Re: [PATCH V4 3/3] pwm: pxa: add device tree support

From: Eric Miao
Date: Sun May 12 2013 - 22:27:28 EST


On Mon, May 6, 2013 at 9:30 AM, Chao Xie <chao.xie@xxxxxxxxxxx> wrote:
> Add the deice tree support for pwm-pxa.
>
> Signed-off-by: Chao Xie <chao.xie@xxxxxxxxxxx>
> ---
> drivers/pwm/pwm-pxa.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++-
> 1 files changed, 51 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
> index aa4bea7..c8d59a2 100644
> --- a/drivers/pwm/pwm-pxa.c
> +++ b/drivers/pwm/pwm-pxa.c
> @@ -9,6 +9,8 @@
> *
> * 2008-02-13 initial version
> * eric miao <eric.miao@xxxxxxxxxxx>
> + * 2013-04-24 add device tree support
> + * Chao Xie <chao.xie@xxxxxxxxxxx>
> */
>
> #include <linux/module.h>
> @@ -18,6 +20,8 @@
> #include <linux/err.h>
> #include <linux/clk.h>
> #include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> #include <linux/pwm.h>
>
> #include <asm/div64.h>
> @@ -124,6 +128,38 @@ static struct pwm_ops pxa_pwm_ops = {
> .owner = THIS_MODULE,
> };
>
> +static const struct of_device_id pxa_pwm_of_match[] = {
> + {
> + .compatible = "marvell,pxa25x-pwm",
> + }, {
> + .compatible = "marvell,pxa27x-pwm",
> + .data = (void *)HAS_SECONDARY_PWM
> + }, {
> + .compatible = "marvell,pxa168-pwm",
> + }, {
> + .compatible = "marvell,pxa910-pwm",
> + },
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(of, pxa_pwm_of_match);
> +
> +static int pxa_pwm_parse_data_dt(struct platform_device *pdev,
> + struct pxa_pwm_chip *pwm)
> +{
> + const struct of_device_id *of_id =
> + of_match_device(pxa_pwm_of_match, &pdev->dev);
> + unsigned int npwm;
> +
> + if (!of_id)
> + return -ENODEV;
> +
> + npwm = (unsigned int)of_id->data;
> + pwm->chip.npwm = (npwm & HAS_SECONDARY_PWM) ? 2 : 1;
> +
> + return 0;
> +}
> +
> static int pwm_probe(struct platform_device *pdev)
> {
> const struct platform_device_id *id = platform_get_device_id(pdev);
> @@ -144,7 +180,6 @@ static int pwm_probe(struct platform_device *pdev)
> pwm->chip.dev = &pdev->dev;
> pwm->chip.ops = &pxa_pwm_ops;
> pwm->chip.base = -1;
> - pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
>
> r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> if (r == NULL) {
> @@ -156,6 +191,20 @@ static int pwm_probe(struct platform_device *pdev)
> if (IS_ERR(pwm->mmio_base))
> return PTR_ERR(pwm->mmio_base);
>
> + if (!id) {
> + if (IS_ENABLED(CONFIG_OF))
> + ret = pxa_pwm_parse_data_dt(pdev, pwm);
> + else
> + ret = -ENODEV;
> + } else {
> + pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
> + }

^^ braces not necessarily here, and I'm not really sure if we should check
CONFIG_OF firstly, and leave the platform_device_id thing as a legacy
fall back, what do you think?

if (IS_ENABLED(CONFIG_OF)) {
...
} else {
const struct platform_device_id *id = platform_get_device_id(...);
...
}

> +
> + if (ret) {
> + dev_err(&pdev->dev, "failed to parse data from device id\n");
> + return ret;
> + }
> +
> ret = pwmchip_add(&pwm->chip);
> if (ret < 0) {
> dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
> @@ -181,6 +230,7 @@ static struct platform_driver pwm_driver = {
> .driver = {
> .name = "pxa25x-pwm",
> .owner = THIS_MODULE,
> + .of_match_table = pxa_pwm_of_match,
> },
> .probe = pwm_probe,
> .remove = pwm_remove,
> --
> 1.7.4.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/