=?y?q?=5BRFC=205/8=5D=20ARM=3Astih41x=3A=20Add=20STiH415=20SOC=20support?=
From: Srinivas KANDAGATLA
Date: Wed May 08 2013 - 10:42:09 EST
From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
The STiH415 is the next generation of HD, AVC set-top box processors for
satellite, cable, terrestrial and IP-STB markets. It is an ARM Cortex-A9
1.0 GHz, dual-core CPU.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
CC: Stephen Gallimore <stephen.gallimore@xxxxxx>
CC: Stuart Menefy <stuart.menefy@xxxxxx>
---
Documentation/arm/STiH41x/overview.txt | 39 ++
Documentation/arm/STiH41x/stih415-overview.txt | 12 +
arch/arm/Kconfig | 3 +
arch/arm/Kconfig.debug | 38 ++
arch/arm/Makefile | 2 +
arch/arm/boot/dts/stih415-clock.dtsi | 38 ++
arch/arm/boot/dts/stih415-pinctrl.dtsi | 480 ++++++++++++++++++++++++
arch/arm/boot/dts/stih415.dtsi | 94 +++++
arch/arm/boot/dts/stih415.h | 20 +
arch/arm/boot/dts/stih41x.dtsi | 30 ++
arch/arm/boot/dts/stixxxx-pincfg.h | 95 +++++
arch/arm/configs/stih41x_defconfig | 94 +++++
arch/arm/include/debug/stixxxx.S | 61 +++
arch/arm/mach-stih41x/Kconfig | 35 ++
arch/arm/mach-stih41x/Makefile | 4 +
arch/arm/mach-stih41x/board-dt.c | 76 ++++
arch/arm/mach-stih41x/stih41x.c | 82 ++++
arch/arm/mach-stih41x/stih41x.h | 7 +
arch/arm/plat-stixxxx/Kconfig | 2 +
arch/arm/plat-stixxxx/Makefile | 2 +
arch/arm/plat-stixxxx/headsmp.S | 44 +++
arch/arm/plat-stixxxx/include/plat/hardware.h | 20 +
arch/arm/plat-stixxxx/include/plat/smp.h | 19 +
arch/arm/plat-stixxxx/platsmp.c | 144 +++++++
24 files changed, 1441 insertions(+), 0 deletions(-)
create mode 100644 Documentation/arm/STiH41x/overview.txt
create mode 100644 Documentation/arm/STiH41x/stih415-overview.txt
create mode 100644 arch/arm/boot/dts/stih415-clock.dtsi
create mode 100644 arch/arm/boot/dts/stih415-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stih415.dtsi
create mode 100644 arch/arm/boot/dts/stih415.h
create mode 100644 arch/arm/boot/dts/stih41x.dtsi
create mode 100644 arch/arm/boot/dts/stixxxx-pincfg.h
create mode 100644 arch/arm/configs/stih41x_defconfig
create mode 100644 arch/arm/include/debug/stixxxx.S
create mode 100644 arch/arm/mach-stih41x/Kconfig
create mode 100644 arch/arm/mach-stih41x/Makefile
create mode 100644 arch/arm/mach-stih41x/board-dt.c
create mode 100644 arch/arm/mach-stih41x/stih41x.c
create mode 100644 arch/arm/mach-stih41x/stih41x.h
create mode 100644 arch/arm/plat-stixxxx/Kconfig
create mode 100644 arch/arm/plat-stixxxx/Makefile
create mode 100644 arch/arm/plat-stixxxx/headsmp.S
create mode 100644 arch/arm/plat-stixxxx/include/plat/hardware.h
create mode 100644 arch/arm/plat-stixxxx/include/plat/smp.h
create mode 100644 arch/arm/plat-stixxxx/platsmp.c
diff --git a/Documentation/arm/STiH41x/overview.txt b/Documentation/arm/STiH41x/overview.txt
new file mode 100644
index 0000000..2411506
--- /dev/null
+++ b/Documentation/arm/STiH41x/overview.txt
@@ -0,0 +1,39 @@
+ STiH41x ARM Linux Overview
+ ==========================
+
+Introduction
+------------
+
+ The ST Microelectronics Multimedia and Application Processors range of
+ CortexA9 System-on-Chip are supported by the 'STixxxx' platform of
+ ARM Linux. Currently STiH415, STiH416 SOCs are supported with both
+ B2000 and B2020 Reference boards.
+
+
+ configuration
+ -------------
+
+ A generic configuration is provided for both STiH415/416, and can be used as the
+ default by
+ make stih41x_defconfig
+
+ Layout
+ ------
+ The common files for multiple machine families (STiH415, STiH416, and STiG125)
+ are located in the platform code contained in arch/arm/plat-stixxxx
+ with headers in plat/.
+ - common files to support Stixxxx SoCs which includes things
+ like platsmp.
+
+ Each machine series have a directory with name arch/arm/mach-sti followed by
+ series name. Like mach-stih41x to support stih415 and stih416.
+
+ There is a generic board board-dt.c in each mach folder which support
+ Flattened Device Tree, which means, It works with any compatible board with
+ Device Trees.
+
+
+ Document Author
+ ---------------
+
+ Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>, (c) 2013 ST Microelectronics
diff --git a/Documentation/arm/STiH41x/stih415-overview.txt b/Documentation/arm/STiH41x/stih415-overview.txt
new file mode 100644
index 0000000..1c264b7
--- /dev/null
+++ b/Documentation/arm/STiH41x/stih415-overview.txt
@@ -0,0 +1,12 @@
+ STiH415 Overview
+ ================
+
+Introduction
+------------
+
+ The STiH415 is the next generation of HD, AVC set-top box processors
+ for satellite, cable, terrestrial and IP-STB markets.
+
+ Features
+ - ARM Cortex-A9 1.0 GHz, dual-core CPU
+ - SATA2×2,USB 2.0×3, PCIe, Gbit Ethernet MAC×2
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c8c524e..b960c7d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1106,6 +1106,9 @@ source "arch/arm/mach-socfpga/Kconfig"
source "arch/arm/plat-spear/Kconfig"
+source "arch/arm/mach-stih41x/Kconfig"
+source "arch/arm/plat-stixxxx/Kconfig"
+
source "arch/arm/mach-s3c24xx/Kconfig"
if ARCH_S3C64XX
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9b31f43..42a5193 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -447,6 +447,16 @@ choice
This option selects UART0 on VIA/Wondermedia System-on-a-chip
devices, including VT8500, WM8505, WM8650 and WM8850.
+ config DEBUG_STIH41X_UART
+ depends on ARCH_STIH41X
+ bool "Use StiH415/416 ASC for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on StiH415/416 based platforms like B2000, B2020.
+ It support UART2 and SBC_UART1.
+
+ If unsure, say N.
+
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
depends on !ARCH_MULTIPLATFORM
@@ -578,6 +588,33 @@ choice
endchoice
+choice
+ prompt "Low-level debug console UART"
+ depends on DEBUG_LL && DEBUG_STIH41X_UART
+
+ config STIH41X_DEBUG_ASC2
+ bool "ASC2 UART"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH415/416 based platforms like b2000, which has
+ default UART wired up to ASC2.
+
+ If unsure, say N.
+
+ config STIH41X_DEBUG_SBC_ASC1
+ bool "SBC ASC1 UART"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH415/416 based platforms like b2020. which has
+ default UART wired up to SBC ASC1.
+
+ If unsure, say N.
+
+endchoice
+
+
+
+
config DEBUG_LL_INCLUDE
string
default "debug/icedcc.S" if DEBUG_ICEDCC
@@ -600,6 +637,7 @@ config DEBUG_LL_INCLUDE
default "debug/vt8500.S" if DEBUG_VT8500_UART0
default "debug/tegra.S" if DEBUG_TEGRA_UART
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
+ default "debug/stixxxx.S" if DEBUG_STIH41X_UART
default "mach/debug-macro.S"
config EARLY_PRINTK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ee4605f..2bb7e7d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -194,6 +194,7 @@ machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx
machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx
machine-$(CONFIG_MACH_SPEAR600) += spear6xx
+machine-$(CONFIG_ARCH_STIH41X) += stih41x
machine-$(CONFIG_ARCH_VIRT) += virt
machine-$(CONFIG_ARCH_ZYNQ) += zynq
machine-$(CONFIG_ARCH_SUNXI) += sunxi
@@ -207,6 +208,7 @@ plat-$(CONFIG_PLAT_ORION) += orion
plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_S3C24XX) += samsung
plat-$(CONFIG_PLAT_S5P) += samsung
+plat-$(CONFIG_PLAT_STIXXXX) += stixxxx
plat-$(CONFIG_PLAT_SPEAR) += spear
plat-$(CONFIG_PLAT_VERSATILE) += versatile
diff --git a/arch/arm/boot/dts/stih415-clock.dtsi b/arch/arm/boot/dts/stih415-clock.dtsi
new file mode 100644
index 0000000..174c799
--- /dev/null
+++ b/arch/arm/boot/dts/stih415-clock.dtsi
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+ clocks {
+ /*
+ * Fixed 30MHz oscillator input to SoC
+ */
+ CLK_SYSIN: CLK_SYSIN {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: arm_periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <500000000>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ CLKS_ICN_REG_0: CLKS_ICN_REG_0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <100000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
new file mode 100644
index 0000000..0f8c770
--- /dev/null
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -0,0 +1,480 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih415.h"
+#include "stixxxx-pincfg.h"
+/ {
+
+ aliases {
+ gpio0 = &PIO0;
+ gpio1 = &PIO1;
+ gpio2 = &PIO2;
+ gpio3 = &PIO3;
+ gpio4 = &PIO4;
+ gpio5 = &PIO5;
+ gpio6 = &PIO6;
+ gpio7 = &PIO7;
+ gpio8 = &PIO8;
+ gpio9 = &PIO9;
+ gpio10 = &PIO10;
+ gpio11 = &PIO11;
+ gpio12 = &PIO12;
+ gpio13 = &PIO13;
+ gpio14 = &PIO14;
+ gpio15 = &PIO15;
+ gpio16 = &PIO16;
+ gpio17 = &PIO17;
+ gpio18 = &PIO18;
+ gpio19 = &PIO100;
+ gpio20 = &PIO101;
+ gpio21 = &PIO102;
+ gpio22 = &PIO103;
+ gpio23 = &PIO104;
+ gpio24 = &PIO105;
+ gpio25 = &PIO106;
+ gpio26 = &PIO107;
+ };
+
+
+ soc {
+ pin-controller {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #retime-delay-cells = <4>;
+ compatible = "st,stixxxx-pinctrl", "simple-bus";
+ st,retime-offset = <&pio_retime_offset>;
+ st,retime-in-delay = <0 500 1000 1500>;
+ st,retime-out-delay = <0 1000 2000 3000>;
+ ranges;
+
+ PIO0: pinctrl@fe610000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfe610000 0x100>;
+ st,bank-name = "PIO0";
+ st,alt-control = <&SYSCFG_SBC(0) 0 31>;
+ st,oe-control = <&SYSCFG_SBC(5) 0 7>;
+ st,pu-control = <&SYSCFG_SBC(7) 0 7>;
+ st,od-control = <&SYSCFG_SBC(9) 0 7>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_SBC(16) 0 31>;
+ st,retime-control1 = <&SYSCFG_SBC(17) 0 31>;
+ };
+ PIO1: pinctrl@fe611000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfe611000 0x100>;
+ st,bank-name = "PIO1";
+ st,alt-control = <&SYSCFG_SBC(1) 0 31>;
+ st,oe-control = <&SYSCFG_SBC(5) 8 15>;
+ st,pu-control = <&SYSCFG_SBC(7) 8 15>;
+ st,od-control = <&SYSCFG_SBC(9) 8 15>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_SBC(18) 0 31>;
+ st,retime-control1 = <&SYSCFG_SBC(19) 0 31>;
+ };
+ PIO2: pinctrl@fe612000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfe612000 0x100>;
+ st,bank-name = "PIO2";
+ st,alt-control = <&SYSCFG_SBC(2) 0 31>;
+ st,oe-control = <&SYSCFG_SBC(5) 16 23>;
+ st,pu-control = <&SYSCFG_SBC(7) 16 23>;
+ st,od-control = <&SYSCFG_SBC(9) 16 23>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_SBC(20) 0 31>;
+ st,retime-control1 = <&SYSCFG_SBC(21) 0 31>;
+ };
+ PIO3: pinctrl@fe613000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfe613000 0x100>;
+ st,bank-name = "PIO3";
+ st,alt-control = <&SYSCFG_SBC(3) 0 31>;
+ st,oe-control = <&SYSCFG_SBC(5) 24 31>;
+ st,pu-control = <&SYSCFG_SBC(7) 24 31>;
+ st,od-control = <&SYSCFG_SBC(9) 24 31>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_SBC(22) 0 31>;
+ st,retime-control1 = <&SYSCFG_SBC(23) 0 31>;
+
+ };
+ PIO4: pinctrl@fe614000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfe614000 0x100>;
+ st,bank-name = "PIO4";
+ st,alt-control = <&SYSCFG_SBC(4) 0 31>;
+ st,oe-control = <&SYSCFG_SBC(6) 0 7>;
+ st,pu-control = <&SYSCFG_SBC(8) 0 7>;
+ st,od-control = <&SYSCFG_SBC(10) 0 7>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_SBC(24) 0 31>;
+ st,retime-control1 = <&SYSCFG_SBC(25) 0 31>;
+
+ };
+ /* 5-12:pinctrl_FRONT */
+ PIO5: pinctrl@fee00000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfee00000 0x100>;
+ st,bank-name = "PIO5";
+ st,alt-control = <&SYSCFG_FRONT(100) 0 31>;
+ st,oe-control = <&SYSCFG_FRONT(108) 0 7>;
+ st,pu-control = <&SYSCFG_FRONT(110) 0 7>;
+ st,od-control = <&SYSCFG_FRONT(112) 0 7>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_FRONT(116) 0 31>;
+ st,retime-control1 = <&SYSCFG_FRONT(117) 0 31>;
+ };
+ PIO6: pinctrl@fee01000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfee01000 0x100>;
+ st,bank-name = "PIO6";
+ st,alt-control = <&SYSCFG_FRONT(101) 0 31>;
+ st,oe-control = <&SYSCFG_FRONT(108) 8 15>;
+ st,pu-control = <&SYSCFG_FRONT(110) 8 15>;
+ st,od-control = <&SYSCFG_FRONT(112) 8 15>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_FRONT(118) 0 31>;
+ st,retime-control1 = <&SYSCFG_FRONT(119) 0 31>;
+ };
+
+ PIO7: pinctrl@fee02000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfee02000 0x100>;
+ st,bank-name = "PIO7";
+ st,alt-control = <&SYSCFG_FRONT(102) 0 31>;
+ st,oe-control = <&SYSCFG_FRONT(108) 16 23>;
+ st,pu-control = <&SYSCFG_FRONT(110) 16 23>;
+ st,od-control = <&SYSCFG_FRONT(112) 16 23>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_FRONT(120) 0 31>;
+ st,retime-control1 = <&SYSCFG_FRONT(121) 0 31>;
+ };
+ PIO8: pinctrl@fee03000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfee03000 0x100>;
+ st,bank-name = "PIO8";
+ st,alt-control = <&SYSCFG_FRONT(103) 0 31>;
+ st,oe-control = <&SYSCFG_FRONT(108) 24 31>;
+ st,pu-control = <&SYSCFG_FRONT(110) 24 31>;
+ st,od-control = <&SYSCFG_FRONT(112) 24 31>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_FRONT(122) 0 31>;
+ st,retime-control1 = <&SYSCFG_FRONT(123) 0 31>;
+ };
+ PIO9: pinctrl@fee04000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfee04000 0x100>;
+ st,bank-name = "PIO9";
+ st,alt-control = <&SYSCFG_FRONT(104) 0 31>;
+ st,oe-control = <&SYSCFG_FRONT(109) 0 7>;
+ st,pu-control = <&SYSCFG_FRONT(111) 0 7>;
+ st,od-control = <&SYSCFG_FRONT(113) 0 7>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_FRONT(124) 0 31>;
+ st,retime-control1 = <&SYSCFG_FRONT(125) 0 31>;
+ };
+ PIO10: pinctrl@fee05000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfee05000 0x100>;
+ st,bank-name = "PIO10";
+ st,alt-control = <&SYSCFG_FRONT(105) 0 31>;
+ st,oe-control = <&SYSCFG_FRONT(109) 8 15>;
+ st,pu-control = <&SYSCFG_FRONT(111) 8 15>;
+ st,od-control = <&SYSCFG_FRONT(113) 8 15>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_FRONT(126) 0 31>;
+ st,retime-control1 = <&SYSCFG_FRONT(127) 0 31>;
+ };
+ PIO11: pinctrl@fee06000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfee06000 0x100>;
+ st,bank-name = "PIO11";
+ st,alt-control = <&SYSCFG_FRONT(106) 0 31>;
+ st,oe-control = <&SYSCFG_FRONT(109) 16 23>;
+ st,pu-control = <&SYSCFG_FRONT(111) 16 23>;
+ st,od-control = <&SYSCFG_FRONT(113) 16 23>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_FRONT(128) 0 31>;
+ st,retime-control1 = <&SYSCFG_FRONT(129) 0 31>;
+ };
+ PIO12: pinctrl@fee07000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfee07000 0x100>;
+ st,bank-name = "PIO12";
+ st,alt-control = <&SYSCFG_FRONT(107) 0 31>;
+ st,oe-control = <&SYSCFG_FRONT(109) 24 31>;
+ st,pu-control = <&SYSCFG_FRONT(111) 24 31>;
+ st,od-control = <&SYSCFG_FRONT(113) 24 31>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_FRONT(130) 0 31>;
+ st,retime-control1 = <&SYSCFG_FRONT(131) 0 31>;
+ };
+ /* 13-18:pinctrl_REAR */
+ PIO13: pinctrl@fe820000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfe820000 0x100>;
+ st,bank-name = "PIO13";
+ st,alt-control = <&SYSCFG_REAR(300) 0 31>;
+ st,oe-control = <&SYSCFG_REAR(306) 0 7>;
+ st,pu-control = <&SYSCFG_REAR(308) 0 7>;
+ st,od-control = <&SYSCFG_REAR(310) 0 7>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_REAR(338) 0 31>;
+ st,retime-control1 = <&SYSCFG_REAR(339) 0 31>;
+ };
+ PIO14: pinctrl@fe821000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfe821000 0x100>;
+ st,bank-name = "PIO14";
+ st,alt-control = <&SYSCFG_REAR(301) 0 31>;
+ st,oe-control = <&SYSCFG_REAR(306) 8 15>;
+ st,pu-control = <&SYSCFG_REAR(308) 8 15>;
+ st,od-control = <&SYSCFG_REAR(310) 8 15>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_REAR(340) 0 31>;
+ st,retime-control1 = <&SYSCFG_REAR(341) 0 31>;
+ };
+ PIO15: pinctrl@fe822000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfe822000 0x100>;
+ st,bank-name = "PIO15";
+ st,alt-control = <&SYSCFG_REAR(302) 0 31>;
+ st,oe-control = <&SYSCFG_REAR(306) 16 23>;
+ st,pu-control = <&SYSCFG_REAR(308) 16 23>;
+ st,od-control = <&SYSCFG_REAR(310) 16 23>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_REAR(342) 0 31>;
+ st,retime-control1 = <&SYSCFG_REAR(343) 0 31>;
+ };
+ PIO16: pinctrl@fe823000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfe823000 0x100>;
+ st,bank-name = "PIO16";
+ st,alt-control = <&SYSCFG_REAR(303) 0 31>;
+ st,oe-control = <&SYSCFG_REAR(306) 24 31>;
+ st,pu-control = <&SYSCFG_REAR(308) 24 31>;
+ st,od-control = <&SYSCFG_REAR(310) 24 31>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_REAR(344) 0 31>;
+ st,retime-control1 = <&SYSCFG_REAR(345) 0 31>;
+
+ };
+ PIO17: pinctrl@fe824000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfe824000 0x100>;
+ st,bank-name = "PIO17";
+ st,alt-control = <&SYSCFG_REAR(304) 0 31>;
+ st,oe-control = <&SYSCFG_REAR(307) 0 7>;
+ st,pu-control = <&SYSCFG_REAR(309) 0 7>;
+ st,od-control = <&SYSCFG_REAR(311) 0 7>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_REAR(346) 0 31>;
+ st,retime-control1 = <&SYSCFG_REAR(347) 0 31>;
+
+ };
+ PIO18: pinctrl@fe825000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfe825000 0x100>;
+ st,bank-name = "PIO18";
+ st,alt-control = <&SYSCFG_REAR(305) 0 31>;
+ st,oe-control = <&SYSCFG_REAR(307) 8 15>;
+ st,pu-control = <&SYSCFG_REAR(309) 8 15>;
+ st,od-control = <&SYSCFG_REAR(311) 8 15>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_REAR(348) 0 31>;
+ st,retime-control1 = <&SYSCFG_REAR(349) 0 31>;
+
+ };
+ /* MPE */
+ /* 100-102:pinctrl_RIGHT (aka MPE_pinctrl) */
+ PIO100: pinctrl@fd6b0000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfd6b0000 0x100>;
+ st,bank-name = "PIO100";
+ st,alt-control = <&SYSCFG_LEFT(400) 0 31>;
+ st,oe-control = <&SYSCFG_LEFT(403) 0 7>;
+ st,pu-control = <&SYSCFG_LEFT(404) 0 7>;
+ st,od-control = <&SYSCFG_LEFT(405) 0 7>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_LEFT(406) 0 31>;
+ st,retime-control1 = <&SYSCFG_LEFT(407) 0 31>;
+ };
+ PIO101: pinctrl@fd6b1000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfd6b1000 0x100>;
+ st,bank-name = "PIO101";
+ st,alt-control = <&SYSCFG_LEFT(401) 0 31>;
+ st,oe-control = <&SYSCFG_LEFT(403) 8 15>;
+ st,pu-control = <&SYSCFG_LEFT(404) 8 15>;
+ st,od-control = <&SYSCFG_LEFT(405) 8 15>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_LEFT(408) 0 31>;
+ st,retime-control1 = <&SYSCFG_LEFT(409) 0 31>;
+
+ };
+ PIO102: pinctrl@fd6b2000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfd6b2000 0x100>;
+ st,bank-name = "PIO102";
+ st,alt-control = <&SYSCFG_LEFT(402) 0 31>;
+ st,oe-control = <&SYSCFG_LEFT(403) 16 23>;
+ st,pu-control = <&SYSCFG_LEFT(404) 16 23>;
+ st,od-control = <&SYSCFG_LEFT(405) 16 23>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_LEFT(410) 0 31>;
+ st,retime-control1 = <&SYSCFG_LEFT(411) 0 31>;
+
+ };
+ /* 103-107:pinctrl_LEFT (aka pinctrl_1_MPE) */
+ PIO103: pinctrl@fd330000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfd330000 0x100>;
+ st,bank-name = "PIO103";
+ st,alt-control = <&SYSCFG_RIGHT(500) 0 31>;
+ st,oe-control = <&SYSCFG_RIGHT(505) 0 7>;
+ st,pu-control = <&SYSCFG_RIGHT(507) 0 7>;
+ st,od-control = <&SYSCFG_RIGHT(509) 0 7>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_RIGHT(511) 0 31>;
+ st,retime-control1 = <&SYSCFG_RIGHT(512) 0 31>;
+ };
+ PIO104: pinctrl@fd331000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfd331000 0x100>;
+ st,bank-name = "PIO104";
+ st,alt-control = <&SYSCFG_RIGHT(501) 0 31>;
+ st,oe-control = <&SYSCFG_RIGHT(505) 8 15>;
+ st,pu-control = <&SYSCFG_RIGHT(507) 8 15>;
+ st,od-control = <&SYSCFG_RIGHT(509) 8 15>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_RIGHT(513) 0 31>;
+ st,retime-control1 = <&SYSCFG_RIGHT(514) 0 31>;
+ };
+ PIO105: pinctrl@fd332000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfd332000 0x100>;
+ st,bank-name = "PIO105";
+ st,alt-control = <&SYSCFG_RIGHT(502) 0 31>;
+ st,oe-control = <&SYSCFG_RIGHT(505) 16 23>;
+ st,pu-control = <&SYSCFG_RIGHT(507) 16 23>;
+ st,od-control = <&SYSCFG_RIGHT(509) 16 23>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_RIGHT(515) 0 31>;
+ st,retime-control1 = <&SYSCFG_RIGHT(516) 0 31>;
+ };
+ PIO106: pinctrl@fd333000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfd333000 0x100>;
+ st,bank-name = "PIO106";
+ st,alt-control = <&SYSCFG_RIGHT(503) 0 31>;
+ st,oe-control = <&SYSCFG_RIGHT(505) 24 31>;
+ st,pu-control = <&SYSCFG_RIGHT(507) 24 31>;
+ st,od-control = <&SYSCFG_RIGHT(509) 24 31>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_RIGHT(517) 0 31>;
+ st,retime-control1 = <&SYSCFG_RIGHT(518) 0 31>;
+ };
+ PIO107: pinctrl@fd334000 {
+ gpio-controller;
+ #gpio-cells = <1>;
+ compatible = "st,stixxxx-gpio";
+ reg = <0xfd334000 0x100>;
+ st,bank-name = "PIO107";
+ st,alt-control = <&SYSCFG_RIGHT(504) 0 31>;
+ st,oe-control = <&SYSCFG_RIGHT(506) 0 7>;
+ st,pu-control = <&SYSCFG_RIGHT(508) 0 7>;
+ st,od-control = <&SYSCFG_RIGHT(510) 0 7>;
+ st,retime-style = "packed";
+ st,retime-control0 = <&SYSCFG_RIGHT(519) 0 31>;
+ st,retime-control1 = <&SYSCFG_RIGHT(520) 0 31>;
+ };
+
+ uart2 {
+ pinctrl_uart2: uart2-0 {
+ st,function = <ALT2>;
+ st,pins {
+ tx = <&PIO17 4 OUT>;
+ rx = <&PIO17 5 IN>;
+ };
+ };
+ };
+
+ sbc_uart1 {
+ pinctrl_sbc_uart1: sbc_uart1 {
+ st,function = <ALT3>;
+ st,pins {
+ tx = <&PIO2 6 OUT>;
+ rx = <&PIO2 7 IN>;
+ };
+ };
+ };
+
+ };
+
+ pio_retime_offset: pio-retime-offset {
+ clk1notclk0 = <0>;
+ delay-lsb = <2>;
+ delay-msb = <3>;
+ invertclk = <4>;
+ retime = <5>;
+ clknotdata = <6>;
+ double-edge = <7>;
+ };
+
+ };
+};
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
new file mode 100644
index 0000000..b881d22
--- /dev/null
+++ b/arch/arm/boot/dts/stih415.dtsi
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih41x.dtsi"
+#include "stih415-clock.dtsi"
+#include "stih415-pinctrl.dtsi"
+/ {
+
+ L2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0xfffe2000 0x1000>;
+ arm,data-latency = <3 2 2>;
+ arm,tag-latency = <1 1 1>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&intc>;
+ ranges;
+ compatible = "simple-bus";
+
+ syscfg_sbc: syscon@fe600000{
+ compatible = "syscon";
+ reg = <0xfe600000 0xb4>;
+ syscon-name = "SYSCFG_SBC";
+ };
+
+ syscfg_front: syscon@fee10000{
+ compatible = "syscon";
+ reg = <0xfee10000 0x194>;
+ syscon-name = "SYSCFG_FRONT";
+ };
+
+ syscfg_rear: syscon@fe830000{
+ compatible = "syscon";
+ reg = <0xfe830000 0x190>;
+ syscon-name = "SYSCFG_REAR";
+ };
+
+ syscfg_left: syscon@fd690000{
+ compatible = "syscon";
+ reg = <0xfd690000 0x78>;
+ syscon-name = "SYSCFG_LEFT";
+ };
+
+ syscfg_right: syscon@fd320000{
+ compatible = "syscon";
+ reg = <0xfd320000 0x180>;
+ syscon-name = "SYSCFG_RIGHT";
+ };
+
+ syscfg_system: syscon@fdde0000 {
+ compatible = "syscon";
+ reg = <0xfdde0000 0x15c>;
+ syscon-name = "SYSCFG_SYSTEM";
+ };
+
+ syscfg_lpm: syscon@fe4b5100{
+ compatible = "syscon";
+ reg = <0xfe4b5100 0x08>;
+ syscon-name = "LPM_CFG_REGS";
+ };
+
+ uart2: uart@fed32000 {
+ compatible = "st,asc";
+ status = "disabled";
+ reg = <0xfed32000 0x2c>;
+ interrupts = <0 197 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ clocks = <&CLKS_ICN_REG_0>;
+ };
+
+ /* SBC comms block ASCs in SASG1 */
+ sbc_uart1: uart@fe531000 {
+ compatible = "st,asc";
+ status = "disabled";
+ reg = <0xfe531000 0x2c>;
+ interrupts = <0 210 0>;
+ clocks = <&CLK_SYSIN>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_uart1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stih415.h b/arch/arm/boot/dts/stih415.h
new file mode 100644
index 0000000..fc46ecc
--- /dev/null
+++ b/arch/arm/boot/dts/stih415.h
@@ -0,0 +1,20 @@
+#ifndef __STIH415_H_
+#define __STIH415_H_
+
+#define CONFIG_SBC(num) (num)
+#define CONFIG_FRONT(num) (num - 100)
+#define CONFIG_REAR(num) (num - 300)
+#define CONFIG_LEFT(num) (num - 400)
+#define CONFIG_RIGHT(num) (num - 500)
+#define CONFIG_SYSTEM(num) (num - 600)
+#define CONFIG_LPM(num) (num)
+
+#define SYSCFG_SBC(num) syscfg_sbc CONFIG_SBC(num)
+#define SYSCFG_FRONT(num) syscfg_front CONFIG_FRONT(num)
+#define SYSCFG_REAR(num) syscfg_rear CONFIG_REAR(num)
+#define SYSCFG_LEFT(num) syscfg_left CONFIG_LEFT(num)
+#define SYSCFG_RIGHT(num) syscfg_right CONFIG_RIGHT(num)
+#define SYSCFG_SYSTEM(num) syscfg_system CONFIG_SYSTEM(num)
+#define SYSCFG_LPM(num) syscfg_lpm CONFIG_LPM(num)
+
+#endif /* __STIH415_H_ */
diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi
new file mode 100644
index 0000000..a7f0fa4
--- /dev/null
+++ b/arch/arm/boot/dts/stih41x.dtsi
@@ -0,0 +1,30 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ };
+ };
+
+ intc: interrupt-controller@fffe1000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xfffe1000 0x1000>,
+ <0xfffe0100 0x100>;
+ };
+
+ timer@fffe0200 {
+ #interrupt-cells = <3>;
+ interrupt-parent = <&intc>;
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0xfffe0200 0x100>;
+ interrupts = <1 11 0x04>;
+ clocks = <&arm_periph_clk>;
+ };
+};
diff --git a/arch/arm/boot/dts/stixxxx-pincfg.h b/arch/arm/boot/dts/stixxxx-pincfg.h
new file mode 100644
index 0000000..5398ff2
--- /dev/null
+++ b/arch/arm/boot/dts/stixxxx-pincfg.h
@@ -0,0 +1,95 @@
+#ifndef _ST_PINCFG_H_
+#define _ST_PINCFG_H
+
+/* Alternate functions */
+#define ALT1 1
+#define ALT2 2
+#define ALT3 3
+#define ALT4 4
+#define ALT5 5
+#define ALT6 6
+#define ALT7 7
+
+/* Output enable */
+#define OE_MASK 0x1
+#define OE_SHIFT 27
+#define OE (1 << OE_SHIFT)
+
+/* Pull Up */
+#define PU_MASK 0x1
+#define PU_SHIFT 26
+#define PU (1 << PU_SHIFT)
+
+/* Open Drain */
+#define OD_MASK 0x1
+#define OD_SHIFT 25
+#define OD (1 << OD_SHIFT)
+
+#define RT_MASK 0x1
+#define RT_SHIFT 23
+#define RT (1 << RT_SHIFT)
+
+#define INVERTCLK_MASK 0x1
+#define INVERTCLK_SHIFT 22
+#define INVERTCLK (1 << INVERTCLK_SHIFT)
+
+#define CLKNOTDATA_MASK 0x1
+#define CLKNOTDATA_SHIFT 21
+#define CLKNOTDATA (1 << CLKNOTDATA_SHIFT)
+
+#define DOUBLE_EDGE_MASK 0x1
+#define DOUBLE_EDGE_SHIFT 20
+#define DOUBLE_EDGE (1 << DOUBLE_EDGE_SHIFT)
+
+#define CLK_MASK 0x3
+#define CLK_SHIFT 18
+#define CLK_A (0 << CLK_SHIFT)
+#define CLK_B (1 << CLK_SHIFT)
+#define CLK_C (2 << CLK_SHIFT)
+#define CLK_D (3 << CLK_SHIFT)
+
+/* User-frendly defines for Pin Direction */
+ /* oe = 0, pu = 0, od = 0 */
+#define IN (0)
+ /* oe = 0, pu = 1, od = 0 */
+#define IN_PU (PU)
+ /* oe = 1, pu = 0, od = 0 */
+#define OUT (OE)
+ /* oe = 1, pu = 0, od = 1 */
+#define BIDIR (OE | OD)
+ /* oe = 1, pu = 1, od = 1 */
+#define BIDIR_PU (OE | PU | OD)
+
+/* RETIME_TYPE */
+/*
+ * B Mode
+ * Bypass retime with optional delay parameter
+ */
+#define BYPASS (0)
+/*
+ * R0, R1, R0D, R1D modes
+ * single-edge data non inverted clock, retime data with clk
+ */
+#define SE_NICLK_IO (RT)
+/*
+ * RIV0, RIV1, RIV0D, RIV1D modes
+ * single-edge data inverted clock, retime data with clk
+ */
+#define SE_ICLK_IO (RT | INVERTCLK)
+/*
+ * R0E, R1E, R0ED, R1ED modes
+ * double-edge data, retime data with clk
+ */
+#define DE_IO (RT | DOUBLE_EDGE)
+/*
+ * CIV0, CIV1 modes with inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define ICLK (RT | CLKNOTDATA | INVERTCLK)
+/*
+ * CLK0, CLK1 modes with non-inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define NICLK (RT | CLKNOTDATA)
+#endif /* _ST_PINCFG_H */
+
diff --git a/arch/arm/configs/stih41x_defconfig b/arch/arm/configs/stih41x_defconfig
new file mode 100644
index 0000000..dd9268b
--- /dev/null
+++ b/arch/arm/configs/stih41x_defconfig
@@ -0,0 +1,94 @@
+CONFIG_LOCALVERSION="-STiH41x"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_NAMESPACES=y
+CONFIG_RELAY=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_ARCH_STIH41X=y
+CONFIG_SOC_STIH415=y
+# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
+# CONFIG_SWP_EMULATE is not set
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_PL310_ERRATA_753970=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_PL310_ERRATA_769419=y
+CONFIG_SMP=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_KSM=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_DEBUG_DEVRES=y
+# CONFIG_BLK_DEV is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_COMMON_CLK_DEBUG=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_XFS_FS=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_STIH41X_UART=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SECURITYFS=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_T10DIF=y
diff --git a/arch/arm/include/debug/stixxxx.S b/arch/arm/include/debug/stixxxx.S
new file mode 100644
index 0000000..7bc02a7
--- /dev/null
+++ b/arch/arm/include/debug/stixxxx.S
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/include/debug/stixxxx.S
+ *
+ * Debugging macro include header
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define STIH41X_COMMS_BASE 0xfed00000
+#define STIH41X_ASC2_BASE (STIH41X_COMMS_BASE+0x32000)
+
+#define STIH41X_SBC_LPM_BASE 0xfe400000
+#define STIH41X_SBC_COMMS_BASE (STIH41X_SBC_LPM_BASE + 0x100000)
+#define STIH41X_SBC_ASC1_BASE (STIH41X_SBC_COMMS_BASE + 0x31000)
+
+
+#define VIRT_ADDRESS(x) (x - 0x1000000)
+
+#if IS_ENABLED(CONFIG_STIH41X_DEBUG_ASC2)
+#define DEBUG_LL_UART_BASE STIH41X_ASC2_BASE
+#endif
+
+#if IS_ENABLED(CONFIG_STIH41X_DEBUG_SBC_ASC1)
+#define DEBUG_LL_UART_BASE STIH41X_SBC_ASC1_BASE
+#endif
+
+#ifndef DEBUG_LL_UART_BASE
+#error "DEBUG UART is not Configured"
+#endif
+
+#define ASC_TX_BUF_OFF 0x04
+#define ASC_CTRL_OFF 0x0c
+#define ASC_STA_OFF 0x14
+
+#define ASC_STA_TX_FULL (1<<9)
+#define ASC_STA_TX_EMPTY (1<<1)
+
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =DEBUG_LL_UART_BASE @ physical base
+ ldr \rv, =VIRT_ADDRESS(DEBUG_LL_UART_BASE) @ virt base
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #ASC_TX_BUF_OFF]
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #ASC_STA_OFF]
+ tst \rd, #ASC_STA_TX_FULL
+ bne 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #ASC_STA_OFF]
+ tst \rd, #ASC_STA_TX_EMPTY
+ beq 1001b
+ .endm
diff --git a/arch/arm/mach-stih41x/Kconfig b/arch/arm/mach-stih41x/Kconfig
new file mode 100644
index 0000000..9c40540
--- /dev/null
+++ b/arch/arm/mach-stih41x/Kconfig
@@ -0,0 +1,35 @@
+config ARCH_STIH41X
+ bool "STMicroelectronics STiH41x SOCs with Flattened Device Tree" if ARCH_MULTI_V7
+ select GENERIC_CLOCKEVENTS
+ select CLKDEV_LOOKUP
+ select ARM_GIC
+ select HAVE_ARM_GT
+ select PINCTRL
+ select PINCTRL_STIXXXX
+ select MIGHT_HAVE_CACHE_L2X0
+ select HAVE_SMP
+ select GPIOLIB
+ select MACH_STIH41X_GENERIC
+ help
+ Include support for STiH41x SOCs like STiH415/416 using the device tree
+ for discovery
+ More information at Documentation/arm/STiH41x and
+ at Documentation/devicetree
+
+config MACH_STIH41X_GENERIC
+ bool
+
+if ARCH_STIH41X
+menu "STMicroelectronics Consumer Electronics SOCs"
+
+config SOC_STIH415
+ bool "STiH415 STMicroelectronics Consumer Electronics family"
+ select PLAT_STIXXXX
+ help
+ This enables support for STMicroelectronics Digital Consumer
+ Electronics family StiH415 parts, primarily targetted at set-top-box
+ and other digital audio/video applications using Flattned Device
+ Trees.
+
+endmenu
+endif
diff --git a/arch/arm/mach-stih41x/Makefile b/arch/arm/mach-stih41x/Makefile
new file mode 100644
index 0000000..91d6863
--- /dev/null
+++ b/arch/arm/mach-stih41x/Makefile
@@ -0,0 +1,4 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+ -I$(srctree)/arch/arm/plat-stixxxx/include
+obj-y := stih41x.o
+obj-$(CONFIG_MACH_STIH41X_GENERIC) += board-dt.o
diff --git a/arch/arm/mach-stih41x/board-dt.c b/arch/arm/mach-stih41x/board-dt.c
new file mode 100644
index 0000000..c51e2c9
--- /dev/null
+++ b/arch/arm/mach-stih41x/board-dt.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author(s): Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
+
+#include <asm/mach/arch.h>
+
+#include <plat/smp.h>
+#include <plat/hardware.h>
+
+#include "stih41x.h"
+
+static void __init stih41x_timer_init(void)
+{
+ of_clk_init(NULL);
+ clocksource_of_init();
+ stih41x_l2x0_init();
+}
+
+/*
+ * A basic implementation of irq_set_wake that ensures wakeup source
+ * interrupts are not disabled during PM_SUSPEND_FREEZE.
+ */
+static int stih41x_set_wake(struct irq_data *d, unsigned int on)
+{
+ struct irq_desc *desc = irq_to_desc(d->irq);
+
+ if (on) {
+ if (desc->action)
+ desc->action->flags |= IRQF_NO_SUSPEND;
+ } else {
+ if (desc->action)
+ desc->action->flags &= ~IRQF_NO_SUSPEND;
+ }
+ return 0;
+}
+
+static void __init stih41x_irq_init(void)
+{
+ gic_arch_extn.irq_set_wake = stih41x_set_wake;
+ gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND;
+
+ irqchip_init();
+}
+
+void __init stih41x_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ NULL, NULL);
+ return;
+}
+
+static const char *stih41x_dt_match[] __initdata = {
+ NULL
+};
+
+DT_MACHINE_START(STM, "STiH415 SoC with Flattened Device Tree")
+ .map_io = stih41x_map_io,
+ .init_time = stih41x_timer_init,
+ .init_machine = stih41x_dt_init,
+ .smp = smp_ops(stixxxx_smp_ops),
+ .init_irq = stih41x_irq_init,
+ .dt_compat = stih41x_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-stih41x/stih41x.c b/arch/arm/mach-stih41x/stih41x.c
new file mode 100644
index 0000000..b76cac1
--- /dev/null
+++ b/arch/arm/mach-stih41x/stih41x.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author(s): Srinivas Kandagatla <srinivas.kandagatla@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/bug.h>
+
+#include <asm/mach/map.h>
+#include <asm/page.h>
+#include <asm/mach/arch.h>
+
+#include <plat/smp.h>
+#include <plat/hardware.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#define MPE41_SCU_BASE (0xFFFE0000 + 0x0000)
+
+#define STIH41X_COMMS_BASE 0xFED00000
+#define STIH41X_ASC0_BASE (STIH41X_COMMS_BASE+0x30000)
+#define STIH41X_ASC1_BASE (STIH41X_COMMS_BASE+0x31000)
+#define STIH41X_ASC2_BASE (STIH41X_COMMS_BASE+0x32000)
+#define STIH41X_ASC3_BASE (STIH41X_COMMS_BASE+0x33000)
+
+#define STIH41X_SBC_LPM_BASE 0xfe400000
+#define STIH41X_SBC_COMMS_BASE (STIH41X_SBC_LPM_BASE + 0x100000)
+#define STIH41X_SBC_ASC0_BASE (STIH41X_SBC_COMMS_BASE + 0x30000)
+#define STIH41X_SBC_ASC1_BASE (STIH41X_SBC_COMMS_BASE + 0x31000)
+
+
+static struct map_desc stih41x_io_desc[] __initdata = {
+#ifdef CONFIG_SMP
+ {
+ .virtual = IO_ADDRESS(MPE41_SCU_BASE),
+ .pfn = __phys_to_pfn(MPE41_SCU_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#endif
+#ifdef CONFIG_STIH41X_DEBUG_ASC2
+ { /* For DEBUG_LL and Early Prints */
+ .virtual = IO_ADDRESS(STIH41X_ASC2_BASE),
+ .pfn = __phys_to_pfn(STIH41X_ASC2_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#endif
+#ifdef CONFIG_STIH41X_DEBUG_SBC_ASC1
+ {
+ .virtual = IO_ADDRESS(STIH41X_SBC_ASC1_BASE),
+ .pfn = __phys_to_pfn(STIH41X_SBC_ASC1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#endif
+};
+
+void __init stih41x_map_io(void)
+{
+#ifdef CONFIG_SMP
+ stixxxx_scu_base_addr = ((void __iomem *)IO_ADDRESS(MPE41_SCU_BASE));
+#endif
+ iotable_init(stih41x_io_desc, ARRAY_SIZE(stih41x_io_desc));
+}
+
+void __init stih41x_l2x0_init(void)
+{
+ u32 way_size = 0x4;
+ u32 aux_ctrl;
+
+ aux_ctrl = (0x1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
+ (0x1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
+ (0x1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
+ (way_size << L2X0_AUX_CTRL_WAY_SIZE_SHIFT);
+
+ l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK);
+}
diff --git a/arch/arm/mach-stih41x/stih41x.h b/arch/arm/mach-stih41x/stih41x.h
new file mode 100644
index 0000000..6c0e90b
--- /dev/null
+++ b/arch/arm/mach-stih41x/stih41x.h
@@ -0,0 +1,7 @@
+#ifndef __STIH41X_H_
+#define __STIH41X_H_
+
+void stih41x_map_io(void);
+void stih41x_l2x0_init(void);
+
+#endif /* __STIH41X_H_ */
diff --git a/arch/arm/plat-stixxxx/Kconfig b/arch/arm/plat-stixxxx/Kconfig
new file mode 100644
index 0000000..ceeda96
--- /dev/null
+++ b/arch/arm/plat-stixxxx/Kconfig
@@ -0,0 +1,2 @@
+config PLAT_STIXXXX
+ bool
diff --git a/arch/arm/plat-stixxxx/Makefile b/arch/arm/plat-stixxxx/Makefile
new file mode 100644
index 0000000..36534a9
--- /dev/null
+++ b/arch/arm/plat-stixxxx/Makefile
@@ -0,0 +1,2 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
diff --git a/arch/arm/plat-stixxxx/headsmp.S b/arch/arm/plat-stixxxx/headsmp.S
new file mode 100644
index 0000000..3dd5c04
--- /dev/null
+++ b/arch/arm/plat-stixxxx/headsmp.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-stixxxx/headsmp.S
+ *
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * http://www.st.com
+ *
+ * Cloned from linux/arch/arm/mach-vexpress/headsmp.S
+ *
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __INIT
+
+/*
+ * ST specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(stixxxx_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #15
+ adr r4, 1f
+ ldmia r4, {r5, r6}
+ sub r4, r4, r5
+ add r6, r6, r4
+pen: ldr r7, [r6]
+ cmp r7, r0
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
+1: .long .
+ .long pen_release
diff --git a/arch/arm/plat-stixxxx/include/plat/hardware.h b/arch/arm/plat-stixxxx/include/plat/hardware.h
new file mode 100644
index 0000000..7a9a804
--- /dev/null
+++ b/arch/arm/plat-stixxxx/include/plat/hardware.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-stixxxx/include/mach/hardware.h
+ *
+ * Copyright (C) 2013 STMicroelectronics Limited.
+ * Author: Stuart Menefy <stuart.menefy@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_HARDWARE_H
+#define __PLAT_HARDWARE_H
+/*
+ * Statically mapped addresses:
+ *
+ * fc000000 to ffffffff (physical) -> fb000000 to feffffff (virtual)
+ */
+#define IO_ADDRESS(x) (((x) & 0x03ffffff) + 0xfb000000)
+#endif
diff --git a/arch/arm/plat-stixxxx/include/plat/smp.h b/arch/arm/plat-stixxxx/include/plat/smp.h
new file mode 100644
index 0000000..c3e3d40
--- /dev/null
+++ b/arch/arm/plat-stixxxx/include/plat/smp.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-stixxxx/platsmp.c
+ *
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * http://www.st.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_SMP_H
+#define __PLAT_SMP_H
+
+extern struct smp_operations stixxxx_smp_ops;
+extern void __iomem *stixxxx_scu_base_addr;
+extern void stixxxx_secondary_startup(void);
+
+#endif
diff --git a/arch/arm/plat-stixxxx/platsmp.c b/arch/arm/plat-stixxxx/platsmp.c
new file mode 100644
index 0000000..256640d
--- /dev/null
+++ b/arch/arm/plat-stixxxx/platsmp.c
@@ -0,0 +1,144 @@
+/*
+ * arch/arm/plat-stixxxx/platsmp.c
+ *
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * http://www.st.com
+ *
+ * Cloned from linux/arch/arm/mach-vexpress/platsmp.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#include <plat/hardware.h>
+#include <plat/smp.h>
+
+
+void __iomem *stixxxx_scu_base_addr;
+
+static void __cpuinit write_pen_release(int val)
+{
+ pen_release = val;
+ smp_wmb();
+ __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+ outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
+static inline unsigned int get_core_count(void)
+{
+ return scu_get_core_count(stixxxx_scu_base_addr);
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit stixxxx_secondary_init(unsigned int cpu)
+{
+ trace_hardirqs_off();
+
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_secondary_init(0);
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ write_pen_release(-1);
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit stixxxx_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ *
+ * Note that "pen_release" is the hardware CPU ID, whereas
+ * "cpu" is Linux's internal ID.
+ */
+ write_pen_release(cpu_logical_map(cpu));
+
+ /*
+ * Send the secondary CPU a soft interrupt, thereby causing
+ * it to jump to the secondary entrypoint.
+ */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ smp_rmb();
+ if (pen_release == -1)
+ break;
+
+ udelay(10);
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init stixxxx_smp_init_cpus(void)
+{
+ unsigned int i, ncores = get_core_count();
+
+ if (ncores > nr_cpu_ids) {
+ pr_warn("STM: %u greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+void __init stixxxx_smp_prepare_cpus(unsigned int max_cpus)
+{
+ scu_enable(stixxxx_scu_base_addr);
+}
+
+struct smp_operations __initdata stixxxx_smp_ops = {
+ .smp_init_cpus = stixxxx_smp_init_cpus,
+ .smp_prepare_cpus = stixxxx_smp_prepare_cpus,
+ .smp_secondary_init = stixxxx_secondary_init,
+ .smp_boot_secondary = stixxxx_boot_secondary,
+};
--
1.7.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/