw on it
> without any problem it seems, once you start an association to an access
> point, the association goes on, seems to associate, displaying a WARN()
> message [1] and then, after what looks like a random amount of time (could
> be right away, could be after a few minutes), deassociate [2].
>
> During the time where it's associated, we never seem to transmit any
> packets, while iw reports packets being sent, I guess we can assume that
> they are actually never transmitted as well [3].
>
> What seems odd to me as well is that the signal power reported for the access
> point is excessively high when using iw scan (10 dbm), and once connected, the
> signal strength is -64dbm, which makes quite a huge difference.
>
> Do you have any suggestions on how to solve this issue?
>
> Thanks,
> Maxime
>
>
> [1]:
> # iw wlan0 connect FreeWifi 2447
> # [ 485.010858] wlan0: authenticate with f4:ca:e5:c9:f5:91
> [ 485.065514] wlan0: send auth to f4:ca:e5:c9:f5:91 (try 1/3)
> [ 485.075963] wlan0: authenticated
> [ 485.088915] wlan0: associate with f4:ca:e5:c9:f5:91 (try 1/3)
> [ 485.117137] wlan0: RX AssocResp from f4:ca:e5:c9:f5:91 (capab=0x401 status=0 aid=1)
> [ 485.130607] wlan0: associated
> [ 486.917555] ------------[ cut here ]------------
> [ 486.922277] WARNING: at kernel/workqueue.c:1365 __queue_work+0x1f0/0x2f4()
> [ 486.929175] Modules linked in:
> [ 486.932284] CPU: 0 PID: 615 Comm: kworker/0:2 Not tainted 3.10.0-rc3 #2
> [ 486.938958] Workqueue: rtl92c_usb rtl_watchdog_wq_callback
> [ 486.944548] [<c00147dc>] (unwind_backtrace+0x0/0xf0) from [<c00120a0>] (show_stack+0x10/0x14)
> [ 486.953132] [<c00120a0>] (show_stack+0x10/0x14) from [<c001d2ec>] (warn_slowpath_common+0x4c/0x68)
> [ 486.962140] [<c001d2ec>] (warn_slowpath_common+0x4c/0x68) from [<c001d324>] (warn_slowpath_null+0x1c/0x24)
> [ 486.971844] [<c001d324>] (warn_slowpath_null+0x1c/0x24) from [<c003769c>] (__queue_work+0x1f0/0x2f4)
> [ 486.981025] [<c003769c>] (__queue_work+0x1f0/0x2f4) from [<c0037830>] (queue_work_on+0x80/0x88)
> [ 486.989777] [<c0037830>] (queue_work_on+0x80/0x88) from [<c0267ca4>] (rtl_watchdog_wq_callback+0x5dc/0x8bc)
> [ 486.999572] [<c0267ca4>] (rtl_watchdog_wq_callback+0x5dc/0x8bc) from [<c0038cbc>] (process_one_work+0x1c0/0x4c8)
> [ 487.009795] [<c0038cbc>] (process_one_work+0x1c0/0x4c8) from [<c0039684>] (worker_thread+0x140/0x3ac)
> [ 487.019065] [<c0039684>] (worker_thread+0x140/0x3ac) from [<c003f914>] (kthread+0xa4/0xb0)
> [ 487.027381] [<c003f914>] (kthread+0xa4/0xb0) from [<c000f0c0>] (ret_from_fork+0x14/0x34)
> [ 487.035498] ---[ end trace 93341a0c249e647e ]---
>
>
> [2]:
>
> # [ 786.086127] wlan0: deauthenticated from f4:ca:e5:c9:f5:91 (Reason: 2)
> [ 786.126368] cfg80211: Calling CRDA to update world regulatory domain
>
>
> [3]:
> # iw wlan0 station dump
> Station f4:ca:e5:c9:f5:91 (on wlan0)
> inactive time: 55430 ms
> rx bytes: 77826
> rx packets: 1026
> tx packets: 2
> tx retries: 0
> tx failed: 0
> signal: -64 dBm
> signal avg: -63 dBm
> tx bitrate: 1.0 MBit/s
> authorized: yes
> authenticated: yes
> preamble: long
> WMM/WME: yes
> MFP: no
> TDLS peer: no

Hi Maxime,

You should have a look at https://lkml.org/lkml/2013/6/11/300
(in short, use 3.10-rc7)

The warning is still there, but I managed use this device on ARM
(sam9g35) as a client.

Regards,
Richard
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/