[PATCH 2/3] ARM: mxs: dt: Add Crystalfontz CFA-10056 device tree

From: Alexandre Belloni
Date: Wed Jun 26 2013 - 10:52:50 EST

From: Brian Lilly <brian@xxxxxxxxxxxxxxxx>

The CFA-10056 is a breakout board for the CFA-10036, and is
basically a CFA-10037, with ai 4.3" screen.

Signed-off-by: Brian Lilly <brian@xxxxxxxxxxxxxxxx>
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx28-cfa10056.dts | 200 +++++++++++++++++++++++++++++++++++
2 files changed, 201 insertions(+)
create mode 100644 arch/arm/boot/dts/imx28-cfa10056.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 225d939..d494f37 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx28-cfa10037.dtb \
imx28-cfa10049.dtb \
imx28-cfa10055.dtb \
+ imx28-cfa10056.dtb \
imx28-cfa10057.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
new file mode 100644
index 0000000..47b5016
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -0,0 +1,200 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10056 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+ model = "Crystalfontz CFA-10056 Board";
+ compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10036", "fsl,imx28";
+
+ apb@80000000 {
+ apbh@80000000 {
+ pinctrl@80018000 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&hog_pins_cfa10056
+ &hog_pins_cfa10056_pullup>;
+
+ hog_pins_cfa10056: hog-10056@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ hog_pins_cfa10056_pullup: hog-10056-pullup@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
+ 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
+ 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
+ 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi2_pins_cfa10056: spi2-cfa10056@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
+ 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
+ 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi3_pins_cfa10056: spi3-cfa10056@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */
+ 0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */
+ 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
+ 0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */
+ 0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ lcdif_pins_cfa10056: lcdif-evk@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_24bit_pins_a
+ &lcdif_pins_cfa10056>;
+ display = <&display>;
+ status = "okay";
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <32000000>;
+ hactive = <480>;
+ vactive = <800>;
+ hback-porch = <2>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vfront-porch = <2>;
+ hsync-len = <5>;
+ vsync-len = <5>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+ };
+ };
+
+ apbx@80040000 {
+ i2c1: i2c@8005a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ usbphy1: usbphy@8007e000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb1: usb@80090000 {
+ vbus-supply = <&reg_usb1_vbus>;
+ pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb1_vbus: usb1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
+ };
+ };
+
+ ahb@80080000 {
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-reset-gpios = <&gpio2 21 0>;
+ phy-reset-duration = <100>;
+ status = "okay";
+ };
+ };
+
+ spi2 {
+ compatible = "spi-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_cfa10056>;
+ status = "okay";
+ gpio-sck = <&gpio2 16 0>;
+ gpio-mosi = <&gpio2 17 0>;
+ gpio-miso = <&gpio2 18 0>;
+ cs-gpios = <&gpio3 5 0>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hx8369: hx8369@0 {
+ compatible = "himax,hx8369a", "himax,hx8369";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+ gpios-reset = <&gpio3 30 0>;
+ };
+ };
+
+ fiq {
+ compatible = "crystalfontz,cfa10049-fiq";
+ interrupts = <50>;
+ };
+};
--
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/