Re: [BUG] bisected: PandaBoard smsc95xx ethernet driver error fromUSB timeout

[Frank Rowand]

On 03/22/13 03:03, Mats Liljegren wrote:
> Frank Rowand wrote:
>> On 03/21/13 07:41, Alan Stern wrote:
>>> On Wed, 20 Mar 2013, Frank Rowand wrote:
>>>
>>>> Hi All,
>>>>
>>>> Not quite sure quite where the problem is (USB, OMAP, smsc95xx driver, other???),
>>>> so casting the nets wide...
>>>>
>>>> The PandaBoard frequently fails to boot with an eth0 error when mounting
>>>> the root file system via NFS (ethernet driver fails due to a USB timeout;
>>>> no ethernet means NFS won't work).  A typical set of error messages is:
>>>>
>>>> [    3.264373] smsc95xx 1-1.1:1.0: usb_probe_interface
>>>> [    3.269500] smsc95xx 1-1.1:1.0: usb_probe_interface - got id
>>>> [    3.275543] smsc95xx v1.0.4
>>>> [    8.078674] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 82:b9:1d:fa:67:0d
>>>> [    8.091003] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
>>>> [   13.509918] usb 1-1.1: swapper/0 timed out on ep0out len=0/4
>>>> [   13.515869] smsc95xx 1-1.1:1.0: eth0: Failed to write register index 0x00000108
>>>> [   13.523559] smsc95xx 1-1.1:1.0: eth0: Failed to write ADDRL: -110
>>>> [   13.529998] IP-Config: Failed to open eth0
>>>>
>>>> I have bisected this to:
>>>>
>>>>   commit 18aafe64d75d0e27dae206cacf4171e4e485d285
>>>>   Author: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
>>>>   Date:   Wed Jul 11 11:23:04 2012 -0400
>>>>
>>>>      USB: EHCI: use hrtimer for the I/O watchdog
>>>
>>> I don't understand how that commit could cause a timeout unless there 
>>> are at least two other bugs present in your system.
>>>
>>>> Note that to compile this version of the kernel, an additional fix must
>>>> also be applied:
>>>>
>>>>   commit ba5952e0711b14d8d4fe172671f8aa6091ace3ee
>>>>   Author: Ming Lei <ming.lei@xxxxxxxxxxxxx>
>>>>   Date:   Fri Jul 13 17:25:24 2012 +0800
>>>>
>>>>      USB: ehci-omap: fix compile failure(v1)
>>>>
>>>> The symptom can be worked around by retrying the USB access if a timeout
>>>> occurs.  This is clearly _not_ the fix, just a hack that I used to
>>>> investigate the problem:
>>>>
>>>>   http://article.gmane.org/gmane.linux.rt.user/9773
>>>>
>>>> My kernel configuration is:
>>>>
>>>>   arch/arm/configs/omap2plus_defconfig
>>>>
>>>>   plus to get the ethernet driver I add:
>>>>
>>>>     CONFIG_USB_EHCI_HCD
>>>>     CONFIG_USB_NET_SMSC95XX
>>>>
>>>> I found the problem on 3.6.11, but have not replicated it on 3.9-rcX
>>>> yet because my config fails to build on 3.9-rc1 and 3.9-rc2.  I'll try
>>>> to work on that issue tomorrow.
>>>
>>> Let me know how it works out.
>>
>> My PandaBoard builds fail on 3.9-rcX due to ARM multiplatform issues.
>> Either there is something I need to change about the way I build it,
>> or it is broken (that is a side issue).  My simple expedient was to
>> hack around multiplatform, and just make it build (patch below if
>> anyone else wants a _temporary_ hack).
> 
> I have built 3.9-RC2 for PandaBoard ES and the only problem I have seen is
> that you need to add "LOADADDR=0x80008000" when building uImage target.

Yes, that is essentially what my hack patch does.  The result of my patch
is that arch/arm/boot/Makefile is invoked with MACHINE="arch/arm/mach-omap2"
so that at the top of the makefile, the "include $(srctree)/$(MACHINE)/Makefile.boot"
which pulls in the proper values for addresses.

-Frank


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/