[PATCH] regulator: palmas: Fix "enable_reg" to point to the correct reg for SMPS10

[Kishon Vijay Abraham I]

regulator_enable_regmap() uses enable_reg to enable the regulator.
But enable_reg for smps10 points to SMPS10_STATUS which is a
read-only register. Fixed the same by having enable_reg
set to SMPS10_CTRL.

Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 drivers/regulator/palmas-regulator.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 92ceed0..87d4f13 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -878,7 +878,7 @@ static int palmas_regulators_probe(struct platform_device *pdev)
 			pmic->desc[id].vsel_mask = SMPS10_VSEL;
 			pmic->desc[id].enable_reg =
 					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
-							PALMAS_SMPS10_STATUS);
+							PALMAS_SMPS10_CTRL);
 			pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
 			pmic->desc[id].min_uV = 3750000;
 			pmic->desc[id].uV_step = 1250000;
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/