Re: [PATCH v2] irqchip: add support for MOXA ART SoCs

From: Grant Likely
Date: Mon Jun 24 2013 - 09:18:44 EST


On Thu, 20 Jun 2013 10:58:52 +0200, Jonas Jensen <jonas.jensen@xxxxxxxxx> wrote:
> This patch adds an irqchip driver for the main interrupt controller found
> on MOXA ART SoCs.
>
> v2:
> * use irq_chip_generic
> * remove macro duplicates
>
> Applies to next-20130619
>
> Signed-off-by: Jonas Jensen <jonas.jensen@xxxxxxxxx>
> ---
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-moxart.c | 109 ++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 110 insertions(+), 0 deletions(-)
> create mode 100644 drivers/irqchip/irq-moxart.c
>
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index cda4cb5..956d129 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -16,3 +16,4 @@ obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
> obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
> obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
> obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
> +obj-$(CONFIG_ARCH_MOXART) += irq-moxart.o
> diff --git a/drivers/irqchip/irq-moxart.c b/drivers/irqchip/irq-moxart.c
> new file mode 100644
> index 0000000..25c0ff7
> --- /dev/null
> +++ b/drivers/irqchip/irq-moxart.c
> @@ -0,0 +1,109 @@
> +/*
> + * MOXA ART SoCs IRQ chip driver.
> + *
> + * Copyright (C) 2013 Jonas Jensen
> + *
> + * Jonas Jensen <jonas.jensen@xxxxxxxxx>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/irq.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/irqdomain.h>
> +
> +#include <asm/exception.h>
> +
> +#include "irqchip.h"
> +
> +#define IRQ_SOURCE_REG 0
> +#define IRQ_MASK_REG 0x04
> +#define IRQ_CLEAR_REG 0x08
> +#define IRQ_MODE_REG 0x0c
> +#define IRQ_LEVEL_REG 0x10
> +#define IRQ_STATUS_REG 0x14
> +
> +#define FIQ_SOURCE_REG 0x20
> +#define FIQ_MASK_REG 0x24
> +#define FIQ_CLEAR_REG 0x28
> +#define FIQ_MODE_REG 0x2c
> +#define FIQ_LEVEL_REG 0x30
> +#define FIQ_STATUS_REG 0x34
> +
> +static void __iomem *moxart_irq_base;
> +static struct irq_domain *moxart_irq_domain;
> +static unsigned int interrupt_mask;
> +
> +asmlinkage void __exception_irq_entry moxart_handle_irq(struct pt_regs *regs)
> +{
> + u32 irqstat;
> + int hwirq;
> +
> + irqstat = readl(moxart_irq_base + IRQ_STATUS_REG);
> +
> + while (irqstat) {
> + hwirq = ffs(irqstat) - 1;
> + handle_IRQ(irq_find_mapping(moxart_irq_domain, hwirq), regs);
> + irqstat &= ~(1 << hwirq);
> + }
> +}
> +
> +static __init void moxart_alloc_gc(void __iomem *base,
> + unsigned int irq_start, unsigned int num)
> +{
> + unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
> + int ret;
> + struct irq_chip_generic *gc;
> +
> + ret = irq_alloc_domain_generic_chips(moxart_irq_domain, 32, 1,
> + "MOXARTINTC", handle_edge_irq, clr, 0, IRQ_GC_INIT_MASK_CACHE);
> +
> + if (ret)
> + pr_err("%s: could not alloc generic chip\n", __func__);

If this failure point is hit, the code following it will segfault. Need
to bail at this point.

> +
> + gc = irq_get_domain_generic_chip(moxart_irq_domain, 0);
> +
> + gc->reg_base = base;
> + gc->chip_types[0].regs.mask = IRQ_MASK_REG;
> + gc->chip_types[0].regs.ack = IRQ_CLEAR_REG;
> + gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
> + gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
> + gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
> +}

Why is this split into a separate function? There really isn't any need
to.

> +
> +static int __init moxart_of_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + interrupt_mask = be32_to_cpup(of_get_property(node,
> + "interrupt-mask", NULL));
> + pr_debug("%s: interrupt-mask=%x\n", node->full_name, interrupt_mask);
> +
> + moxart_irq_base = of_iomap(node, 0);
> + if (!moxart_irq_base)
> + panic("%s: unable to map INTC CPU registers\n",
> + node->full_name);

Is in necessary to panic here? Often even if the interrupt controller
setup fails, it is valueable to print an error, exit gracefully and let
the kernel try to continue. There is a greater chance of getting some
form output useful for debug that way.

> +
> + moxart_irq_domain = irq_domain_add_linear(node,
> + 32, &irq_generic_chip_ops, moxart_irq_base);
> +
> + moxart_alloc_gc(moxart_irq_base, 0, 32);
> +
> + writel(0, moxart_irq_base + IRQ_MASK_REG);
> + writel(0xffffffff, moxart_irq_base + IRQ_CLEAR_REG);
> +
> + writel(interrupt_mask, moxart_irq_base + IRQ_MODE_REG);
> + writel(interrupt_mask, moxart_irq_base + IRQ_LEVEL_REG);
> +
> + set_handle_irq(moxart_handle_irq);
> +
> + pr_info("%s: %s finished\n", node->full_name, __func__);
> +
> + return 0;
> +}
> +IRQCHIP_DECLARE(moxa_moxart_ic, "moxa,moxart-interrupt-controller",
> + moxart_of_init);
> --
> 1.7.2.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

--
email sent from notmuch.vim plugin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/