[PATCH 2/3] gianfar: Use netdev_<level> when possible

From: Joe Perches
Date: Sun Apr 14 2013 - 01:03:50 EST


Use a more current logging style.

Convert pr_<level> to netdev_<level> when a struct net_device is
available. Add pr_fmt and neaten other formats too.

Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/net/ethernet/freescale/gianfar_ethtool.c | 24 +++++++++++++-----------
drivers/net/ethernet/freescale/gianfar_ptp.c | 3 +++
drivers/net/ethernet/freescale/gianfar_sysfs.c | 2 +-
3 files changed, 17 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
index 4e7118f..083603f 100644
--- a/drivers/net/ethernet/freescale/gianfar_ethtool.c
+++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c
@@ -389,14 +389,14 @@ static int gfar_scoalesce(struct net_device *dev,

/* Check the bounds of the values */
if (cvals->rx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
- pr_info("Coalescing is limited to %d microseconds\n",
- GFAR_MAX_COAL_USECS);
+ netdev_info(dev, "Coalescing is limited to %d microseconds\n",
+ GFAR_MAX_COAL_USECS);
return -EINVAL;
}

if (cvals->rx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) {
- pr_info("Coalescing is limited to %d frames\n",
- GFAR_MAX_COAL_FRAMES);
+ netdev_info(dev, "Coalescing is limited to %d frames\n",
+ GFAR_MAX_COAL_FRAMES);
return -EINVAL;
}

@@ -418,14 +418,14 @@ static int gfar_scoalesce(struct net_device *dev,

/* Check the bounds of the values */
if (cvals->tx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
- pr_info("Coalescing is limited to %d microseconds\n",
- GFAR_MAX_COAL_USECS);
+ netdev_info(dev, "Coalescing is limited to %d microseconds\n",
+ GFAR_MAX_COAL_USECS);
return -EINVAL;
}

if (cvals->tx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) {
- pr_info("Coalescing is limited to %d frames\n",
- GFAR_MAX_COAL_FRAMES);
+ netdev_info(dev, "Coalescing is limited to %d frames\n",
+ GFAR_MAX_COAL_FRAMES);
return -EINVAL;
}

@@ -735,7 +735,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow,
cmp_rqfpr = RQFPR_IPV6 |RQFPR_UDP;
break;
default:
- pr_err("Right now this class is not supported\n");
+ netdev_err(priv->ndev,
+ "Right now this class is not supported\n");
ret = 0;
goto err;
}
@@ -751,7 +752,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow,
}

if (i == MAX_FILER_IDX + 1) {
- pr_err("No parse rule found, can't create hash rules\n");
+ netdev_err(priv->ndev,
+ "No parse rule found, can't create hash rules\n");
ret = 0;
goto err;
}
@@ -1568,7 +1570,7 @@ static int gfar_process_filer_changes(struct gfar_private *priv)
gfar_cluster_filer(tab);
gfar_optimize_filer_masks(tab);

- pr_debug("\n\tSummary:\n"
+ pr_debug("\tSummary:\n"
"\tData on hardware: %d\n"
"\tCompression rate: %d%%\n",
tab->index, 100 - (100 * tab->index) / i);
diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c
index 2e5daee..fe8e9e5 100644
--- a/drivers/net/ethernet/freescale/gianfar_ptp.c
+++ b/drivers/net/ethernet/freescale/gianfar_ptp.c
@@ -17,6 +17,9 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/device.h>
#include <linux/hrtimer.h>
#include <linux/init.h>
diff --git a/drivers/net/ethernet/freescale/gianfar_sysfs.c b/drivers/net/ethernet/freescale/gianfar_sysfs.c
index cd14a4d..acb55af 100644
--- a/drivers/net/ethernet/freescale/gianfar_sysfs.c
+++ b/drivers/net/ethernet/freescale/gianfar_sysfs.c
@@ -337,5 +337,5 @@ void gfar_init_sysfs(struct net_device *dev)
rc |= device_create_file(&dev->dev, &dev_attr_fifo_starve);
rc |= device_create_file(&dev->dev, &dev_attr_fifo_starve_off);
if (rc)
- dev_err(&dev->dev, "Error creating gianfar sysfs files.\n");
+ dev_err(&dev->dev, "Error creating gianfar sysfs files\n");
}
--
1.8.1.2.459.gbcd45b4.dirty

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/