[PATCH 17/30] pwm: samsung: repair the worst MMIO abuses

From: Arnd Bergmann
Date: Wed Apr 10 2013 - 20:13:52 EST


The Samsung PWM driver uses "magic" pointers that are mapped
at boot time to point its MMIO registers. This fails horribly
with a multiplatform kernel, which can not rely on platform
specific header files to contain the right values, aside from
this being a really bad idea in general.

This changes the driver to at least pass an __iomem token
around in the device structure to dereference that. Fixing
the platform code is much harder, so we'll leave that
until we have a DT binding for pwm-samsung, which may require
other changes in this area. Since we are already touching
every MMIO accessor in this driver, let's also use the
proper readl_relaxed variant rather than __raw_readl.

Tomasz Figa has a set of patches to clean this up in a proper
way, but that might be too late for 3.10.

Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Cc: Tomasz Figa <t.figa@xxxxxxxxxxx>
Cc: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
---
drivers/pwm/pwm-samsung.c | 60 +++++++++++++++++++++++++++++++++--------------
1 file changed, 42 insertions(+), 18 deletions(-)

diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
index 5207e6c..9d7234d 100644
--- a/drivers/pwm/pwm-samsung.c
+++ b/drivers/pwm/pwm-samsung.c
@@ -22,9 +22,25 @@
#include <linux/io.h>
#include <linux/pwm.h>

-#include <mach/map.h>
+#ifndef CONFIG_ARCH_MULTIPLATFORM
+/*
+ * This is gross: the platform maps the timer at a fixed
+ * virtual address and expects us to use that address
+ * rather than a proper resource. This should get done properly
+ * when we get a DT binding for this driver.
+ */
+#include <plat/map-base.h>
+static inline void dummy(void)
+{
+ BUILD_BUG_ON(S3C_VA_TIMER != IOMEM(0xf6300000));
+}
+#else
+#define S3C_VA_TIMER IOMEM(0xf6300000);
+#endif

-#include <plat/regs-timer.h>
+#define S3C2410_TCON 8
+#define S3C2410_TCNTB(tmr) (0x0c + (tmr)*0x0c + 0x00)
+#define S3C2410_TCMPB(tmr) (0x0c + (tmr)*0x0c + 0x04)

struct s3c_chip {
struct platform_device *pdev;
@@ -38,6 +54,7 @@ struct s3c_chip {

unsigned char tcon_base;
unsigned char pwm_id;
+ void __iomem *base;
struct pwm_chip chip;
};

@@ -65,9 +82,9 @@ static int s3c_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)

local_irq_save(flags);

- tcon = __raw_readl(S3C2410_TCON);
+ tcon = readl_relaxed(s3c->base + S3C2410_TCON);
tcon |= pwm_tcon_start(s3c);
- __raw_writel(tcon, S3C2410_TCON);
+ writel_relaxed(tcon, s3c->base + S3C2410_TCON);

local_irq_restore(flags);

@@ -82,9 +99,9 @@ static void s3c_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)

local_irq_save(flags);

- tcon = __raw_readl(S3C2410_TCON);
+ tcon = readl_relaxed(s3c->base + S3C2410_TCON);
tcon &= ~pwm_tcon_start(s3c);
- __raw_writel(tcon, S3C2410_TCON);
+ writel_relaxed(tcon, s3c->base + S3C2410_TCON);

local_irq_restore(flags);
}
@@ -133,8 +150,8 @@ static int s3c_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
/* The TCMP and TCNT can be read without a lock, they're not
* shared between the timers. */

- tcmp = __raw_readl(S3C2410_TCMPB(s3c->pwm_id));
- tcnt = __raw_readl(S3C2410_TCNTB(s3c->pwm_id));
+ tcmp = readl_relaxed(s3c->base + S3C2410_TCMPB(s3c->pwm_id));
+ tcnt = readl_relaxed(s3c->base + S3C2410_TCNTB(s3c->pwm_id));

period = NS_IN_HZ / period_ns;

@@ -177,16 +194,16 @@ static int s3c_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,

local_irq_save(flags);

- __raw_writel(tcmp, S3C2410_TCMPB(s3c->pwm_id));
- __raw_writel(tcnt, S3C2410_TCNTB(s3c->pwm_id));
+ writel_relaxed(tcmp, s3c->base + S3C2410_TCMPB(s3c->pwm_id));
+ writel_relaxed(tcnt, s3c->base + S3C2410_TCNTB(s3c->pwm_id));

- tcon = __raw_readl(S3C2410_TCON);
+ tcon = readl_relaxed(s3c->base + S3C2410_TCON);
tcon |= pwm_tcon_manulupdate(s3c);
tcon |= pwm_tcon_autoreload(s3c);
- __raw_writel(tcon, S3C2410_TCON);
+ writel_relaxed(tcon, s3c->base + S3C2410_TCON);

tcon &= ~pwm_tcon_manulupdate(s3c);
- __raw_writel(tcon, S3C2410_TCON);
+ writel_relaxed(tcon, s3c->base + S3C2410_TCON);

local_irq_restore(flags);

@@ -207,6 +224,7 @@ static int s3c_pwm_probe(struct platform_device *pdev)
unsigned long flags;
unsigned long tcon;
unsigned int id = pdev->id;
+ struct resource *res;
int ret;

if (id == 4) {
@@ -220,6 +238,12 @@ static int s3c_pwm_probe(struct platform_device *pdev)
return -ENOMEM;
}

+ /* try to get a proper base address, fall back to S3C_VA_TIMER */
+ s3c->base = S3C_VA_TIMER;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res)
+ s3c->base = devm_ioremap(dev, res->start, resource_size(res));
+
/* calculate base of control bits in TCON */
s3c->tcon_base = id == 0 ? 0 : (id * 4) + 4;
s3c->pwm_id = id;
@@ -245,9 +269,9 @@ static int s3c_pwm_probe(struct platform_device *pdev)

local_irq_save(flags);

- tcon = __raw_readl(S3C2410_TCON);
+ tcon = readl_relaxed(s3c->base + S3C2410_TCON);
tcon |= pwm_tcon_invert(s3c);
- __raw_writel(tcon, S3C2410_TCON);
+ writel_relaxed(tcon, s3c->base + S3C2410_TCON);

local_irq_restore(flags);

@@ -258,7 +282,7 @@ static int s3c_pwm_probe(struct platform_device *pdev)
}

pwm_dbg(s3c, "config bits %02x\n",
- (__raw_readl(S3C2410_TCON) >> s3c->tcon_base) & 0x0f);
+ (readl_relaxed(s3c->base + S3C2410_TCON) >> s3c->tcon_base) & 0x0f);

dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
clk_get_rate(s3c->clk),
@@ -310,9 +334,9 @@ static int s3c_pwm_resume(struct platform_device *pdev)
unsigned long tcon;

/* Restore invertion */
- tcon = __raw_readl(S3C2410_TCON);
+ tcon = readl_relaxed(s3c->base + S3C2410_TCON);
tcon |= pwm_tcon_invert(s3c);
- __raw_writel(tcon, S3C2410_TCON);
+ writel_relaxed(tcon, s3c->base + S3C2410_TCON);

return 0;
}
--
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/