[PATCH RFC v3] media: OF: add video sync endpoint property

From: Prabhakar Lad
Date: Sat Jun 22 2013 - 11:03:33 EST


From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>

This patch adds video sync properties as part of endpoint
properties and also support to parse them in the parser.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Cc: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Cc: Sakari Ailus <sakari.ailus@xxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
Cc: Rob Landley <rob@xxxxxxxxxxx>
Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
Cc: linux-doc@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: davinci-linux-open-source@xxxxxxxxxxxxxxxxxxxx
Cc: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
This patch has 10 warnings for line over 80 characters
for which I think can be ignored.

RFC v2 https://patchwork.kernel.org/patch/2578091/
RFC V1 https://patchwork.kernel.org/patch/2572341/
Changes for v3:
1: Fixed review comments pointed by Laurent and Sylwester.

.../devicetree/bindings/media/video-interfaces.txt | 1 +
drivers/media/v4l2-core/v4l2-of.c | 20 ++++++++++++++++++
include/dt-bindings/media/video-interfaces.h | 17 +++++++++++++++
include/media/v4l2-mediabus.h | 22 +++++++++++---------
4 files changed, 50 insertions(+), 10 deletions(-)
create mode 100644 include/dt-bindings/media/video-interfaces.h

diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index e022d2d..2081278 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -101,6 +101,7 @@ Optional endpoint properties
array contains only one entry.
- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
clock mode.
+- video-sync: property indicating to sync the video on a signal in RGB.


Example
diff --git a/drivers/media/v4l2-core/v4l2-of.c b/drivers/media/v4l2-core/v4l2-of.c
index aa59639..1a54530 100644
--- a/drivers/media/v4l2-core/v4l2-of.c
+++ b/drivers/media/v4l2-core/v4l2-of.c
@@ -100,6 +100,26 @@ static void v4l2_of_parse_parallel_bus(const struct device_node *node,
if (!of_property_read_u32(node, "data-shift", &v))
bus->data_shift = v;

+ if (!of_property_read_u32(node, "video-sync", &v)) {
+ switch (v) {
+ case V4L2_MBUS_VIDEO_SEPARATE_SYNC:
+ flags |= V4L2_MBUS_VIDEO_SEPARATE_SYNC;
+ break;
+ case V4L2_MBUS_VIDEO_COMPOSITE_SYNC:
+ flags |= V4L2_MBUS_VIDEO_COMPOSITE_SYNC;
+ break;
+ case V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE:
+ flags |= V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE;
+ break;
+ case V4L2_MBUS_VIDEO_SYNC_ON_GREEN:
+ flags |= V4L2_MBUS_VIDEO_SYNC_ON_GREEN;
+ break;
+ case V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE:
+ flags |= V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE;
+ break;
+ }
+ }
+
bus->flags = flags;

}
diff --git a/include/dt-bindings/media/video-interfaces.h b/include/dt-bindings/media/video-interfaces.h
new file mode 100644
index 0000000..1a083dd
--- /dev/null
+++ b/include/dt-bindings/media/video-interfaces.h
@@ -0,0 +1,17 @@
+/*
+ * This header provides constants for video interface.
+ *
+ */
+
+#ifndef _DT_BINDINGS_VIDEO_INTERFACES_H
+#define _DT_BINDINGS_VIDEO_INTERFACES_H
+
+#define V4L2_MBUS_VIDEO_SEPARATE_SYNC (1 << 2)
+#define V4L2_MBUS_VIDEO_COMPOSITE_SYNC (1 << 3)
+#define V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE (1 << 4)
+#define V4L2_MBUS_VIDEO_SYNC_ON_GREEN (1 << 5)
+#define V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE (1 << 6)
+
+#define V4L2_MBUS_VIDEO_INTERFACES_END 6
+
+#endif
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 83ae07e..a4676dd 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -11,6 +11,8 @@
#ifndef V4L2_MEDIABUS_H
#define V4L2_MEDIABUS_H

+#include <dt-bindings/media/video-interfaces.h>
+
#include <linux/v4l2-mediabus.h>

/* Parallel flags */
@@ -28,18 +30,18 @@
* V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
* configuration of hardware that uses [HV]REF signals
*/
-#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << 2)
-#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << 3)
-#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << 4)
-#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << 5)
-#define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << 6)
-#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << 7)
-#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << 8)
-#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << 9)
+#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 1))
+#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 2))
+#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 3))
+#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 4))
+#define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 5))
+#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 6))
+#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 7))
+#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 8))
/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
-#define V4L2_MBUS_FIELD_EVEN_HIGH (1 << 10)
+#define V4L2_MBUS_FIELD_EVEN_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 9))
/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
-#define V4L2_MBUS_FIELD_EVEN_LOW (1 << 11)
+#define V4L2_MBUS_FIELD_EVEN_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 10))

/* Serial flags */
/* How many lanes the client can use */
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/