Re: [PATCH RFC] clk: Introduce userspace clock driver

From: SÃren Brinkmann
Date: Fri May 10 2013 - 14:04:00 EST


Hi Andy,

first, can you please send plain text email? The formatting gets messed up a
bit for me otherwise.

On Fri, May 10, 2013 at 08:42:34PM +0300, Andy Shevchenko wrote:
> 10.5.2013 20.32 "Soren Brinkmann" <soren.brinkmann@xxxxxxxxxx> kirjoitti:
> >
> > The userspace clock driver can be used to expose clock controls through
> > sysfs to userspace. The driver creates entries in /sys/class/clk.
> >
> > Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> > ---
> > .../devicetree/bindings/clock/clk-userspace.txt | 7 +
> > drivers/clk/Kconfig | 9 ++
> > drivers/clk/Makefile | 1 +
> > drivers/clk/clk-userspace.c | 169
> +++++++++++++++++++++
> > 4 files changed, 186 insertions(+)
> > create mode 100644
> Documentation/devicetree/bindings/clock/clk-userspace.txt
> > create mode 100644 drivers/clk/clk-userspace.c
> >
> > diff --git a/Documentation/devicetree/bindings/clock/clk-userspace.txt
> b/Documentation/devicetree/bindings/clock/clk-userspace.txt
> > new file mode 100644
> > index 0000000..2d153c7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/clk-userspace.txt
> > @@ -0,0 +1,7 @@
> > +
> > +Example:
> > + usclk: usclk {
> > + compatible = "clk-userspace";
> > + clocks = <&foo 15>, <&bar>;
> > + clock-count = <2>;
> > + };
> > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> > index 0357ac4..b35b62c 100644
> > --- a/drivers/clk/Kconfig
> > +++ b/drivers/clk/Kconfig
> > @@ -81,6 +81,15 @@ config COMMON_CLK_AXI_CLKGEN
> > Support for the Analog Devices axi-clkgen pcore clock
> generator for Xilinx
> > FPGAs. It is commonly used in Analog Devices' reference
> designs.
> >
> > +config COMMON_CLK_USERSPACE
> > + bool "Userspace Clock Controls"
> > + depends on OF
> > + depends on SYSFS
> > + help
> > + ---help---
> > + Expose clock controls through sysfs to userspace. Clocks are
> selected
> > + through the device tree and the controls are exposed in
> > + /sys/class/clk.
> > endmenu
> >
> > source "drivers/clk/mvebu/Kconfig"
> > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> > index fa435bc..f2f68c8 100644
> > --- a/drivers/clk/Makefile
> > +++ b/drivers/clk/Makefile
> > @@ -8,6 +8,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o
> > obj-$(CONFIG_COMMON_CLK) += clk-gate.o
> > obj-$(CONFIG_COMMON_CLK) += clk-mux.o
> > obj-$(CONFIG_COMMON_CLK) += clk-composite.o
> > +obj-$(CONFIG_COMMON_CLK_USERSPACE) += clk-userspace.o
> >
> > # SoCs specific
> > obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
> > diff --git a/drivers/clk/clk-userspace.c b/drivers/clk/clk-userspace.c
> > new file mode 100644
> > index 0000000..931cf92
> > --- /dev/null
> > +++ b/drivers/clk/clk-userspace.c
> > @@ -0,0 +1,169 @@
> > +/*
> > + * Userspace clock driver
> > + *
> > + * Copyright (C) 2013 Xilinx
> > + *
> > + * SÃren Brinkmann <soren.brinkmann@xxxxxxxxxx>
> > + *
> > + * This program is free software: you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License v2 as published
> by
> > + * the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program. If not, see
> <http://www.gnu.org/licenses/>.
> > + *
> > + * Expose clock controls through sysfs to userspace.
> > + *
> > + * By writing 0/1 to 'enable' the clock can be disabled/enabled.
> Reading
> > + * that file returns the current state - 0 = disabled, 1 = enabled.
> > + *
> > + * Reading 'set_rate' returns the current clock frequency in Hz.
> Writing
> > + * the file requests setting a new frequency in Hz.
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/fs.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/device.h>
> > +#include <linux/slab.h>
> > +
> > +#define DRIVER_NAME "clk-userspace"
> > +
> > +struct usclk_data {
> > + struct clk *clk;
> > + int enabled;
> > +};
> > +
> > +static ssize_t enable_show(struct device *dev, struct device_attribute
> *attr,
> > + char *buf)
> > +{
> > + struct usclk_data *pdata = dev_get_drvdata(dev);
> > +
> > + return scnprintf(buf, PAGE_SIZE, "%u\n", pdata->enabled);
> > +}
> > +
> > +static ssize_t enable_store(struct device *dev, struct device_attribute
> *attr,
> > + const char *buf, size_t count)
> > +{
> > + unsigned long enable;
> > + int ret;
> > + struct usclk_data *pdata = dev_get_drvdata(dev);
> > +
> > + ret = kstrtoul(buf, 0, &enable);
>
> strbool()?
Can you explain this a little more, please? I grepped the kernel sources for
'strbool' and didn't get a single match.

SÃren


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/