[PATCH 10/10] usb: phy: ab8500-usb: add ab9540 support
From: Fabio Baltieri
Date: Wed May 15 2013 - 08:05:48 EST
Add support for the ab9540 variant of the ab8500 family.
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Acked-by: Maxime Coquelin <maxime.coquelin@xxxxxx>
Cc: Avinash Kumar <avinash.kumar@xxxxxxxxxxxxxx>
Cc: Thirupathi Chippakurthy <thirupathi.chippakurthy@xxxxxxxxxxxxxx>
Signed-off-by: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
---
drivers/usb/phy/phy-ab8500-usb.c | 213 +++++++++++++++++++++++++++++++++++++++
1 file changed, 213 insertions(+)
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 869ca26..7fd19bb 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -6,6 +6,7 @@
* Copyright (C) 2010-2013 ST-Ericsson AB
* Mian Yousaf Kaukab <mian.yousaf.kaukab@xxxxxxxxxxxxxx>
* Avinash Kumar <avinash.kumar@xxxxxxxxxxxxxx>
+ * Thirupathi Chippakurthy <thirupathi.chippakurthy@xxxxxxxxxxxxxx>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -45,6 +46,7 @@
#define AB8500_USB_LINE_STAT_REG 0x80
#define AB8505_USB_LINE_STAT_REG 0x94
#define AB8540_USB_LINK_STAT_REG 0x94
+#define AB9540_USB_LINK_STAT_REG 0x94
#define AB8540_USB_OTG_CTL_REG 0x87
#define AB8500_USB_PHY_CTRL_REG 0x8A
#define AB8540_VBUS_CTRL_REG 0x82
@@ -158,6 +160,37 @@ enum ab8540_usb_link_status {
USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_8540
};
+enum ab9540_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_9540 = 0,
+ USB_LINK_STD_HOST_NC_9540,
+ USB_LINK_STD_HOST_C_NS_9540,
+ USB_LINK_STD_HOST_C_S_9540,
+ USB_LINK_CDP_9540,
+ USB_LINK_RESERVED0_9540,
+ USB_LINK_RESERVED1_9540,
+ USB_LINK_DEDICATED_CHG_9540,
+ USB_LINK_ACA_RID_A_9540,
+ USB_LINK_ACA_RID_B_9540,
+ USB_LINK_ACA_RID_C_NM_9540,
+ USB_LINK_RESERVED2_9540,
+ USB_LINK_RESERVED3_9540,
+ USB_LINK_HM_IDGND_9540,
+ USB_LINK_CHARGERPORT_NOT_OK_9540,
+ USB_LINK_CHARGER_DM_HIGH_9540,
+ USB_LINK_PHYEN_NO_VBUS_NO_IDGND_9540,
+ USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_9540,
+ USB_LINK_STD_UPSTREAM_9540,
+ USB_LINK_CHARGER_SE1_9540,
+ USB_LINK_CARKIT_CHGR_1_9540,
+ USB_LINK_CARKIT_CHGR_2_9540,
+ USB_LINK_ACA_DOCK_CHGR_9540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_9540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_9540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_EN_9540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_9540,
+ USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_9540
+};
+
enum ab8500_usb_mode {
USB_IDLE = 0,
USB_PERIPHERAL,
@@ -378,6 +411,132 @@ static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
#define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_enable(ab, false)
#define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_disable(ab, false)
+static int ab9540_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab9540_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab9540_usb_link_status_update %d\n", lsts);
+
+ if (ab->previous_link_status_state == USB_LINK_HM_IDGND_9540 &&
+ (lsts == USB_LINK_STD_HOST_C_NS_9540 ||
+ lsts == USB_LINK_STD_HOST_NC_9540))
+ return 0;
+
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_9540 &&
+ (lsts == USB_LINK_STD_HOST_NC_9540))
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_9540:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_9540:
+ case USB_LINK_RESERVED0_9540:
+ case USB_LINK_RESERVED1_9540:
+ case USB_LINK_RESERVED2_9540:
+ case USB_LINK_RESERVED3_9540:
+ if (ab->mode == USB_PERIPHERAL)
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN, &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /* Fallback to default B_IDLE as nothing is connected. */
+ ab->phy.state = OTG_STATE_B_IDLE;
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_9540:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_9540:
+ case USB_LINK_STD_HOST_C_NS_9540:
+ case USB_LINK_STD_HOST_C_S_9540:
+ case USB_LINK_CDP_9540:
+ if (ab->mode == USB_HOST) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_host_phy_dis(ab);
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_9540:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_9540:
+ case USB_LINK_STD_UPSTREAM_9540:
+ if (ab->mode == USB_PERIPHERAL) {
+ ab->mode = USB_HOST;
+ ab8500_usb_peri_phy_dis(ab);
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_9540:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_PHYEN_NO_VBUS_NO_IDGND_9540:
+ case USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_9540:
+ if (!(is_ab9540_2p0_or_earlier(ab->ab8500))) {
+ event = UX500_MUSB_NONE;
+ if (ab->mode == USB_HOST) {
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_host_phy_dis(ab);
+ ab->mode = USB_IDLE;
+ }
+ if (ab->mode == USB_PERIPHERAL) {
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_peri_phy_dis(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN,
+ &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
static int ab8540_usb_link_status_update(struct ab8500_usb *ab,
enum ab8540_usb_link_status lsts)
{
@@ -707,6 +866,13 @@ static int abx500_usb_link_status_update(struct ab8500_usb *ab)
AB8500_USB, AB8540_USB_LINK_STAT_REG, ®);
lsts = (reg >> 3) & 0xFF;
ret = ab8540_usb_link_status_update(ab, lsts);
+ } else if (is_ab9540(ab->ab8500)) {
+ enum ab9540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB9540_USB_LINK_STAT_REG, ®);
+ lsts = (reg >> 3) & 0xFF;
+ ret = ab9540_usb_link_status_update(ab, lsts);
}
return ret;
@@ -1146,6 +1312,43 @@ static void ab8500_usb_set_ab8540_tuning_values(struct ab8500_usb *ab)
err);
}
+static void ab8500_usb_set_ab9540_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x80);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
static int ab8500_usb_probe(struct platform_device *pdev)
{
struct ab8500_usb *ab;
@@ -1198,6 +1401,12 @@ static int ab8500_usb_probe(struct platform_device *pdev)
AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS |
AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK |
AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab9540(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ if (is_ab9540_2p0_or_earlier(ab->ab8500))
+ ab->flags |= AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ;
}
/* Disable regulator voltage setting for AB8500 <= v2.0 */
@@ -1242,6 +1451,9 @@ static int ab8500_usb_probe(struct platform_device *pdev)
else if (is_ab8540(ab->ab8500))
/* Phy tuning values for AB8540 */
ab8500_usb_set_ab8540_tuning_values(ab);
+ else if (is_ab9540(ab->ab8500))
+ /* Phy tuning values for AB9540 */
+ ab8500_usb_set_ab9540_tuning_values(ab);
/* Needed to enable ID detection. */
ab8500_usb_wd_workaround(ab);
@@ -1286,6 +1498,7 @@ static int ab8500_usb_remove(struct platform_device *pdev)
static struct platform_device_id ab8500_usb_devtype[] = {
{ .name = "ab8500-usb", },
{ .name = "ab8540-usb", },
+ { .name = "ab9540-usb", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, ab8500_usb_devtype);
--
1.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/