[ 063/171 ] USB: xhci - fix bit definitions for IMAN register

[Steven Rostedt]

3.6.11.2 stable review patch.
If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dtor@xxxxxxxxxx>

[ Upstream commit f8264340e694604863255cc0276491d17c402390 ]

According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1
of IMAN register. Previously their definitions were reversed.

Even though there are no ill effects being observed from the swapped
definitions (because IMAN_IP is RW1C and in legacy PCI case we come in
with it already set to 1 so it was clearing itself even though we were
setting IMAN_IE instead of IMAN_IP), we should still correct the values.

This patch should be backported to kernels as old as 2.6.36, that
contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't
re-enable IE constantly".

Signed-off-by: Dmitry Torokhov <dtor@xxxxxxxxxx>
Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Steven Rostedt <rostedt@xxxxxxxxxxx>
---
 drivers/usb/host/xhci.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 53df4e7..7c75bfe 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -206,8 +206,8 @@ struct xhci_op_regs {
 /* bits 12:31 are reserved (and should be preserved on writes). */
 
 /* IMAN - Interrupt Management Register */
-#define IMAN_IP		(1 << 1)
-#define IMAN_IE		(1 << 0)
+#define IMAN_IE		(1 << 1)
+#define IMAN_IP		(1 << 0)
 
 /* USBSTS - USB status - status bitmasks */
 /* HC not running - set to 1 when run/stop bit is cleared. */
-- 
1.7.10.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/