[PATCH] ARM: OMAP4: USB_EHCI_HCD needs USB_PHY and NOP_USB_XCEIV

[Adrien VergÃ]

On OMAP4 platforms, EHCI HCD needs the physical layer signalling
activated, along with the NOP USB Transceiver driver. Otherwise, the
kernel boots without registering any USB device.

This patch applies to Linux 3.10-rc2.

Signed-off-by: Adrien Vergà <adrienverge@xxxxxxxxx>
---
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index de94f26..47959d7 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -44,6 +44,8 @@ endif # USB_XHCI_HCD
 config USB_EHCI_HCD
 	tristate "EHCI HCD (USB 2.0) support"
 	depends on USB_ARCH_HAS_EHCI
+	select USB_PHY if ARCH_OMAP4
+	select NOP_USB_XCEIV if ARCH_OMAP4
 	---help---
 	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
 	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/