[PATCH v2] net/macb: fix ISR clear-on-write behavior only for some SoC

[Nicolas Ferre]

Commit 749a2b6 (net/macb: clear tx/rx completion flags in ISR)
introduces clear-on-write on ISR register. This behavior is not always
implemented when using Cadence MACB/GEM and is breaking other platforms.
We are using the Design Configuration Register 1 information and a capability
property to actually activate this clear-on-write behavior on ISR.

Reported-by: Hein Tibosch <hein_tibosch@xxxxxxxx>
Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
---
v2: - use DCFG1 bit 23 integration information instead of device tree
      compatibility string to retreive information about c-o-r vs. c-o-w ISR.
    - move configuration in macb_init_hw() function instead of probe() - at
      "open" time.

As I have changed the most of this patch, I will collect your Ack and feedback
just like a new patch. Thanks for your help...

Bye,

 drivers/net/ethernet/cadence/macb.c | 18 ++++++++++++++++--
 drivers/net/ethernet/cadence/macb.h |  7 +++++++
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 6be513d..c89aa41 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -485,7 +485,8 @@ static void macb_tx_interrupt(struct macb *bp)
 	status = macb_readl(bp, TSR);
 	macb_writel(bp, TSR, status);
 
-	macb_writel(bp, ISR, MACB_BIT(TCOMP));
+	if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
+		macb_writel(bp, ISR, MACB_BIT(TCOMP));
 
 	netdev_vdbg(bp->dev, "macb_tx_interrupt status = 0x%03lx\n",
 		(unsigned long)status);
@@ -738,7 +739,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 			 * now.
 			 */
 			macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
-			macb_writel(bp, ISR, MACB_BIT(RCOMP));
+			if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
+				macb_writel(bp, ISR, MACB_BIT(RCOMP));
 
 			if (napi_schedule_prep(&bp->napi)) {
 				netdev_vdbg(bp->dev, "scheduling RX softirq\n");
@@ -1062,6 +1064,17 @@ static void macb_configure_dma(struct macb *bp)
 	}
 }
 
+/*
+ * Configure peripheral capacities according to integration options used
+ */
+static void macb_configure_caps(struct macb *bp)
+{
+	if (macb_is_gem(bp)) {
+		if (GEM_BF(IRQCOR, gem_readl(bp, DCFG1)) == 0)
+			bp->caps |= MACB_CAPS_ISR_CLEAR_ON_WRITE;
+	}
+}
+
 static void macb_init_hw(struct macb *bp)
 {
 	u32 config;
@@ -1084,6 +1097,7 @@ static void macb_init_hw(struct macb *bp)
 	bp->duplex = DUPLEX_HALF;
 
 	macb_configure_dma(bp);
+	macb_configure_caps(bp);
 
 	/* Initialize TX and RX buffers */
 	macb_writel(bp, RBQP, bp->rx_ring_dma);
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 993d703..548c0ec 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -300,6 +300,8 @@
 #define MACB_REV_SIZE				16
 
 /* Bitfields in DCFG1. */
+#define GEM_IRQCOR_OFFSET			23
+#define GEM_IRQCOR_SIZE				1
 #define GEM_DBWDEF_OFFSET			25
 #define GEM_DBWDEF_SIZE				3
 
@@ -323,6 +325,9 @@
 #define MACB_MAN_READ				2
 #define MACB_MAN_CODE				2
 
+/* Capability mask bits */
+#define MACB_CAPS_ISR_CLEAR_ON_WRITE		0x1
+
 /* Bit manipulation macros */
 #define MACB_BIT(name)					\
 	(1 << MACB_##name##_OFFSET)
@@ -574,6 +579,8 @@ struct macb {
 	unsigned int 		speed;
 	unsigned int 		duplex;
 
+	u32			caps;
+
 	phy_interface_t		phy_interface;
 
 	/* AT91RM9200 transmit */
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/