[PATCH v3] ARM:dts:omap4-panda:Update the LED support for the panda DTS

From: Dan Murphy
Date: Tue May 14 2013 - 10:18:28 EST


The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es
are different.

A1-A3 = gpio_wk7
ES = gpio_110

There is no change to LED D2

Abstract away the pinmux and the LED definitions for the two boards into
the respective DTS files.

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
arch/arm/boot/dts/omap4-panda-common.dtsi | 16 +++++++++++-
arch/arm/boot/dts/omap4-panda-es.dts | 40 +++++++++++++++++++++++++++++
2 files changed, 55 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 03bd60d..2b516af 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -16,7 +16,7 @@
reg = <0x80000000 0x40000000>; /* 1 GB */
};

- leds {
+ leds: leds {
compatible = "gpio-leds";
heartbeat {
label = "pandaboard::status1";
@@ -137,6 +137,20 @@
};
};

+&omap4_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &led_wkgpio_pins
+ >;
+
+ led_wkgpio_pins: pinmux_leds_wkpins {
+ pinctrl-single,pins = <
+ 0x1a 0x3 /* gpio_wk7 OUTPUT | MODE 3 */
+ 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */
+ >;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index f1d8c21..8d1ba03 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -34,3 +34,43 @@
0x5e 0x100 /* hdmi_sda.hdmi_sda INPUT | MODE 0 */
>;
};
+
+&leds {
+ compatible = "gpio-leds";
+ heartbeat {
+ label = "pandaboard::status1";
+ gpios = <&gpio4 14 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ mmc {
+ label = "pandaboard::status2";
+ gpios = <&gpio1 8 0>;
+ linux,default-trigger = "gpio";
+ };
+};
+
+&omap4_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &led_gpio_pins
+ >;
+
+ led_gpio_pins: gpio_led_pmx {
+ pinctrl-single,pins = <
+ 0xb6 0x3 /* gpio_110 OUTPUT | MODE 3 */
+ >;
+ };
+};
+
+&omap4_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &led_wkgpio_pins
+ >;
+
+ led_wkgpio_pins: pinmux_leds_wkpins {
+ pinctrl-single,pins = <
+ 0x1c 0x3 /* gpio_wk8 OUTPUT | MODE 3 */
+ >;
+ };
+};
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/