[PATCH v2 1/2] usb: gadget: fusb300_udc: add FUSB300_EPSET0_STL_CLR for clearing EP0 stall

[Yuan-Hsin Chen]

The final version of fusb300 controller adds EPSET0_STL_CLR
for clearing EP0 stall and also removes EPSET0_EPn_TX0BYTE.

fusb300_udc driver is tested on FARADAY platform a369 with
FUSB300 FPGA v1.8

Signed-off-by: Yuan-Hsin Chen <yhchen@xxxxxxxxxxxxxxxx>
---

v2:
split patch

 drivers/usb/gadget/fusb300_udc.c |    2 +-
 drivers/usb/gadget/fusb300_udc.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c
index 72cd5e6..c20cc58 100644
--- a/drivers/usb/gadget/fusb300_udc.c
+++ b/drivers/usb/gadget/fusb300_udc.c
@@ -394,7 +394,7 @@ static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep)
 
 	if (reg & FUSB300_EPSET0_STL) {
 		printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep);
-		reg &= ~FUSB300_EPSET0_STL;
+		reg |= FUSB300_EPSET0_STL_CLR;
 		iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
 	}
 }
diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h
index 542cd83..ccae1b5 100644
--- a/drivers/usb/gadget/fusb300_udc.h
+++ b/drivers/usb/gadget/fusb300_udc.h
@@ -111,8 +111,8 @@
 /*
  * * EPn Setting 0 (EPn_SET0, offset = 020H+(n-1)*30H, n=1~15 )
  * */
+#define FUSB300_EPSET0_STL_CLR		(1 << 3)
 #define FUSB300_EPSET0_CLRSEQNUM	(1 << 2)
-#define FUSB300_EPSET0_EPn_TX0BYTE	(1 << 1)
 #define FUSB300_EPSET0_STL		(1 << 0)
 
 /*
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/