[PATCH] GPIO: MIPS: ralink: adds ralink gpio support
From: John Crispin
Date: Wed Apr 10 2013 - 09:13:16 EST
Add gpio driver for Ralink SoC. This driver makes the gpio core on
RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
---
.../devicetree/bindings/gpio/gpio-ralink.txt | 33 ++++
arch/mips/Kconfig | 1 +
arch/mips/include/asm/mach-ralink/gpio.h | 24 +++
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-ralink.c | 176 ++++++++++++++++++++
6 files changed, 241 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
create mode 100644 drivers/gpio/gpio-ralink.c
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
new file mode 100644
index 0000000..399a5a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
@@ -0,0 +1,33 @@
+Ralink SoC GPIO controller
+
+Ralink System on a Chip have 1 or more banks of gpios. Each bank can have up
+to 32 gpios. The layout of the registers varies between banks and SoC.
+
+Required properties:
+- compatible : Should be "ralink,rt2880-gpio"
+- reg : Address and length of the register set for the device
+- #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify optional parameters (currently
+ unused).
+- gpio-controller : Marks the device node as a gpio controller.
+- ralink,num-gpios : The number of GPIOs that this bank has
+- ralink,register-map : Each banks register layout depends on the bank
+ id and the SoC it is on. To make the driver flexible we need to define
+ the layout inside the DT.
+
+Example:
+
+palmbus@10000000 {
+ gpio0: gpio@600 {
+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio";
+ reg = <0x600 0x34>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ ralink,num-gpios = <24>;
+ ralink,register-map = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
+ };
+};
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e4da4f8..b237c50 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -443,6 +443,7 @@ config RALINK
select SYS_HAS_EARLY_PRINTK
select HAVE_MACH_CLKDEV
select CLKDEV_LOOKUP
+ select ARCH_REQUIRE_GPIOLIB
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
diff --git a/arch/mips/include/asm/mach-ralink/gpio.h b/arch/mips/include/asm/mach-ralink/gpio.h
new file mode 100644
index 0000000..f68ee16
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/gpio.h
@@ -0,0 +1,24 @@
+/*
+ * Ralink SoC GPIO API support
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@xxxxxxxxxxx>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_MACH_RALINK_GPIO_H
+#define __ASM_MACH_RALINK_GPIO_H
+
+#define ARCH_NR_GPIOS 128
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+#endif /* __ASM_MACH_RALINK_GPIO_H */
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 93aaadf..29add97 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -204,6 +204,12 @@ config GPIO_PXA
help
Say yes here to support the PXA GPIO device
+config GPIO_RALINK
+ bool "Ralink GPIO Support"
+ depends on RALINK
+ help
+ Say yes here to support the Ralink SoC GPIO device
+
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 22e07bc..f7b6603 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
+obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
diff --git a/drivers/gpio/gpio-ralink.c b/drivers/gpio/gpio-ralink.c
new file mode 100644
index 0000000..26e8441
--- /dev/null
+++ b/drivers/gpio/gpio-ralink.c
@@ -0,0 +1,176 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@xxxxxxxxxxx>
+ * Copyright (C) 2013 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+enum ralink_gpio_reg {
+ GPIO_REG_INT = 0,
+ GPIO_REG_EDGE,
+ GPIO_REG_RENA,
+ GPIO_REG_FENA,
+ GPIO_REG_DATA,
+ GPIO_REG_DIR,
+ GPIO_REG_POL,
+ GPIO_REG_SET,
+ GPIO_REG_RESET,
+ GPIO_REG_TOGGLE,
+ GPIO_REG_MAX
+};
+
+struct ralink_gpio_chip {
+ struct gpio_chip chip;
+ u8 regs[GPIO_REG_MAX];
+
+ spinlock_t lock;
+ void __iomem *membase;
+};
+
+static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip)
+{
+ struct ralink_gpio_chip *rg;
+
+ rg = container_of(chip, struct ralink_gpio_chip, chip);
+ return rg;
+}
+
+static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val)
+{
+ iowrite32(val, rg->membase + rg->regs[reg]);
+}
+
+static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg)
+{
+ return ioread32(rg->membase + rg->regs[reg]);
+}
+
+static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
+
+ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset));
+}
+
+static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
+
+ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset));
+}
+
+static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
+ unsigned long flags;
+ u32 t;
+
+ spin_lock_irqsave(&rg->lock, flags);
+ t = rt_gpio_r32(rg, GPIO_REG_DIR);
+ t &= ~BIT(offset);
+ rt_gpio_w32(rg, GPIO_REG_DIR, t);
+ spin_unlock_irqrestore(&rg->lock, flags);
+
+ return 0;
+}
+
+static int ralink_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip);
+ unsigned long flags;
+ u32 t;
+
+ spin_lock_irqsave(&rg->lock, flags);
+ ralink_gpio_set(chip, offset, value);
+ t = rt_gpio_r32(rg, GPIO_REG_DIR);
+ t |= BIT(offset);
+ rt_gpio_w32(rg, GPIO_REG_DIR, t);
+ spin_unlock_irqrestore(&rg->lock, flags);
+
+ return 0;
+}
+
+static int ralink_gpio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct ralink_gpio_chip *gc;
+ const __be32 *ngpio;
+
+ if (!res) {
+ dev_err(&pdev->dev, "failed to find resource\n");
+ return -ENOMEM;
+ }
+
+ gc = devm_kzalloc(&pdev->dev,
+ sizeof(struct ralink_gpio_chip), GFP_KERNEL);
+ if (!gc)
+ return -ENOMEM;
+
+ gc->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (!gc->membase) {
+ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
+ return -ENOMEM;
+ }
+
+ if (of_property_read_u8_array(np, "ralink,register-map",
+ gc->regs, GPIO_REG_MAX)) {
+ dev_err(&pdev->dev, "failed to read register definition\n");
+ return -EINVAL;
+ }
+
+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
+ if (!ngpio) {
+ dev_err(&pdev->dev, "failed to read number of pins\n");
+ return -EINVAL;
+ }
+
+ spin_lock_init(&gc->lock);
+
+ gc->chip.label = dev_name(&pdev->dev);
+ gc->chip.of_node = np;
+ gc->chip.base = -1;
+ gc->chip.ngpio = be32_to_cpu(*ngpio);
+ gc->chip.direction_input = ralink_gpio_direction_input;
+ gc->chip.direction_output = ralink_gpio_direction_output;
+ gc->chip.get = ralink_gpio_get;
+ gc->chip.set = ralink_gpio_set;
+
+ /* set polarity to low for all lines */
+ rt_gpio_w32(gc, GPIO_REG_POL, 0);
+
+ dev_info(&pdev->dev, "registering %d gpios\n", gc->chip.ngpio);
+
+ return gpiochip_add(&gc->chip);
+}
+
+static const struct of_device_id ralink_gpio_match[] = {
+ { .compatible = "ralink,rt2880-gpio" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ralink_gpio_match);
+
+static struct platform_driver ralink_gpio_driver = {
+ .probe = ralink_gpio_probe,
+ .driver = {
+ .name = "rt2880_gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = ralink_gpio_match,
+ },
+};
+
+static int __init ralink_gpio_init(void)
+{
+ return platform_driver_register(&ralink_gpio_driver);
+}
+
+subsys_initcall(ralink_gpio_init);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/