Re: [PATCH v3] USB: PHY: Palmas USB Transceiver Driver

[Kishon Vijay Abraham I]

Hi,

On Monday 25 March 2013 03:16 PM, Laxman Dewangan wrote:
> On Monday 25 March 2013 03:02 PM, Kishon Vijay Abraham I wrote:
> > From: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
> >
> > This is the driver for the OTG transceiver built into the Palmas chip. It
> > handles the various USB OTG events that can be generated by cable
> > insertion/removal.
> >
> > Signed-off-by: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
> > Signed-off-by: Moiz Sonasath <m-sonasath@xxxxxx>
> > Signed-off-by: Ruchika Kharwar <ruchika@xxxxxx>
> > Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> > Signed-off-by: Sebastien Guiriec <s-guiriec@xxxxxx>
> > ---
>
> I think this driver is more over the cable connection like vbus
> detetcion or ID pin detection.
> Then why not it is implemented based on extcon framework?

extcon framework uses notification mechanism and Felipe dint like using 
notification here. right Felipe?
> That way, generic usb driver (like tegra_usb driver) will get
> notification through extcon.
>
> We need this cable detection through extcon on our tegra solution
> through the Palmas.
>
>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +
> +static int palmas_usb_read(struct palmas *palmas, unsigned int reg,
> +               unsigned int *dest)
> +{
> +       unsigned int addr;
> +       int slave;
> +
> +       slave = PALMAS_BASE_TO_SLAVE(PALMAS_USB_OTG_BASE);
> +       addr = PALMAS_BASE_TO_REG(PALMAS_USB_OTG_BASE, reg);
> +
> +       return regmap_read(palmas->regmap[slave], addr, dest);
>
>
> Please use the generic api for palmas_read()/palmas_write(0 as it will
> be ease on debugging on register access.
> Direct regmap_read() does not help much on this.

Graeme,
Any reason why you dint use palmas_read()/palmas_write here?
Btw palmas_read()/palmas_write() internally uses regmap APIs.
> > +}
> > +
> > +static int palmas_usb_write(struct palmas *palmas, unsigned int reg,
> > +               unsigned int data)
> > +{
> > +       unsigned int addr;
> > +       int slave;
> > +
> > +       slave = PALMAS_BASE_TO_SLAVE(PALMAS_USB_OTG_BASE);
> > +       addr = PALMAS_BASE_TO_REG(PALMAS_USB_OTG_BASE, reg);
> > +
> > +       return regmap_write(palmas->regmap[slave], addr, data);
>
> Same as above.
>
>
>
> > +
> > +       if (status != OMAP_DWC3_UNKNOWN) {
> > +               palmas_usb->linkstat = status;
> > +               palmas_usb->mailboxstat = dwc3_omap_mailbox(status);
> Omap specific call, why? This is generic palma driver.

hmm.. I think we should either fall-back to the notification mechanism 
or have the client drivers pass function pointer here. Felipe?
> > +
>
> > +       palmas_usb->dev         = &pdev->dev;
> > +
> > +       palmas_usb->irq1 = regmap_irq_get_virq(palmas->irq_data,
> > +                                               PALMAS_ID_OTG_IRQ);
> > +       palmas_usb->irq2 = regmap_irq_get_virq(palmas->irq_data,
> > +                                               PALMAS_ID_IRQ);
> > +       palmas_usb->irq3 = regmap_irq_get_virq(palmas->irq_data,
> > +                                               PALMAS_VBUS_OTG_IRQ);
> > +       palmas_usb->irq4 = regmap_irq_get_virq(palmas->irq_data,
> > +                                               PALMAS_VBUS_IRQ);
>
> Should be come from platform_get_irq() through platform driver.

No. It can be obtained from regmap too.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/