Re: [PATCH 0/15] arizona updates for v3.10

From: Mark Brown
Date: Wed Apr 03 2013 - 14:04:30 EST


On Mon, Apr 01, 2013 at 06:27:48PM +0100, Mark Brown wrote:

> mfd: arizona: Updates for v3.10
>
> This is really a few separate topics which I can split out if required:
>
> - WM5102 updates to improve robustness
> - Improved support for interoperation with edge triggered interrupt
> controllers
> - Support for some unusual clocking configurations
> - A couple small single patch updates and fixes
>

A few more updates for this which I'll post just now, I've updated the
tag and branch:

The following changes since commit 07961ac7c0ee8b546658717034fe692fd12eefa9:

Linux 3.9-rc5 (2013-03-31 15:12:43 -0700)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc.git tags/mfd-arizona-3.10

for you to fetch changes up to 241979cb90eb0ed5814a5b207298518a25b3f032:

mfd: wm5102: Don't wait for boot when boot sequencer is disabled (2013-04-03 14:19:22 +0100)

----------------------------------------------------------------
mfd: arizona: Updates for v3.10

This is really a few separate topics which I can split out if required:

- WM5102 updates to improve robustness
- Improved support for interoperation with edge triggered interrupt
controllers
- Support for some unusual clocking configurations
- A couple small single patch updates and fixes

----------------------------------------------------------------
Charles Keepax (7):
mfd: wm5102: Manually apply register patch
mfd: arizona: Factor out register polling
mfd: arizona: Add a hardware patch mechanism
mfd: wm5102: Deactivate standard boot sequence
mfd: wm5102: Update defaults to match patch
mfd: arizona: Wait for internal clocks to startup after reset
mfd: wm5102: Don't wait for boot when boot sequencer is disabled

Mark Brown (11):
mfd: arizona: Disable all wake sources by default
mfd: arizona: Clarify error message for failed primary IRQ request
mfd: arizona: Basic support for edge triggered IRQs
mfd: arizona: Allow GPIO to be specified for IRQ line
mfd: arizona: Try to use interrupt flags from interrupt controller
mfd: arizona: Support configuring MICBIASes into bypass mode
mfd: wm5102: Update patch for latest evaluation
mfd: arizona: Fully support the use of MCLK1 as the 32kHz clock source
mfd: arizona: Unconditionally enable 32kHz clock
mfd: wm5102: Only use the lowest three bits of device revision
mfd: arizona: Hold device in reset while ramping supplies

arch/arm/mach-s3c64xx/mach-crag6410-module.c | 4 +-
drivers/mfd/arizona-core.c | 253 +++++++++++++++++++++-----
drivers/mfd/arizona-irq.c | 106 +++++++++--
drivers/mfd/wm5102-tables.c | 56 ++++--
include/linux/mfd/arizona/pdata.h | 7 +-
5 files changed, 345 insertions(+), 81 deletions(-)

Attachment: signature.asc
Description: Digital signature