Re: [PATCH 0/15] arizona updates for v3.10

From: Mark Brown
Date: Mon Apr 08 2013 - 06:20:17 EST


On Mon, Apr 08, 2013 at 11:04:10AM +0100, Mark Brown wrote:

> patch series... I'm just re-tagging and re-pushing but were you testing
> both serieses together?

OK, the mirrors seem to have the rebase now. New pull request:

The following changes since commit 31880c37c11e28cb81c70757e38392b42e695dc6:

Linux 3.9-rc6 (2013-04-07 20:49:54 -0700)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git tags/mfd-arizona-3.10

for you to fetch changes up to 031eb8d52ecbe417cf778fba2d49bee90a078648:

mfd: wm5102: Don't wait for boot when boot sequencer is disabled (2013-04-08 11:12:04 +0100)

----------------------------------------------------------------
mfd: arizona: Updates for v3.10

This is really a few separate topics which I can split out if required:

- WM5102 updates to improve robustness
- Improved support for interoperation with edge triggered interrupt
controllers
- Support for some unusual clocking configurations
- A couple small single patch updates and fixes

----------------------------------------------------------------
Charles Keepax (7):
mfd: wm5102: Manually apply register patch
mfd: arizona: Factor out register polling
mfd: arizona: Add a hardware patch mechanism
mfd: wm5102: Deactivate standard boot sequence
mfd: wm5102: Update defaults to match patch
mfd: arizona: Wait for internal clocks to startup after reset
mfd: wm5102: Don't wait for boot when boot sequencer is disabled

Mark Brown (12):
mfd: arizona: Disable all wake sources by default
mfd: arizona: Clean up on failed runtime resume
mfd: arizona: Clarify error message for failed primary IRQ request
mfd: arizona: Basic support for edge triggered IRQs
mfd: arizona: Allow GPIO to be specified for IRQ line
mfd: arizona: Try to use interrupt flags from interrupt controller
mfd: arizona: Support configuring MICBIASes into bypass mode
mfd: wm5102: Update patch for latest evaluation
mfd: arizona: Fully support the use of MCLK1 as the 32kHz clock source
mfd: arizona: Unconditionally enable 32kHz clock
mfd: wm5102: Only use the lowest three bits of device revision
mfd: arizona: Hold device in reset while ramping supplies

arch/arm/mach-s3c64xx/mach-crag6410-module.c | 4 +-
drivers/mfd/arizona-core.c | 267 +++++++++++++++++++++-----
drivers/mfd/arizona-irq.c | 106 ++++++++--
drivers/mfd/wm5102-tables.c | 56 ++++--
include/linux/mfd/arizona/pdata.h | 7 +-
5 files changed, 357 insertions(+), 83 deletions(-)

Attachment: signature.asc
Description: Digital signature