Re: [PATCH 2/2] pinctrl: exynos: fix eint wakeup by using irq_set_wake()

[Tomasz Figa]

On Thursday 16 of May 2013 10:12:32 Doug Anderson wrote:
> From: Prathyush K <prathyush.k@xxxxxxxxxxx>
> 
> Add the irq_set_wake function for exynos pinctrl to configure the
> external interrupt wakeup mask register.
> 
> [dianders: minor nit fixes; port to ToT]
> 
> Signed-off-by: Prathyush K <prathyush.k@xxxxxxxxxxx>
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> ---
>  drivers/pinctrl/pinctrl-exynos.c  | 45
> ++++++++++++++++++++++++++++-----------
> drivers/pinctrl/pinctrl-exynos.h  |  3 ++-
>  drivers/pinctrl/pinctrl-samsung.h |  2 ++
>  3 files changed, 37 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/pinctrl/pinctrl-exynos.c
> b/drivers/pinctrl/pinctrl-exynos.c index ac74281..3ebb2ff 100644
> --- a/drivers/pinctrl/pinctrl-exynos.c
> +++ b/drivers/pinctrl/pinctrl-exynos.c
> @@ -30,6 +30,8 @@
>  #include <linux/spinlock.h>
>  #include <linux/err.h>
> 
> +#include <plat/pm.h>
> +

This is not going to work with CONFIG_MULTIPLATFORM.

Now this raises a question what is the preferred way to pass some data 
from generic driver to platform code.

I would suggest adding a function called exynos_pinctrl_get_eintmask() (or 
whatever) that would return the wake-up mask configured in the driver and 
then modify platform code to use it.

>  #include "pinctrl-samsung.h"
>  #include "pinctrl-exynos.h"
> 
> @@ -326,6 +328,24 @@ static int exynos_wkup_irq_set_type(struct irq_data
> *irqd, unsigned int type) return 0;
>  }
> 
> +static int exynos_wkup_irq_set_wake(struct irq_data *irqd, unsigned int
> state) +{
> +	struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
> +	const int eint_num = bank->eint_base + irqd->hwirq;
> +	unsigned long bit = 1L << eint_num;
> +
> +	pr_info("wake %s for eint %d / %s[%ld]\n",
> +		state ? "enabled" : "disabled",
> +		eint_num, bank->name, irqd->hwirq);
> +
> +	if (!state)
> +		s3c_irqwake_eintmask |= bit;
> +	else
> +		s3c_irqwake_eintmask &= ~bit;
> +
> +	return 0;
> +}
> +
>  /*
>   * irq_chip for wakeup interrupts
>   */
> @@ -335,6 +355,7 @@ static struct irq_chip exynos_wkup_irq_chip = {
>  	.irq_mask	= exynos_wkup_irq_mask,
>  	.irq_ack	= exynos_wkup_irq_ack,
>  	.irq_set_type	= exynos_wkup_irq_set_type,
> +	.irq_set_wake	= exynos_wkup_irq_set_wake,
>  };
> 
>  /* interrupt handler for wakeup interrupts 0..15 */
> @@ -543,10 +564,10 @@ static struct samsung_pin_bank
> exynos4210_pin_banks1[] = { EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
>  	EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
>  	EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
> -	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
> -	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
> -	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
> -	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00, 0),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04, 8),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08, 16),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c, 24),
>  };
> 
>  /* pin banks of exynos4210 pin-controller 2 */
> @@ -629,10 +650,10 @@ static struct samsung_pin_bank
> exynos4x12_pin_banks1[] = { EXYNOS_PIN_BANK_EINTN(8, 0x1A0, "gpy4"),
>  	EXYNOS_PIN_BANK_EINTN(8, 0x1C0, "gpy5"),
>  	EXYNOS_PIN_BANK_EINTN(8, 0x1E0, "gpy6"),
> -	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
> -	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
> -	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
> -	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00, 0),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04, 8),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08, 16),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c, 24),
>  };
> 
>  /* pin banks of exynos4x12 pin-controller 2 */
> @@ -724,10 +745,10 @@ static struct samsung_pin_bank
> exynos5250_pin_banks0[] = { EXYNOS_PIN_BANK_EINTN(8, 0x220, "gpy4"),
>  	EXYNOS_PIN_BANK_EINTN(8, 0x240, "gpy5"),
>  	EXYNOS_PIN_BANK_EINTN(8, 0x260, "gpy6"),
> -	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
> -	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
> -	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
> -	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00, 0),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04, 8),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08, 16),
> +	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c, 24),
>  };
> 
>  /* pin banks of exynos5250 pin-controller 1 */
> diff --git a/drivers/pinctrl/pinctrl-exynos.h
> b/drivers/pinctrl/pinctrl-exynos.h index 9b1f77a..d98e9ff 100644
> --- a/drivers/pinctrl/pinctrl-exynos.h
> +++ b/drivers/pinctrl/pinctrl-exynos.h
> @@ -65,13 +65,14 @@
>  		.name		= id			\
>  	}
> 
> -#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs)	\
> +#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs, base)\
>  	{						\
>  		.type		= &bank_type_alive,	\
>  		.pctl_offset	= reg,			\
>  		.nr_pins	= pins,			\
>  		.eint_type	= EINT_TYPE_WKUP,	\
>  		.eint_offset	= offs,			\
> +		.eint_base	= base,			\

I can't look at my patch at the moment, but I think I have managed to get 
EINT index without adding this extra field.

Best regards,
Tomasz

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/