[PATCH 11/16] extcon: arizona: Don't ground flip when using HPDET identification

[Mark Brown]

This extra check makes the procedure take longer and is of marginal use
in identification so do not execute it.

Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
 drivers/extcon/extcon-arizona.c |   24 +-----------------------
 1 file changed, 1 insertion(+), 23 deletions(-)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index c18cf14..7c4ce81 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -470,29 +470,7 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading)
 	 */
 	if (arizona->pdata.hpdet_acc_id) {
 		info->hpdet_res[info->num_hpdet_res++] = *reading;
-
-		/*
-		 * If the impedence is too high don't measure the
-		 * second ground.
-		 */
-		if (info->num_hpdet_res == 1 && *reading >= 45) {
-			dev_dbg(arizona->dev, "Skipping ground flip\n");
-			info->hpdet_res[info->num_hpdet_res++] = *reading;
-		}
-
-		if (info->num_hpdet_res == 1) {
-			dev_dbg(arizona->dev, "Flipping ground\n");
-
-			regmap_update_bits(arizona->regmap,
-					   ARIZONA_ACCESSORY_DETECT_MODE_1,
-					   ARIZONA_ACCDET_SRC,
-					   ~info->micd_modes[0].src);
-
-			regmap_update_bits(arizona->regmap,
-					   ARIZONA_HEADPHONE_DETECT_1,
-					   ARIZONA_HP_POLL, ARIZONA_HP_POLL);
-			return -EAGAIN;
-		}
+		info->hpdet_res[info->num_hpdet_res++] = *reading;
 
 		/* Only check the mic directly if we didn't already ID it */
 		if (id_gpio && info->num_hpdet_res == 2 &&
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/