[PATCH 3/8] mmc: atmel-mci: prepare clk before calling enable

From: Boris BREZILLON
Date: Wed Jun 19 2013 - 07:33:56 EST


Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to
avoid common clk framework warnings.

Signed-off-by: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
---
drivers/mmc/host/atmel-mci.c | 29 ++++++++++++++++++++---------
1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index e75774f..e3058a5 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -380,6 +380,8 @@ static int atmci_regs_show(struct seq_file *s, void *v)
{
struct atmel_mci *host = s->private;
u32 *buf;
+ int ret = 0;
+

buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL);
if (!buf)
@@ -391,9 +393,13 @@ static int atmci_regs_show(struct seq_file *s, void *v)
* consistent.
*/
spin_lock_bh(&host->lock);
- clk_enable(host->mck);
+ ret = clk_prepare_enable(host->mck);
+ if (ret) {
+ spin_unlock_bh(&host->lock);
+ goto out;
+ }
memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
- clk_disable(host->mck);
+ clk_disable_unprepare(host->mck);
spin_unlock_bh(&host->lock);

seq_printf(s, "MR:\t0x%08x%s%s ",
@@ -444,9 +450,10 @@ static int atmci_regs_show(struct seq_file *s, void *v)
val & ATMCI_CFG_LSYNC ? " LSYNC" : "");
}

+out:
kfree(buf);

- return 0;
+ return ret;
}

static int atmci_regs_open(struct inode *inode, struct file *file)
@@ -1281,7 +1288,7 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)

spin_lock_bh(&host->lock);
if (!host->mode_reg) {
- clk_enable(host->mck);
+ clk_prepare_enable(host->mck);
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
if (host->caps.has_cfg_reg)
@@ -1361,7 +1368,7 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
if (host->mode_reg) {
atmci_readl(host, ATMCI_MR);
- clk_disable(host->mck);
+ clk_disable_unprepare(host->mck);
}
host->mode_reg = 0;
}
@@ -2379,10 +2386,12 @@ static int __init atmci_probe(struct platform_device *pdev)
if (!host->regs)
goto err_ioremap;

- clk_enable(host->mck);
+ ret = clk_prepare_enable(host->mck);
+ if (ret)
+ goto err_clk_prepare_enable;
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
host->bus_hz = clk_get_rate(host->mck);
- clk_disable(host->mck);
+ clk_disable_unprepare(host->mck);

host->mapbase = regs->start;

@@ -2463,6 +2472,8 @@ err_init_slot:
dma_release_channel(host->dma.chan);
free_irq(irq, host);
err_request_irq:
+ clk_unprepare(host->mck);
+err_clk_prepare_enable:
iounmap(host->regs);
err_ioremap:
clk_put(host->mck);
@@ -2487,11 +2498,11 @@ static int __exit atmci_remove(struct platform_device *pdev)
atmci_cleanup_slot(host->slot[i], i);
}

- clk_enable(host->mck);
+ clk_prepare_enable(host->mck);
atmci_writel(host, ATMCI_IDR, ~0UL);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
atmci_readl(host, ATMCI_SR);
- clk_disable(host->mck);
+ clk_disable_unprepare(host->mck);

if (host->dma.chan)
dma_release_channel(host->dma.chan);
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/