[PATCH 11/12] usb: phy: ab8500-usb: drop link status delayed work

From: Fabio Baltieri
Date: Wed Apr 03 2013 - 04:48:41 EST


From: Sakethram Bommisetti <sakethram.bommisetti@xxxxxxxxxxxxxx>

ab8500_usb_delayed_work was implemented as a workaroud for the internal
only and now unsupported v1.0 version of AB850. This patch removes the
delayed work and just leave a link status update call at probe time.

Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@xxxxxxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
---
drivers/usb/phy/phy-ab8500-usb.c | 30 ++----------------------------
1 file changed, 2 insertions(+), 28 deletions(-)

diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index 0875e2b..30adfee 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -124,9 +124,7 @@ struct ab8500_usb {
struct device *dev;
struct ab8500 *ab8500;
unsigned vbus_draw;
- struct delayed_work dwork;
struct work_struct phy_dis_work;
- unsigned long link_status_wait;
enum ab8500_usb_mode mode;
struct regulator *v_ape;
struct regulator *v_musb;
@@ -556,14 +554,6 @@ static irqreturn_t ab8500_usb_link_status_irq(int irq, void *data)
return IRQ_HANDLED;
}

-static void ab8500_usb_delayed_work(struct work_struct *work)
-{
- struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
- dwork.work);
-
- abx500_usb_link_status_update(ab);
-}
-
static void ab8500_usb_phy_disable_work(struct work_struct *work)
{
struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
@@ -634,12 +624,6 @@ static int ab8500_usb_set_peripheral(struct usb_otg *otg,
} else {
otg->gadget = gadget;
otg->phy->state = OTG_STATE_B_IDLE;
-
- /* Phy will not be enabled if cable is already
- * plugged-in. Schedule to enable phy.
- * Use same delay to avoid any race condition.
- */
- schedule_delayed_work(&ab->dwork, ab->link_status_wait);
}

return 0;
@@ -664,11 +648,6 @@ static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
schedule_work(&ab->phy_dis_work);
} else {
otg->host = host;
- /* Phy will not be enabled if cable is already
- * plugged-in. Schedule to enable phy.
- * Use same delay to avoid any race condition.
- */
- schedule_delayed_work(&ab->dwork, ab->link_status_wait);
}

return 0;
@@ -791,11 +770,6 @@ static int ab8500_usb_probe(struct platform_device *pdev)

ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier);

- /* v1: Wait for link status to become stable.
- * all: Updates form set_host and set_peripheral as they are atomic.
- */
- INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work);
-
/* all: Disable phy when called from set_host and set_peripheral */
INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);

@@ -892,6 +866,8 @@ static int ab8500_usb_probe(struct platform_device *pdev)
/* Needed to enable ID detection. */
ab8500_usb_wd_workaround(ab);

+ abx500_usb_link_status_update(ab);
+
dev_info(&pdev->dev, "revision 0x%2x driver initialized\n", rev);

return 0;
@@ -901,8 +877,6 @@ static int ab8500_usb_remove(struct platform_device *pdev)
{
struct ab8500_usb *ab = platform_get_drvdata(pdev);

- cancel_delayed_work_sync(&ab->dwork);
-
cancel_work_sync(&ab->phy_dis_work);

usb_remove_phy(&ab->phy);
--
1.8.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/