Re: [RFC PATCH arm: initial TI-Nspire support]
From: Daniel Tang
Date: Sat Apr 06 2013 - 23:56:43 EST
Here's an updated patch that enables support for the LCD.
I looked into drivers/video/of_display_timing.c but it doesn't have the fields to describe the PL11x specific options needed in struct clcd_panel. At the moment, it is implemented by hardcoding the values in the kernel and using the device tree to select the correct configuration.
Signed-off-by: Daniel Tang <dt.tangr@xxxxxxxxx>
---
arch/arm/Kconfig | 2 +
arch/arm/Kconfig.debug | 16 +++
arch/arm/Makefile | 3 +-
arch/arm/boot/dts/nspire-cx.dts | 89 ++++++++++++++
arch/arm/boot/dts/nspire.dtsi | 157 +++++++++++++++++++++++++
arch/arm/include/debug/nspire.S | 28 +++++
arch/arm/mach-nspire/Kconfig | 12 ++
arch/arm/mach-nspire/Makefile | 1 +
arch/arm/mach-nspire/Makefile.boot | 0
arch/arm/mach-nspire/mmio.h | 15 +++
arch/arm/mach-nspire/nspire.c | 233 +++++++++++++++++++++++++++++++++++++
11 files changed, 555 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1cacda4..3f0cd8c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1081,6 +1081,8 @@ source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/mach-nspire/Kconfig"
+
source "arch/arm/plat-omap/Kconfig"
source "arch/arm/mach-omap1/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9b31f43..5da3a50 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -298,6 +298,20 @@ choice
Say Y here if you want kernel low-level debugging support
on MVEBU based platforms.
+ config DEBUG_NSPIRE_CLASSIC_UART
+ bool "Kernel low-level debugging via TI-NSPIRE 8250 UART"
+ depends on ARCH_NSPIRE
+ help
+ Say Y here if you want kernel low-level debugging support
+ on TI-NSPIRE classic models.
+
+ config DEBUG_NSPIRE_CX_UART
+ bool "Kernel low-level debugging via TI-NSPIRE PL011 UART"
+ depends on ARCH_NSPIRE
+ help
+ Say Y here if you want kernel low-level debugging support
+ on TI-NSPIRE CX models.
+
config DEBUG_OMAP2PLUS_UART
bool "Kernel low-level debugging messages via OMAP2PLUS UART"
depends on ARCH_OMAP2PLUS
@@ -591,6 +605,8 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6Q_UART
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
default "debug/mvebu.S" if DEBUG_MVEBU_UART
+ default "debug/nspire.S" if DEBUG_NSPIRE_CX_UART || \
+ DEBUG_NSPIRE_CLASSIC_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index ee4605f..f47a8a7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -165,6 +165,7 @@ machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
+machine-$(CONFIG_ARCH_NSPIRE) += nspire
machine-$(CONFIG_ARCH_OMAP1) += omap1
machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
@@ -313,7 +314,7 @@ define archhelp
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)'
echo ' uImage - U-Boot wrapped zImage'
- echo ' bootpImage - Combined zImage and initial RAM disk'
+ echo ' bootpImage - Combined zImage and initial RAM disk'
echo ' (supply initrd image via make variable INITRD=<path>)'
echo '* dtbs - Build device tree blobs for enabled boards'
echo ' install - Install uncompressed kernel'
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
new file mode 100644
index 0000000..d843e60
--- /dev/null
+++ b/arch/arm/boot/dts/nspire-cx.dts
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/arm/boot/nspire-cx.dts
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+
+/include/ "nspire.dtsi"
+
+/ {
+ model = "TI-NSPIRE CX";
+ compatible = "arm,nspire-cx";
+
+ memory {
+ device_type = "memory";
+ reg = <0x10000000 0x4000000>; /* 64 MB */
+ };
+
+ aliases {
+ uart0 = &uart0;
+ timer0 = &timer0;
+ timer1 = &timer1;
+ fast_timer = &fast_timer;
+ };
+
+ uart_clk: uart_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+
+ /* Not really a fixed clock but we'll fix this later */
+ apb_pclk: apb_pclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33000000>;
+ };
+
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ intc: interrupt-controller@DC000000 {
+ compatible = "arm,pl190-vic";
+ interrupt-controller;
+ reg = <0xDC000000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ lcd: lcd@C0000000 {
+ lcd-type = "cx";
+ };
+
+ apb@90000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ i2c@90050000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x90050000 0x1000>;
+ interrupts = <20>;
+ };
+
+ fast_timer: timer@90010000 {
+ compatible = "arm,sp804", "arm,primecell";
+ };
+
+ uart0: serial@90020000 {
+ compatible = "arm,pl011", "arm,primecell";
+ };
+
+ timer0: timer@900C0000 {
+ compatible = "arm,sp804", "arm,primecell";
+ };
+
+ timer1: timer@900D0000 {
+ compatible = "arm,sp804", "arm,primecell";
+ };
+ };
+ };
+ chosen {
+ bootargs = "debug earlyprintk console=ttyAMA0,115200n8 console=tty0";
+ };
+};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
new file mode 100644
index 0000000..5b6fad7
--- /dev/null
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -0,0 +1,157 @@
+/*
+ * linux/arch/arm/boot/nspire.dtsi
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926";
+ };
+ };
+
+ bootrom: bootrom@00000000 {
+ reg = <0x00000000 0x80000>;
+ };
+
+ sram: sram@A4000000 {
+ device = "memory";
+ reg = <0xA4000000 0x20000>;
+ };
+
+ timer_clk: timer_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ahb {
+ compatible = "arm,amba-bus", "simple-bus";
+ interrupt-parent = <&intc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ spi: spi@A9000000 {
+ reg = <0xA9000000 0x1000>;
+ };
+
+ usb0: usb@B0000000 {
+ reg = <0xB0000000 0x1000>;
+ interrupts = <8>;
+ };
+
+ usb1: usb@B4000000 {
+ reg = <0xB4000000 0x1000>;
+ interrupts = <9>;
+ status = "disabled";
+ };
+
+ lcd: lcd@C0000000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0xC0000000 0x1000>;
+ interrupts = <21>;
+
+ clocks = <&apb_pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ adc: adc@C4000000 {
+ reg = <0xC4000000 0x1000>;
+ interrupts = <11>;
+ };
+
+ tdes: crypto@C8010000 {
+ reg = <0xC8010000 0x1000>;
+ };
+
+ sha256: crypto@CC000000 {
+ reg = <0xCC000000 0x1000>;
+ };
+
+ apb@90000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&apb_pclk>;
+ clock-names = "apb_pclk";
+ clock-ranges;
+ ranges;
+
+ gpio: gpio@90000000 {
+ reg = <0x90000000 0x1000>;
+ interrupts = <7>;
+ };
+
+ fast_timer: timer@90010000 {
+ reg = <0x90010000 0x1000>;
+ interrupts = <17>;
+ };
+
+ uart: serial@90020000 {
+ reg = <0x90020000 0x1000>;
+ interrupts = <1>;
+
+ clocks = <&uart_clk>;
+ clock-names = "uart_clk";
+ };
+
+ timer0: timer@900C0000 {
+ reg = <0x900C0000 0x1000>;
+ interrupts = <18>;
+
+ clocks = <&timer_clk>;
+ clock-names = "timer_clk";
+ };
+
+ timer1: timer@900D0000 {
+ reg = <0x900D0000 0x1000>;
+ interrupts = <19>;
+
+ clocks = <&timer_clk>;
+ clock-names = "timer_clk";
+ };
+
+ watchdog: watchdog@90060000 {
+ compatible = "arm,amba-primecell";
+ reg = <0x90060000 0x1000>;
+ interrupts = <3>;
+ };
+
+ rtc: rtc@90090000 {
+ reg = <0x90090000 0x1000>;
+ interrupts = <4>;
+ };
+
+ misc: misc@900A0000 {
+ reg = <0x900A0000 0x1000>;
+ };
+
+ pwr: pwr@900B0000 {
+ reg = <0x900B0000 0x1000>;
+ interrupts = <15>;
+ };
+
+ keypad: input@900E0000 {
+ reg = <0x900E0000 0x1000>;
+ interrupts = <16>;
+ };
+
+ contrast: contrast@900F0000 {
+ reg = <0x900F0000 0x1000>;
+ };
+
+ led: led@90110000 {
+ reg = <0x90110000 0x1000>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/include/debug/nspire.S b/arch/arm/include/debug/nspire.S
new file mode 100644
index 0000000..3a9729c
--- /dev/null
+++ b/arch/arm/include/debug/nspire.S
@@ -0,0 +1,28 @@
+/*
+ * linux/arch/arm/include/debug/nspire.S
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define NSPIRE_EARLY_UART_PHYS_BASE 0x90020000
+#define NSPIRE_EARLY_UART_VIRT_BASE 0xfee20000
+
+.macro addruart, rp, rv, tmp
+ ldr \rp, =(NSPIRE_EARLY_UART_PHYS_BASE) @ physical base address
+ ldr \rv, =(NSPIRE_EARLY_UART_VIRT_BASE) @ virtual base address
+.endm
+
+
+#ifdef CONFIG_DEBUG_NSPIRE_CX_UART
+#include <asm/hardware/debug-pl01x.S>
+#endif
+
+#ifdef CONFIG_DEBUG_NSPIRE_CLASSIC_UART
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
+#endif
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
new file mode 100644
index 0000000..b6bf06c
--- /dev/null
+++ b/arch/arm/mach-nspire/Kconfig
@@ -0,0 +1,12 @@
+config ARCH_NSPIRE
+ bool "TI-NSPIRE based"
+ depends on MMU
+ select CPU_ARM926T
+ select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
+ select SPARSE_IRQ
+ select ARM_AMBA
+ select ARM_VIC
+ select ARM_TIMER_SP804
+ help
+ This enables support for systems using the TI-NSPIRE CPU
diff --git a/arch/arm/mach-nspire/Makefile b/arch/arm/mach-nspire/Makefile
new file mode 100644
index 0000000..c96c2c4
--- /dev/null
+++ b/arch/arm/mach-nspire/Makefile
@@ -0,0 +1 @@
+obj-y += nspire.o
diff --git a/arch/arm/mach-nspire/Makefile.boot b/arch/arm/mach-nspire/Makefile.boot
new file mode 100644
index 0000000..e69de29
diff --git a/arch/arm/mach-nspire/mmio.h b/arch/arm/mach-nspire/mmio.h
new file mode 100644
index 0000000..f0a1fa5
--- /dev/null
+++ b/arch/arm/mach-nspire/mmio.h
@@ -0,0 +1,15 @@
+/*
+ * linux/arch/arm/mach-nspire/mmio.h
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define NSPIRE_EARLY_UART_PHYS_BASE 0x90020000
+#define NSPIRE_EARLY_UART_VIRT_BASE 0xfee20000
+
+#define NSPIRE_LCD_PHYS_BASE 0xC0000000
diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c
new file mode 100644
index 0000000..e349c80
--- /dev/null
+++ b/arch/arm/mach-nspire/nspire.c
@@ -0,0 +1,233 @@
+/*
+ * linux/arch/arm/mach-nspire/nspire.c
+ *
+ * Copyright (C) 2012 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/init.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-vic.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <asm/hardware/timer-sp.h>
+
+#include "mmio.h"
+
+static const char *nspire_dt_match[] __initconst = {
+ "arm,nspire",
+ "arm,nspire-cx",
+ "arm,nspire-tp",
+ "arm,nspire-clp",
+ NULL,
+};
+
+static struct map_desc nspire_io_desc[] __initdata = {
+ {
+ .virtual = NSPIRE_EARLY_UART_VIRT_BASE,
+ .pfn = __phys_to_pfn(NSPIRE_EARLY_UART_PHYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init nspire_init_timer(void)
+{
+ struct device_node *timer;
+ void __iomem *base;
+ const char *path;
+ struct clk *clk;
+ int irq, err;
+
+ of_clk_init(NULL);
+
+ err = of_property_read_string(of_aliases, "timer0", &path);
+ if (WARN_ON(err))
+ return;
+
+ timer = of_find_node_by_path(path);
+ base = of_iomap(timer, 0);
+ if (WARN_ON(!base))
+ return;
+
+ clk = of_clk_get_by_name(timer, NULL);
+ clk_register_clkdev(clk, timer->name, "sp804");
+
+ sp804_clocksource_init(base, timer->name);
+
+ err = of_property_read_string(of_aliases, "timer1", &path);
+ if (WARN_ON(err))
+ return;
+
+ timer = of_find_node_by_path(path);
+ base = of_iomap(timer, 0);
+ if (WARN_ON(!base))
+ return;
+
+ clk = of_clk_get_by_name(timer, NULL);
+ clk_register_clkdev(clk, timer->name, "sp804");
+
+ irq = irq_of_parse_and_map(timer, 0);
+ sp804_clockevents_init(base, irq, timer->name);
+}
+
+static void __init nspire_map_io(void)
+{
+ iotable_init(nspire_io_desc, ARRAY_SIZE(nspire_io_desc));
+}
+
+static struct clcd_panel nspire_cx_lcd_panel = {
+ .mode = {
+ .name = "Color LCD",
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .pixclock = 1,
+ .hsync_len = 6,
+ .vsync_len = 1,
+ .right_margin = 50,
+ .left_margin = 38,
+ .lower_margin = 3,
+ .upper_margin = 17,
+ },
+ .width = 65, /* ~6.50 cm */
+ .height = 49, /* ~4.87 cm */
+ .tim2 = TIM2_IPC,
+ .cntl = (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
+ CNTL_LCDBPP16_565),
+ .bpp = 16,
+};
+
+static struct clcd_panel nspire_classic_lcd_panel = {
+ .mode = {
+ .name = "Grayscale LCD",
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .pixclock = 1,
+ .hsync_len = 6,
+ .vsync_len = 1,
+ .right_margin = 6,
+ .left_margin = 6,
+ },
+ .width = 71, /* 7.11cm */
+ .height = 53, /* 5.33cm */
+ .tim2 = 0x80007d0,
+ .cntl = CNTL_LCDBPP8 | CNTL_LCDMONO8,
+ .bpp = 8,
+ .grayscale = 1
+};
+
+static int nspire_clcd_setup(struct clcd_fb *fb)
+{
+ struct clcd_panel *panel;
+ size_t panel_size;
+ const char *type;
+ dma_addr_t dma;
+ int err;
+
+ BUG_ON(!fb->dev->dev.of_node);
+
+ err = of_property_read_string(fb->dev->dev.of_node, "lcd-type", &type);
+ if (err) {
+ pr_err("CLCD: Could not find lcd-type property\n");
+ return err;
+ }
+
+ if (!strcmp(type, "cx"))
+ {
+ panel = &nspire_cx_lcd_panel;
+ }
+ else if (!strcmp(type, "classic"))
+ {
+ panel = &nspire_classic_lcd_panel;
+ }
+ else
+ {
+ pr_err("CLCD: Unknown lcd-type %s\n", type);
+ return -EINVAL;
+ }
+
+ panel_size = ((panel->mode.xres * panel->mode.yres) * panel->bpp) / 8;
+ panel_size = ALIGN(panel_size, PAGE_SIZE);
+
+ fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
+ panel_size, &dma, GFP_KERNEL);
+
+ if (!fb->fb.screen_base) {
+ pr_err("CLCD: unable to map framebuffer\n");
+ return -ENOMEM;
+ }
+
+ fb->fb.fix.smem_start = dma;
+ fb->fb.fix.smem_len = panel_size;
+ fb->panel = panel;
+
+ return 0;
+}
+
+int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ return dma_mmap_writecombine(&fb->dev->dev, vma,
+ fb->fb.screen_base, fb->fb.fix.smem_start,
+ fb->fb.fix.smem_len);
+}
+
+void nspire_clcd_remove(struct clcd_fb *fb)
+{
+ dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+ fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board nspire_clcd_data = {
+ .name = "LCD",
+ .check = clcdfb_check,
+ .decode = clcdfb_decode,
+ .setup = nspire_clcd_setup,
+ .mmap = nspire_clcd_mmap,
+ .remove = nspire_clcd_remove,
+};
+
+
+static struct of_dev_auxdata nspire_auxdata[] __initdata = {
+ OF_DEV_AUXDATA("arm,pl111", NSPIRE_LCD_PHYS_BASE,
+ NULL, &nspire_clcd_data),
+ { }
+};
+
+static void __init nspire_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ nspire_auxdata, NULL);
+}
+
+static void nspire_restart(char mode, const char *cmd)
+{
+}
+
+DT_MACHINE_START(NSPIRE, "TI-NSPIRE")
+ .map_io = nspire_map_io,
+ .init_irq = irqchip_init,
+ .init_time = nspire_init_timer,
+ .init_machine = nspire_init,
+ .dt_compat = nspire_dt_match,
+ .restart = nspire_restart,
+MACHINE_END
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/