[RFC PATCHv2 arm: initial TI-Nspire support]
From: Daniel Tang
Date: Thu Apr 11 2013 - 07:52:08 EST
This is another updated patch for Linux on TI-Nspire support.
Apologies for previously posting updated patches as replies to the first thread. I'll send updated patches in new threads from now to avoid confusion.
Changes between http://archive.arm.linux.org.uk/lurker/message/20130408.113343.585af217.en.html and v2:
* Added new drivers to support the irqchip and timers on older models.
* Added new device trees to support the other models.
Signed-off-by: Daniel Tang <dt.tangr@xxxxxxxxx>
---
arch/arm/Kconfig | 2 +
arch/arm/Kconfig.debug | 16 ++
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/nspire-classic.dtsi | 68 ++++++
arch/arm/boot/dts/nspire-clp.dts | 45 ++++
arch/arm/boot/dts/nspire-cx.dts | 115 ++++++++++
arch/arm/boot/dts/nspire-tp.dts | 44 ++++
arch/arm/boot/dts/nspire.dtsi | 159 ++++++++++++++
arch/arm/include/debug/nspire.S | 28 +++
arch/arm/mach-nspire/Kconfig | 15 ++
arch/arm/mach-nspire/Makefile | 2 +
arch/arm/mach-nspire/Makefile.boot | 0
arch/arm/mach-nspire/clcd.c | 118 +++++++++++
arch/arm/mach-nspire/clcd.h | 14 ++
arch/arm/mach-nspire/mmio.h | 15 ++
arch/arm/mach-nspire/nspire.c | 142 +++++++++++++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/nspire-classic-timer.c | 216 +++++++++++++++++++
drivers/input/keyboard/Kconfig | 10 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/nspire-keypad.c | 316 ++++++++++++++++++++++++++++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-nspire-classic.c | 177 ++++++++++++++++
include/clocksource/nspire_classic_timer.h | 16 ++
include/linux/platform_data/nspire-keypad.h | 28 +++
26 files changed, 1553 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1cacda4..3f0cd8c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1081,6 +1081,8 @@ source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/mach-nspire/Kconfig"
+
source "arch/arm/plat-omap/Kconfig"
source "arch/arm/mach-omap1/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9b31f43..5da3a50 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -298,6 +298,20 @@ choice
Say Y here if you want kernel low-level debugging support
on MVEBU based platforms.
+ config DEBUG_NSPIRE_CLASSIC_UART
+ bool "Kernel low-level debugging via TI-NSPIRE 8250 UART"
+ depends on ARCH_NSPIRE
+ help
+ Say Y here if you want kernel low-level debugging support
+ on TI-NSPIRE classic models.
+
+ config DEBUG_NSPIRE_CX_UART
+ bool "Kernel low-level debugging via TI-NSPIRE PL011 UART"
+ depends on ARCH_NSPIRE
+ help
+ Say Y here if you want kernel low-level debugging support
+ on TI-NSPIRE CX models.
+
config DEBUG_OMAP2PLUS_UART
bool "Kernel low-level debugging messages via OMAP2PLUS UART"
depends on ARCH_OMAP2PLUS
@@ -591,6 +605,8 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6Q_UART
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
default "debug/mvebu.S" if DEBUG_MVEBU_UART
+ default "debug/nspire.S" if DEBUG_NSPIRE_CX_UART || \
+ DEBUG_NSPIRE_CLASSIC_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ee4605f..2580d2b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -165,6 +165,7 @@ machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
+machine-$(CONFIG_ARCH_NSPIRE) += nspire
machine-$(CONFIG_ARCH_OMAP1) += omap1
machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9c62558..21d161b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -114,6 +114,9 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx28-sps1.dtb \
imx28-tx28.dtb
dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
+dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
+ nspire-tp.dtb \
+ nspire-clp.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-beagle.dtb \
omap3-beagle-xm.dtb \
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi
new file mode 100644
index 0000000..56f5e39
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-classic.dtsi
@@ -0,0 +1,68 @@
+/*
+ * linux/arch/arm/boot/nspire-classic.dts
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/include/ "nspire.dtsi"
+
+&lcd {
+ lcd-type = "classic";
+};
+
+&fast_timer {
+ /* compatible = "nspire-classic-timer"; */
+ reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
+};
+
+&uart {
+ compatible = "ns16550";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <29491200>;
+ no-loopback-test;
+};
+
+&timer0 {
+ compatible = "nspire-classic-timer";
+ reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
+};
+
+&timer1 {
+ compatible = "nspire-classic-timer";
+ reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+};
+
+/ {
+ memory {
+ device_type = "memory";
+ reg = <0x10000000 0x2000000>; /* 32 MB */
+ };
+
+ /* Not really a fixed clock but we'll fix this later */
+ apb_pclk: apb_pclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ };
+
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ intc: interrupt-controller@DC000000 {
+ compatible = "nspire-classic-intc";
+ interrupt-controller;
+ reg = <0xDC000000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+ };
+ chosen {
+ bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0";
+ };
+};
diff --git a/arch/arm/boot/dts/nspire-clp.dts b/arch/arm/boot/dts/nspire-clp.dts
new file mode 100644
index 0000000..7f25f44
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-clp.dts
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/arm/boot/nspire-clp.dts
+ *
+ * Copyright (C) 2013 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+ keymap = <
+ 0x0000001c 0x0001001c 0x00020039
+ 0x0004002c 0x00050034 0x00060015
+ 0x0007000b 0x0008002d 0x01000033
+ 0x0101004e 0x01020011 0x01030004
+ 0x0104002f 0x01050003 0x01060016
+ 0x01070002 0x01080014 0x02000062
+ 0x0201000c 0x0202001f 0x02030007
+ 0x02040013 0x02050006 0x02060010
+ 0x02070005 0x02080019 0x03000027
+ 0x03010037 0x03020018 0x0303000a
+ 0x03040031 0x03050009 0x03060032
+ 0x03070008 0x03080026 0x04000028
+ 0x04010035 0x04020025 0x04040024
+ 0x04060017 0x04080023 0x05000028
+ 0x05020022 0x0503001b 0x05040021
+ 0x0505001a 0x05060012 0x0507006f
+ 0x05080020 0x0509002a 0x0601001c
+ 0x0602002e 0x06030068 0x06040030
+ 0x0605006d 0x0606001e 0x06070001
+ 0x0608002b 0x0609000f 0x07000067
+ 0x0702006a 0x0704006c 0x07060069
+ 0x0707000e 0x0708001d 0x070a000d
+ >;
+};
+
+/ {
+ model = "TI-NSPIRE Clickpad";
+ compatible = "arm,nspire-clp";
+};
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
new file mode 100644
index 0000000..890dd98
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-cx.dts
@@ -0,0 +1,115 @@
+/*
+ * linux/arch/arm/boot/nspire-cx.dts
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+
+/include/ "nspire.dtsi"
+
+&lcd {
+ lcd-type = "cx";
+};
+
+&fast_timer {
+ /* compatible = "arm,sp804", "arm,primecell"; */
+};
+
+&uart {
+ compatible = "arm,pl011", "arm,primecell";
+
+ clocks = <&uart_clk>, <&apb_pclk>;
+ clock-names = "uart_clk", "apb_pclk";
+};
+
+&timer0 {
+ compatible = "arm,sp804", "arm,primecell";
+};
+
+&timer1 {
+ compatible = "arm,sp804", "arm,primecell";
+};
+
+&keypad {
+ keymap = <
+ 0x0000001c 0x0001001c 0x00040039
+ 0x0005002c 0x00060015 0x0007000b
+ 0x0008000f 0x0100002d 0x01010011
+ 0x0102002f 0x01030004 0x01040016
+ 0x01050014 0x0106001f 0x01070002
+ 0x010a006a 0x02000013 0x02010010
+ 0x02020019 0x02030007 0x02040018
+ 0x02050031 0x02060032 0x02070005
+ 0x02080028 0x0209006c 0x03000026
+ 0x03010025 0x03020024 0x0303000a
+ 0x03040017 0x03050023 0x03060022
+ 0x03070008 0x03080035 0x03090069
+ 0x04000021 0x04010012 0x04020020
+ 0x0404002e 0x04050030 0x0406001e
+ 0x0407000d 0x04080037 0x04090067
+ 0x05010038 0x0502000c 0x0503001b
+ 0x05040034 0x0505001a 0x05060006
+ 0x05080027 0x0509000e 0x050a006f
+ 0x0600002b 0x0602004e 0x06030068
+ 0x06040003 0x0605006d 0x06060009
+ 0x06070001 0x0609000f 0x0708002a
+ 0x0709001d 0x070a0033 >;
+};
+
+/ {
+ model = "TI-NSPIRE CX";
+ compatible = "arm,nspire-cx";
+
+ memory {
+ device_type = "memory";
+ reg = <0x10000000 0x4000000>; /* 64 MB */
+ };
+
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+
+ /* Not really a fixed clock but we'll fix this later */
+ apb_pclk: apb_pclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33000000>;
+ };
+
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ intc: interrupt-controller@DC000000 {
+ compatible = "arm,pl190-vic";
+ interrupt-controller;
+ reg = <0xDC000000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ lcd: lcd@C0000000 {
+ lcd-type = "cx";
+ };
+
+ apb@90000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ i2c@90050000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x90050000 0x1000>;
+ interrupts = <20>;
+ };
+ };
+ };
+ chosen {
+ bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
+ };
+};
diff --git a/arch/arm/boot/dts/nspire-tp.dts b/arch/arm/boot/dts/nspire-tp.dts
new file mode 100644
index 0000000..485d0ff
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-tp.dts
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/boot/nspire-tp.dts
+ *
+ * Copyright (C) 2013 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+ keymap = <
+ 0x0000001c 0x0001001c 0x00040039
+ 0x0005002c 0x00060015 0x0007000b
+ 0x0008000f 0x0100002d 0x01010011
+ 0x0102002f 0x01030004 0x01040016
+ 0x01050014 0x0106001f 0x01070002
+ 0x010a006a 0x02000013 0x02010010
+ 0x02020019 0x02030007 0x02040018
+ 0x02050031 0x02060032 0x02070005
+ 0x02080028 0x0209006c 0x03000026
+ 0x03010025 0x03020024 0x0303000a
+ 0x03040017 0x03050023 0x03060022
+ 0x03070008 0x03080035 0x03090069
+ 0x04000021 0x04010012 0x04020020
+ 0x0404002e 0x04050030 0x0406001e
+ 0x0407000d 0x04080037 0x04090067
+ 0x05010038 0x0502000c 0x0503001b
+ 0x05040034 0x0505001a 0x05060006
+ 0x05080027 0x0509000e 0x050a006f
+ 0x0600002b 0x0602004e 0x06030068
+ 0x06040003 0x0605006d 0x06060009
+ 0x06070001 0x0609000f 0x0708002a
+ 0x0709001d 0x070a0033 >;
+};
+
+/ {
+ model = "TI-NSPIRE Touchpad";
+ compatible = "arm,nspire-tp";
+};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
new file mode 100644
index 0000000..31c9172
--- /dev/null
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -0,0 +1,159 @@
+/*
+ * linux/arch/arm/boot/nspire.dtsi
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&intc>;
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ bootrom: bootrom@00000000 {
+ reg = <0x00000000 0x80000>;
+ };
+
+ sram: sram@A4000000 {
+ device = "memory";
+ reg = <0xA4000000 0x20000>;
+ };
+
+ timer_clk: timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ spi: spi@A9000000 {
+ reg = <0xA9000000 0x1000>;
+ };
+
+ usb0: usb@B0000000 {
+ reg = <0xB0000000 0x1000>;
+ interrupts = <8>;
+ };
+
+ usb1: usb@B4000000 {
+ reg = <0xB4000000 0x1000>;
+ interrupts = <9>;
+ status = "disabled";
+ };
+
+ lcd: lcd@C0000000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0xC0000000 0x1000>;
+ interrupts = <21>;
+
+ clocks = <&apb_pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ adc: adc@C4000000 {
+ reg = <0xC4000000 0x1000>;
+ interrupts = <11>;
+ };
+
+ tdes: crypto@C8010000 {
+ reg = <0xC8010000 0x1000>;
+ };
+
+ sha256: crypto@CC000000 {
+ reg = <0xCC000000 0x1000>;
+ };
+
+ apb@90000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clock-ranges;
+ ranges;
+
+ gpio: gpio@90000000 {
+ reg = <0x90000000 0x1000>;
+ interrupts = <7>;
+ };
+
+ fast_timer: timer@90010000 {
+ reg = <0x90010000 0x1000>;
+ interrupts = <17>;
+ };
+
+ uart: serial@90020000 {
+ reg = <0x90020000 0x1000>;
+ interrupts = <1>;
+ };
+
+ timer0: timer@900C0000 {
+ reg = <0x900C0000 0x1000>;
+
+ clocks = <&timer_clk>;
+ clock-names = "timer_clk";
+ };
+
+ timer1: timer@900D0000 {
+ reg = <0x900D0000 0x1000>;
+ interrupts = <19>;
+
+ clocks = <&timer_clk>;
+ clock-names = "timer_clk";
+ };
+
+ watchdog: watchdog@90060000 {
+ compatible = "arm,amba-primecell";
+ reg = <0x90060000 0x1000>;
+ interrupts = <3>;
+ };
+
+ rtc: rtc@90090000 {
+ reg = <0x90090000 0x1000>;
+ interrupts = <4>;
+ };
+
+ misc: misc@900A0000 {
+ reg = <0x900A0000 0x1000>;
+ };
+
+ pwr: pwr@900B0000 {
+ reg = <0x900B0000 0x1000>;
+ interrupts = <15>;
+ };
+
+ keypad: input@900E0000 {
+ compatible = "nspire-keypad";
+ reg = <0x900E0000 0x1000>;
+ interrupts = <16>;
+
+ scan-interval = <1000>;
+ row-delay = <200>;
+
+ clocks = <&apb_pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ contrast: contrast@900F0000 {
+ reg = <0x900F0000 0x1000>;
+ };
+
+ led: led@90110000 {
+ reg = <0x90110000 0x1000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/include/debug/nspire.S b/arch/arm/include/debug/nspire.S
new file mode 100644
index 0000000..3a9729c
--- /dev/null
+++ b/arch/arm/include/debug/nspire.S
@@ -0,0 +1,28 @@
+/*
+ * linux/arch/arm/include/debug/nspire.S
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define NSPIRE_EARLY_UART_PHYS_BASE 0x90020000
+#define NSPIRE_EARLY_UART_VIRT_BASE 0xfee20000
+
+.macro addruart, rp, rv, tmp
+ ldr \rp, =(NSPIRE_EARLY_UART_PHYS_BASE) @ physical base address
+ ldr \rv, =(NSPIRE_EARLY_UART_VIRT_BASE) @ virtual base address
+.endm
+
+
+#ifdef CONFIG_DEBUG_NSPIRE_CX_UART
+#include <asm/hardware/debug-pl01x.S>
+#endif
+
+#ifdef CONFIG_DEBUG_NSPIRE_CLASSIC_UART
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
+#endif
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
new file mode 100644
index 0000000..a295b18
--- /dev/null
+++ b/arch/arm/mach-nspire/Kconfig
@@ -0,0 +1,15 @@
+config ARCH_NSPIRE
+ bool "TI-NSPIRE based"
+ depends on ARCH_MULTI_V4_V5
+ depends on MMU
+ select CPU_ARM926T
+ select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
+ select SPARSE_IRQ
+ select ARM_AMBA
+ select ARM_VIC
+ select ARM_TIMER_SP804
+ select USE_OF
+ select CLKSRC_OF
+ help
+ This enables support for systems using the TI-NSPIRE CPU
diff --git a/arch/arm/mach-nspire/Makefile b/arch/arm/mach-nspire/Makefile
new file mode 100644
index 0000000..1bec256
--- /dev/null
+++ b/arch/arm/mach-nspire/Makefile
@@ -0,0 +1,2 @@
+obj-y += nspire.o
+obj-y += clcd.o
diff --git a/arch/arm/mach-nspire/Makefile.boot b/arch/arm/mach-nspire/Makefile.boot
new file mode 100644
index 0000000..e69de29
diff --git a/arch/arm/mach-nspire/clcd.c b/arch/arm/mach-nspire/clcd.c
new file mode 100644
index 0000000..09f7dc7
--- /dev/null
+++ b/arch/arm/mach-nspire/clcd.c
@@ -0,0 +1,118 @@
+/*
+ * linux/arch/arm/mach-nspire/clcd.c
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/dma-mapping.h>
+
+static struct clcd_panel nspire_cx_lcd_panel = {
+ .mode = {
+ .name = "Color LCD",
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .pixclock = 1,
+ .hsync_len = 6,
+ .vsync_len = 1,
+ .right_margin = 50,
+ .left_margin = 38,
+ .lower_margin = 3,
+ .upper_margin = 17,
+ },
+ .width = 65, /* ~6.50 cm */
+ .height = 49, /* ~4.87 cm */
+ .tim2 = TIM2_IPC,
+ .cntl = (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
+ CNTL_LCDBPP16_565),
+ .bpp = 16,
+};
+
+static struct clcd_panel nspire_classic_lcd_panel = {
+ .mode = {
+ .name = "Grayscale LCD",
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .pixclock = 1,
+ .hsync_len = 6,
+ .vsync_len = 1,
+ .right_margin = 6,
+ .left_margin = 6,
+ },
+ .width = 71, /* 7.11cm */
+ .height = 53, /* 5.33cm */
+ .tim2 = 0x80007d0,
+ .cntl = CNTL_LCDBPP8 | CNTL_LCDMONO8,
+ .bpp = 8,
+ .grayscale = 1
+};
+
+int nspire_clcd_setup(struct clcd_fb *fb)
+{
+ struct clcd_panel *panel;
+ size_t panel_size;
+ const char *type;
+ dma_addr_t dma;
+ int err;
+
+ BUG_ON(!fb->dev->dev.of_node);
+
+ err = of_property_read_string(fb->dev->dev.of_node, "lcd-type", &type);
+ if (err) {
+ pr_err("CLCD: Could not find lcd-type property\n");
+ return err;
+ }
+
+ if (!strcmp(type, "cx")) {
+ panel = &nspire_cx_lcd_panel;
+ } else if (!strcmp(type, "classic")) {
+ panel = &nspire_classic_lcd_panel;
+ } else {
+ pr_err("CLCD: Unknown lcd-type %s\n", type);
+ return -EINVAL;
+ }
+
+ panel_size = ((panel->mode.xres * panel->mode.yres) * panel->bpp) / 8;
+ panel_size = ALIGN(panel_size, PAGE_SIZE);
+
+ fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
+ panel_size, &dma, GFP_KERNEL);
+
+ if (!fb->fb.screen_base) {
+ pr_err("CLCD: unable to map framebuffer\n");
+ return -ENOMEM;
+ }
+
+ fb->fb.fix.smem_start = dma;
+ fb->fb.fix.smem_len = panel_size;
+ fb->panel = panel;
+
+ return 0;
+}
+
+int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ return dma_mmap_writecombine(&fb->dev->dev, vma,
+ fb->fb.screen_base, fb->fb.fix.smem_start,
+ fb->fb.fix.smem_len);
+}
+
+void nspire_clcd_remove(struct clcd_fb *fb)
+{
+ dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+ fb->fb.screen_base, fb->fb.fix.smem_start);
+}
diff --git a/arch/arm/mach-nspire/clcd.h b/arch/arm/mach-nspire/clcd.h
new file mode 100644
index 0000000..7144399
--- /dev/null
+++ b/arch/arm/mach-nspire/clcd.h
@@ -0,0 +1,14 @@
+/*
+ * linux/arch/arm/mach-nspire/clcd.h
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+int nspire_clcd_setup(struct clcd_fb *fb);
+int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma);
+void nspire_clcd_remove(struct clcd_fb *fb);
diff --git a/arch/arm/mach-nspire/mmio.h b/arch/arm/mach-nspire/mmio.h
new file mode 100644
index 0000000..f0a1fa5
--- /dev/null
+++ b/arch/arm/mach-nspire/mmio.h
@@ -0,0 +1,15 @@
+/*
+ * linux/arch/arm/mach-nspire/mmio.h
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define NSPIRE_EARLY_UART_PHYS_BASE 0x90020000
+#define NSPIRE_EARLY_UART_VIRT_BASE 0xfee20000
+
+#define NSPIRE_LCD_PHYS_BASE 0xC0000000
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
new file mode 100644
index 0000000..bb1c8b3
--- /dev/null
+++ b/arch/arm/mach-nspire/nspire.c
@@ -0,0 +1,142 @@
+/*
+ * linux/arch/arm/mach-nspire/nspire.c
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/init.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-vic.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+
+#include <clocksource/nspire_classic_timer.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <asm/hardware/timer-sp.h>
+
+#include "mmio.h"
+#include "clcd.h"
+
+static const char *nspire_dt_match[] __initconst = {
+ "arm,nspire",
+ "arm,nspire-cx",
+ "arm,nspire-tp",
+ "arm,nspire-clp",
+ NULL,
+};
+
+static struct map_desc nspire_io_desc[] __initdata = {
+ {
+ .virtual = NSPIRE_EARLY_UART_VIRT_BASE,
+ .pfn = __phys_to_pfn(NSPIRE_EARLY_UART_PHYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }
+};
+
+#define TIMER_NAME_MAXLEN 32
+static void __init nspire_add_sp804_timers(void)
+{
+ struct device_node *of_timer;
+ int clockevents_found = 0;
+
+ for_each_compatible_node(of_timer, NULL, "arm,sp804") {
+ struct resource res;
+ void __iomem *base;
+ char *name;
+ struct clk *clk;
+ int irq;
+
+ clk = of_clk_get_by_name(of_timer, NULL);
+ if (WARN_ON(!clk))
+ continue;
+
+ name = kzalloc(TIMER_NAME_MAXLEN, GFP_ATOMIC);
+ if (!name)
+ break;
+
+ base = of_iomap(of_timer, 0);
+ if (WARN_ON(!base)) {
+ kfree(name);
+ continue;
+ }
+
+ of_address_to_resource(of_timer, 0, &res);
+ scnprintf(name, TIMER_NAME_MAXLEN, "%llx.%s",
+ (unsigned long long)res.start,
+ of_timer->name);
+
+ clk_register_clkdev(clk, name, "sp804");
+ if (!clockevents_found) {
+ irq = irq_of_parse_and_map(of_timer, 0);
+ if (irq) {
+ sp804_clockevents_init(base, irq, name);
+ clockevents_found = 1;
+ continue;
+ }
+ }
+
+ sp804_clocksource_init(base, name);
+ }
+}
+
+
+static void __init nspire_init_timer(void)
+{
+ of_clk_init(NULL);
+ nspire_classic_timer_init();
+ nspire_add_sp804_timers();
+}
+
+static void __init nspire_map_io(void)
+{
+ iotable_init(nspire_io_desc, ARRAY_SIZE(nspire_io_desc));
+}
+
+static struct clcd_board nspire_clcd_data = {
+ .name = "LCD",
+ .check = clcdfb_check,
+ .decode = clcdfb_decode,
+ .setup = nspire_clcd_setup,
+ .mmap = nspire_clcd_mmap,
+ .remove = nspire_clcd_remove,
+};
+
+
+static struct of_dev_auxdata nspire_auxdata[] __initdata = {
+ OF_DEV_AUXDATA("arm,pl111", NSPIRE_LCD_PHYS_BASE,
+ NULL, &nspire_clcd_data),
+ { }
+};
+
+static void __init nspire_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ nspire_auxdata, NULL);
+}
+
+static void nspire_restart(char mode, const char *cmd)
+{
+}
+
+DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
+ .map_io = nspire_map_io,
+ .init_irq = irqchip_init,
+ .init_time = nspire_init_timer,
+ .init_machine = nspire_init,
+ .dt_compat = nspire_dt_match,
+ .restart = nspire_restart,
+MACHINE_END
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 4d8283a..0a8e6b7 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
+obj-$(CONFIG_ARCH_NSPIRE) += nspire-classic-timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
diff --git a/drivers/clocksource/nspire-classic-timer.c b/drivers/clocksource/nspire-classic-timer.c
new file mode 100644
index 0000000..b5aa32e
--- /dev/null
+++ b/drivers/clocksource/nspire-classic-timer.c
@@ -0,0 +1,216 @@
+/*
+ * linux/drivers/clocksource/nspire-classic-timer.c
+ *
+ * Copyright (C) 2013 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#define DT_COMPAT "nspire-classic-timer"
+
+#define IO_CURRENT_VAL 0x00
+#define IO_DIVIDER 0x04
+#define IO_CONTROL 0x08
+
+#define IO_TIMER1 0x00
+#define IO_TIMER2 0x0C
+
+#define IO_MATCH1 0x18
+#define IO_MATCH2 0x1C
+#define IO_MATCH3 0x20
+#define IO_MATCH4 0x24
+#define IO_MATCH5 0x28
+#define IO_MATCH6 0x2C
+
+#define IO_INTR_STS 0x00
+#define IO_INTR_ACK 0x00
+#define IO_INTR_MSK 0x04
+
+#define CNTL_STOP_TIMER (1<<4)
+#define CNTL_RUN_TIMER (0<<4)
+
+#define CNTL_INC (1<<3)
+#define CNTL_DEC (0<<3)
+
+#define CNTL_TOZERO 0
+#define CNTL_MATCH1 1
+#define CNTL_MATCH2 2
+#define CNTL_MATCH3 3
+#define CNTL_MATCH4 4
+#define CNTL_MATCH5 5
+#define CNTL_MATCH6 6
+#define CNTL_FOREVER 7
+
+struct nspire_timer {
+ void __iomem *base;
+ void __iomem *timer1, *timer2;
+ void __iomem *interrupt_regs;
+
+ int irqnr;
+
+ struct clk *clk;
+ struct clock_event_device clkevt;
+ struct irqaction clkevt_irq;
+
+ char clocksource_name[64];
+ char clockevent_name[64];
+};
+
+static int nspire_timer_set_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ unsigned long flags;
+ struct nspire_timer *timer = container_of(dev,
+ struct nspire_timer,
+ clkevt);
+
+ local_irq_save(flags);
+
+ writel(delta, timer->timer1 + IO_CURRENT_VAL);
+ writel(CNTL_RUN_TIMER | CNTL_DEC | CNTL_MATCH1,
+ timer->timer1 + IO_CONTROL);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+static void nspire_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ evt->mode = mode;
+}
+
+static irqreturn_t nspire_timer_interrupt(int irq, void *dev_id)
+{
+ struct nspire_timer *timer = dev_id;
+
+ writel((1<<0), timer->interrupt_regs + IO_INTR_ACK);
+ writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
+
+ if (timer->clkevt.event_handler)
+ timer->clkevt.event_handler(&timer->clkevt);
+
+ return IRQ_HANDLED;
+}
+
+static int __init nspire_timer_add(struct device_node *node)
+{
+ struct nspire_timer *timer;
+ struct resource res;
+ int ret;
+
+ timer = kzalloc(sizeof(*timer), GFP_ATOMIC);
+ if (!timer)
+ return -ENOMEM;
+
+ timer->base = of_iomap(node, 0);
+ if (!timer->base) {
+ ret = -EINVAL;
+ goto error_free;
+ }
+ timer->timer1 = timer->base + IO_TIMER1;
+ timer->timer2 = timer->base + IO_TIMER2;
+
+ timer->clk = of_clk_get(node, 0);
+ if (!timer->clk) {
+ ret = -EINVAL;
+ pr_err("Timer clock not found!\n");
+ goto error_unmap;
+ }
+
+ timer->interrupt_regs = of_iomap(node, 1);
+ timer->irqnr = irq_of_parse_and_map(node, 0);
+
+ of_address_to_resource(node, 0, &res);
+ scnprintf(timer->clocksource_name, sizeof(timer->clocksource_name),
+ "%llx.%s_clocksource",
+ (unsigned long long)res.start, node->name);
+
+ scnprintf(timer->clockevent_name, sizeof(timer->clockevent_name),
+ "%llx.%s_clockevent",
+ (unsigned long long)res.start, node->name);
+
+ if (timer->interrupt_regs && timer->irqnr) {
+ timer->clkevt.name = timer->clockevent_name;
+ timer->clkevt.set_next_event = nspire_timer_set_event;
+ timer->clkevt.set_mode = nspire_timer_set_mode;
+ timer->clkevt.rating = 200;
+ timer->clkevt.shift = 32;
+ timer->clkevt.cpumask = cpu_all_mask;
+ timer->clkevt.features =
+ CLOCK_EVT_FEAT_ONESHOT;
+
+ writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
+ writel(0, timer->timer1 + IO_DIVIDER);
+
+ /* Mask out interrupts except the one we're using */
+ writel((1<<0), timer->interrupt_regs + IO_INTR_MSK);
+ writel(0x3F, timer->interrupt_regs + IO_INTR_ACK);
+
+ /* Interrupt to occur when timer value matches 0 */
+ writel(0, timer->base + IO_MATCH1);
+
+ timer->clkevt_irq.name = timer->clockevent_name;
+ timer->clkevt_irq.handler = nspire_timer_interrupt;
+ timer->clkevt_irq.dev_id = timer;
+ timer->clkevt_irq.flags =
+ IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL;
+
+ setup_irq(timer->irqnr, &timer->clkevt_irq);
+
+ clockevents_config_and_register(&timer->clkevt,
+ clk_get_rate(timer->clk), 0x0001, 0xfffe);
+ pr_info("Added %s as clockevent\n", timer->clockevent_name);
+ }
+
+ writel(CNTL_RUN_TIMER | CNTL_FOREVER | CNTL_INC,
+ timer->timer2 + IO_CONTROL);
+
+ clocksource_mmio_init(timer->timer2 + IO_CURRENT_VAL,
+ timer->clocksource_name,
+ clk_get_rate(timer->clk),
+ 200, 16,
+ clocksource_mmio_readw_up);
+
+ pr_info("Added %s as clocksource\n", timer->clocksource_name);
+
+ return 0;
+error_unmap:
+ iounmap(timer->base);
+error_free:
+ kfree(timer);
+ return ret;
+}
+
+bool timer_init;
+
+void __init nspire_classic_timer_init(void)
+{
+ struct device_node *node;
+
+ if (timer_init)
+ return;
+
+ for_each_compatible_node(node, NULL, DT_COMPAT) {
+ nspire_timer_add(node);
+ }
+
+ timer_init = 1;
+}
+
+CLOCKSOURCE_OF_DECLARE(nspire_classic_timer,
+ DT_COMPAT, nspire_classic_timer_init)
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index ac05006..677adba 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -418,6 +418,16 @@ config KEYBOARD_NOMADIK
To compile this driver as a module, choose M here: the
module will be called nmk-ske-keypad.
+config KEYBOARD_NSPIRE
+ tristate "TI-NSPIRE builtin keyboard"
+ depends on ARCH_NSPIRE
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use the builtin keypad on the TI-NSPIRE.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nspire-keypad.
+
config KEYBOARD_TEGRA
tristate "NVIDIA Tegra internal matrix keyboard controller support"
depends on ARCH_TEGRA && OF
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 49b1645..89d997b 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o
obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o
+obj-$(CONFIG_KEYBOARD_NSPIRE) += nspire-keypad.o
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
obj-$(CONFIG_KEYBOARD_OMAP4) += omap4-keypad.o
obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o
diff --git a/drivers/input/keyboard/nspire-keypad.c b/drivers/input/keyboard/nspire-keypad.c
new file mode 100644
index 0000000..581dea5
--- /dev/null
+++ b/drivers/input/keyboard/nspire-keypad.c
@@ -0,0 +1,316 @@
+/*
+ * linux/drivers/input/keyboard/nspire-keypad.c
+ *
+ * Copyright (C) 2013 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/input/matrix_keypad.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <linux/platform_data/nspire-keypad.h>
+
+#define KEYPAD_SCAN_MODE 0x00
+#define KEYPAD_CNTL 0x04
+#define KEYPAD_INT 0x08
+#define KEYPAD_INTMSK 0x0C
+
+#define KEYPAD_DATA 0x10
+#define KEYPAD_GPIO 0x30
+
+#define KEYPAD_UNKNOWN_INT 0x40
+#define KEYPAD_UNKNOWN_INT_STS 0x44
+
+
+struct nspire_keypad {
+ spinlock_t lock;
+
+ void __iomem *reg_base;
+ int irq;
+ u32 int_mask;
+
+ struct input_dev *input;
+ struct clk *clk;
+
+ struct nspire_keypad_data options;
+ int row_shift;
+};
+
+static inline void nspire_report_state(struct nspire_keypad *keypad,
+ int row, int col, unsigned int state)
+{
+ int code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+ unsigned short *keymap = keypad->input->keycode;
+
+ state = keypad->options.active_low ? !state : !!state;
+ input_report_key(keypad->input, keymap[code], state);
+}
+
+static irqreturn_t nspire_keypad_irq(int irq, void *dev_id)
+{
+ struct nspire_keypad *keypad = dev_id;
+ u32 int_sts;
+ u16 state[8];
+ int row, col;
+
+ int_sts = readl(keypad->reg_base + KEYPAD_INT) & keypad->int_mask;
+
+ if (!int_sts)
+ return IRQ_NONE;
+
+ spin_lock(&keypad->lock);
+
+ memcpy_fromio(state, keypad->reg_base + KEYPAD_DATA, sizeof(state));
+
+ for (row = 0; row < KEYPAD_BITMASK_ROWS; row++) {
+ u16 bits = state[row];
+ for (col = 0; col < KEYPAD_BITMASK_COLS; col++)
+ nspire_report_state(keypad, row, col, bits & (1<<col));
+ }
+ input_sync(keypad->input);
+ writel(0x3, keypad->reg_base + KEYPAD_INT);
+
+ spin_unlock(&keypad->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int nspire_keypad_chip_init(struct nspire_keypad *keypad)
+{
+ unsigned long val = 0, cycles_per_us, delay_cycles, row_delay_cycles;
+
+ cycles_per_us = (clk_get_rate(keypad->clk) / 1000000);
+ if (cycles_per_us == 0)
+ cycles_per_us = 1;
+
+ delay_cycles = cycles_per_us * keypad->options.scan_interval;
+ WARN_ON(delay_cycles >= (1<<16)); /* Overflow */
+ delay_cycles &= 0xffff;
+
+ row_delay_cycles = cycles_per_us * keypad->options.row_delay;
+ WARN_ON(row_delay_cycles >= (1<<14)); /* Overflow */
+ row_delay_cycles &= 0x3fff;
+
+
+ val |= (3<<0); /* Set scan mode to 3 (continuous scan) */
+ val |= (row_delay_cycles<<2); /* Delay between scanning each row */
+ val |= (delay_cycles<<16); /* Delay between scans */
+ writel(val, keypad->reg_base + KEYPAD_SCAN_MODE);
+
+ val = (KEYPAD_BITMASK_ROWS & 0xff) | (KEYPAD_BITMASK_COLS & 0xff)<<8;
+ writel(val, keypad->reg_base + KEYPAD_CNTL);
+
+ /* Enable interrupts */
+ keypad->int_mask = (1<<1);
+ writel(keypad->int_mask, keypad->reg_base + 0xc);
+
+ /* Disable GPIO interrupts to prevent hanging on touchpad */
+ /* Possibly used to detect touchpad events */
+ writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT);
+ /* Acknowledge existing interrupts */
+ writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS);
+
+ return 0;
+}
+
+static int nspire_keypad_probe(struct platform_device *pdev)
+{
+ const struct nspire_keypad_data *plat = pdev->dev.platform_data;
+ const struct device_node *of_node = pdev->dev.of_node;
+ struct nspire_keypad *keypad;
+ struct input_dev *input;
+ struct resource *res;
+ struct clk *clk;
+ int irq, error;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get keypad irq\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "missing platform resources\n");
+ return -EINVAL;
+ }
+
+ clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "unable to get clock\n");
+ return -EINVAL;
+ }
+
+ clk_prepare(clk);
+ error = clk_enable(clk);
+ if (error)
+ goto err_put_clk;
+
+ keypad = kzalloc(sizeof(struct nspire_keypad), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!keypad || !input) {
+ dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ if (plat) {
+ memcpy(&keypad->options, plat, sizeof(*plat));
+ } else {
+ /* Load values from device tree */
+
+ error = of_property_read_u32(of_node, "scan-interval",
+ &keypad->options.scan_interval);
+ if (error) {
+ dev_err(&pdev->dev, "failed to get scan-interval\n");
+ goto err_free_mem;
+ }
+
+ error = of_property_read_u32(of_node, "row-delay",
+ &keypad->options.row_delay);
+ if (error) {
+ dev_err(&pdev->dev, "failed to get row-delay\n");
+ goto err_free_mem;
+ }
+
+ keypad->options.active_low = of_property_read_bool(of_node,
+ "active-low");
+
+ keypad->options.keymap = NULL;
+ }
+
+ keypad->row_shift = get_count_order(KEYPAD_BITMASK_COLS);
+ keypad->irq = irq;
+ keypad->clk = clk;
+ keypad->input = input;
+ spin_lock_init(&keypad->lock);
+
+ if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+ dev_err(&pdev->dev, "failed to request I/O memory\n");
+ error = -EBUSY;
+ goto err_free_mem;
+ }
+
+ keypad->reg_base = ioremap(res->start, resource_size(res));
+ if (!keypad->reg_base) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ error = -ENXIO;
+ goto err_free_mem_region;
+ }
+
+ input->id.bustype = BUS_HOST;
+ input->name = "nspire-keypad";
+ input->dev.parent = &pdev->dev;
+
+ set_bit(EV_KEY, input->evbit);
+ set_bit(EV_REP, input->evbit);
+
+ error = matrix_keypad_build_keymap(keypad->options.keymap, "keymap",
+ KEYPAD_BITMASK_ROWS, KEYPAD_BITMASK_COLS, NULL, input);
+ if (error) {
+ dev_err(&pdev->dev, "building keymap failed\n");
+ goto err_iounmap;
+ }
+
+ error = nspire_keypad_chip_init(keypad);
+ if (error) {
+ dev_err(&pdev->dev, "unable to init keypad hardware\n");
+ goto err_iounmap;
+ }
+
+ error = request_irq(keypad->irq, nspire_keypad_irq, 0,
+ "nspire_keypad", keypad);
+ if (error) {
+ dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq);
+ goto err_iounmap;
+ }
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(&pdev->dev,
+ "unable to register input device: %d\n", error);
+ goto err_free_irq;
+ }
+
+ platform_set_drvdata(pdev, keypad);
+
+ dev_info(&pdev->dev, "TI-NSPIRE keypad at %#08x ("
+ "scan_interval=%uus,row_delay=%uus"
+ "%s)\n", res->start,
+ keypad->options.row_delay,
+ keypad->options.scan_interval,
+ keypad->options.active_low ? ",active_low" : "");
+
+ return 0;
+
+err_free_irq:
+ free_irq(keypad->irq, keypad);
+err_iounmap:
+ iounmap(keypad->reg_base);
+err_free_mem_region:
+ release_mem_region(res->start, resource_size(res));
+err_free_mem:
+ input_free_device(input);
+ kfree(keypad);
+
+ clk_disable(clk);
+err_put_clk:
+ clk_unprepare(clk);
+ clk_put(clk);
+ return error;
+}
+
+static int nspire_keypad_remove(struct platform_device *pdev)
+{
+ struct nspire_keypad *keypad = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ free_irq(keypad->irq, keypad);
+
+ input_unregister_device(keypad->input);
+
+ iounmap(keypad->reg_base);
+ release_mem_region(res->start, resource_size(res));
+ kfree(keypad);
+
+ clk_disable(keypad->clk);
+ clk_unprepare(keypad->clk);
+ clk_put(keypad->clk);
+
+ return 0;
+}
+#ifdef CONFIG_OF
+static const struct of_device_id nspire_keypad_dt_match[] = {
+ { .compatible = "nspire-keypad" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, nspire_keypad_dt_match);
+#endif
+
+static struct platform_driver nspire_keypad_driver = {
+ .driver = {
+ .name = "nspire-keypad",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(nspire_keypad_dt_match),
+ },
+ .remove = nspire_keypad_remove,
+ .probe = nspire_keypad_probe
+};
+
+module_platform_driver(nspire_keypad_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("TI-NSPIRE Keypad Driver");
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 98e3b87..9e7f5f5 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
obj-$(CONFIG_ARM_GIC) += irq-gic.o
obj-$(CONFIG_ARM_VIC) += irq-vic.o
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
+obj-$(CONFIG_ARCH_NSPIRE) += irq-nspire-classic.o
diff --git a/drivers/irqchip/irq-nspire-classic.c b/drivers/irqchip/irq-nspire-classic.c
new file mode 100644
index 0000000..9e6413a
--- /dev/null
+++ b/drivers/irqchip/irq-nspire-classic.c
@@ -0,0 +1,177 @@
+/*
+ * linux/drivers/irqchip/irq-nspire-classic.c
+ *
+ * Copyright (C) 2013 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/mach/irq.h>
+#include <asm/exception.h>
+
+#include "irqchip.h"
+
+#define IO_STATUS 0x000
+#define IO_RAW_STATUS 0x004
+#define IO_ENABLE 0x008
+#define IO_DISABLE 0x00C
+#define IO_CURRENT 0x020
+#define IO_RESET 0x028
+#define IO_MAX_PRIOTY 0x02C
+
+#define IO_IRQ_BASE 0x000
+#define IO_FIQ_BASE 0x100
+
+#define IO_INVERT_SEL 0x200
+#define IO_STICKY_SEL 0x204
+#define IO_PRIORITY_SEL 0x300
+
+#define MAX_INTRS 32
+#define FIQ_START MAX_INTRS
+
+
+static void __iomem *irq_io_base;
+static struct irq_domain *nspire_irq_domain;
+
+static void nspire_irq_ack(struct irq_data *irqd)
+{
+ void __iomem *base = irq_io_base;
+
+ if (irqd->hwirq < FIQ_START)
+ base += IO_IRQ_BASE;
+ else
+ base += IO_FIQ_BASE;
+
+ readl(base + IO_RESET);
+}
+
+static void nspire_irq_unmask(struct irq_data *irqd)
+{
+ void __iomem *base = irq_io_base;
+ int irqnr = irqd->hwirq;
+
+ if (irqnr < FIQ_START) {
+ base += IO_IRQ_BASE;
+ } else {
+ irqnr -= MAX_INTRS;
+ base += IO_FIQ_BASE;
+ }
+
+ writel((1<<irqnr), base + IO_ENABLE);
+}
+
+static void nspire_irq_mask(struct irq_data *irqd)
+{
+ void __iomem *base = irq_io_base;
+ int irqnr = irqd->hwirq;
+
+ if (irqnr < FIQ_START) {
+ base += IO_IRQ_BASE;
+ } else {
+ irqnr -= FIQ_START;
+ base += IO_FIQ_BASE;
+ }
+
+ writel((1<<irqnr), base + IO_DISABLE);
+}
+
+static struct irq_chip nspire_irq_chip = {
+ .name = "nspire_irq",
+ .irq_ack = nspire_irq_ack,
+ .irq_mask = nspire_irq_mask,
+ .irq_unmask = nspire_irq_unmask,
+};
+
+
+static int nspire_irq_map(struct irq_domain *dom, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(virq, &nspire_irq_chip, handle_level_irq);
+ set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
+
+ return 0;
+}
+
+static struct irq_domain_ops nspire_irq_ops = {
+ .map = nspire_irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static void init_base(void __iomem *base)
+{
+ /* Disable all interrupts */
+ writel(~0, base + IO_DISABLE);
+
+ /* Accept interrupts of all priorities */
+ writel(0xF, base + IO_MAX_PRIOTY);
+
+ /* Reset existing interrupts */
+ readl(base + IO_RESET);
+}
+
+static int process_base(void __iomem *base, struct pt_regs *regs)
+{
+ int irqnr;
+
+
+ if (!readl(base + IO_STATUS))
+ return 0;
+
+ irqnr = readl(base + IO_CURRENT);
+ irqnr = irq_find_mapping(nspire_irq_domain, irqnr);
+ handle_IRQ(irqnr, regs);
+
+ return 1;
+}
+
+asmlinkage void __exception_irq_entry nspire_handle_irq(struct pt_regs *regs)
+{
+ while (process_base(irq_io_base + IO_FIQ_BASE, regs))
+ ;
+ while (process_base(irq_io_base + IO_IRQ_BASE, regs))
+ ;
+}
+
+static int __init nspire_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ if (WARN_ON(irq_io_base))
+ return -EBUSY;
+
+ irq_io_base = of_iomap(node, 0);
+ BUG_ON(!irq_io_base);
+
+ /* Do not invert interrupt status bits */
+ writel(~0, irq_io_base + IO_INVERT_SEL);
+
+ /* Disable sticky interrupts */
+ writel(0, irq_io_base + IO_STICKY_SEL);
+
+ /* We don't use IRQ priorities. Set each IRQ to highest priority. */
+ memset_io(irq_io_base + IO_PRIORITY_SEL, 0, MAX_INTRS * sizeof(u32));
+
+ /* Init IRQ and FIQ */
+ init_base(irq_io_base + IO_IRQ_BASE);
+ init_base(irq_io_base + IO_FIQ_BASE);
+
+ nspire_irq_domain = irq_domain_add_linear(node, MAX_INTRS,
+ &nspire_irq_ops, NULL);
+
+ BUG_ON(!nspire_irq_domain);
+
+ set_handle_irq(nspire_handle_irq);
+
+ pr_info("TI-NSPIRE classic IRQ controller\n");
+ return 0;
+}
+
+IRQCHIP_DECLARE(nspire_classic_irq, "nspire-classic-intc", nspire_of_init);
diff --git a/include/clocksource/nspire_classic_timer.h b/include/clocksource/nspire_classic_timer.h
new file mode 100644
index 0000000..39236f1
--- /dev/null
+++ b/include/clocksource/nspire_classic_timer.h
@@ -0,0 +1,16 @@
+/*
+ * linux/include/clocksource/nspire_classic_timer.h
+ *
+ * Copyright (C) 2013 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __CLKSOURCE_NSPIRE_CLASSIC_TIMER_H
+#define __CLKSOURCE_NSPIRE_CLASSIC_TIMER_H
+
+void __init nspire_classic_timer_init(void);
+
+#endif
diff --git a/include/linux/platform_data/nspire-keypad.h b/include/linux/platform_data/nspire-keypad.h
new file mode 100644
index 0000000..03deb64
--- /dev/null
+++ b/include/linux/platform_data/nspire-keypad.h
@@ -0,0 +1,28 @@
+/*
+ * linux/include/linux/platform_data/nspire-keypad.h
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _LINUX_NSPIRE_KEYPAD_H
+#define _LINUX_NSPIRE_KEYPAD_H
+
+#define KEYPAD_BITMASK_COLS 11
+#define KEYPAD_BITMASK_ROWS 8
+
+struct nspire_keypad_data {
+ struct matrix_keymap_data *keymap;
+
+ /* Maximum delay estimated assuming 33MHz APB */
+ u32 scan_interval; /* In microseconds (~2000us max) */
+ u32 row_delay; /* In microseconds (~500us max) */
+
+ bool active_low;
+};
+
+#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/