[PATCH 0/1] i2c: omap: correct usage of the interrupt enable register

[Oleksandr Dmytryshyn]

Interrupts from i2c controller are enabled while i2c bus is in the
suspend mode (I2C_IE register doesn't equals to 0).

Starting from the OMAP chips with version2 registers scheme there
are 2 registers (I2C_IRQENABLE_SET and I2C_IRQENABLE_CLR) to manage
interrupts instead of the older OMAP chips old scheme which have
only one register (I2C_IE). Now for enabling interrupts we must
use I2C_IRQENABLE_SET register and for disabling interrupts we must
use I2C_IRQENABLE_CLR register.

Next patch fixes it.

Patch is based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
tag: v3.10-rc2

Verified on OMAP4430.

Oleksandr Dmytryshyn (1):
  i2c: omap: correct usage of the interrupt enable register

 drivers/i2c/busses/i2c-omap.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

-- 
1.8.2.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/