[PATCH 3/3] ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()

[Lee Jones]

mop500_snowball_ethernet_clock_enable() provided a means to enable a
clock which was used for the SMSC911x Ethernet device on Snowball. It
was merely a stand-in until the driver was common clk compliant. Now
that it is, this can be removed for both DT and ATAGs booting.

Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
 arch/arm/mach-ux500/board-mop500.c | 11 -----------
 arch/arm/mach-ux500/board-mop500.h |  1 -
 arch/arm/mach-ux500/cpu-db8500.c   |  1 -
 3 files changed, 13 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 238b237..f7a1feb 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -419,15 +419,6 @@ static void mop500_prox_deactivate(struct device *dev)
 }
 #endif
 
-void mop500_snowball_ethernet_clock_enable(void)
-{
-	struct clk *clk;
-
-	clk = clk_get_sys("fsmc", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-}
-
 #ifdef CONFIG_ATAGS
 static struct cryp_platform_data u8500_cryp1_platform_data = {
 		.mem_to_engine = {
@@ -644,8 +635,6 @@ static void __init snowball_init_machine(void)
 	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
-	mop500_snowball_ethernet_clock_enable();
-
 	u8500_cryp1_hash1_init(parent);
 
 	/* This board has full regulator constraints */
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 6f0bfcb..d6fab16 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -105,7 +105,6 @@ void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
 void mop500_audio_init(struct device *parent);
-void mop500_snowball_ethernet_clock_enable(void);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 084f104..1472dde 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -300,7 +300,6 @@ static void __init u8500_init_machine(void)
 		mop500_pinmaps_init();
 	else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
 		snowball_pinmaps_init();
-		mop500_snowball_ethernet_clock_enable();
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
 		hrefv60_pinmaps_init();
 	else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/