Re: [BUG] bisected: PandaBoard smsc95xx ethernet driver error fromUSB timeout

[Roger Quadros]

Hi Frank,

On 03/22/2013 04:45 AM, Frank Rowand wrote:
> On 03/21/13 07:41, Alan Stern wrote:
>> On Wed, 20 Mar 2013, Frank Rowand wrote:
>>
>>> Hi All,
>>>
>>> Not quite sure quite where the problem is (USB, OMAP, smsc95xx driver, other???),
>>> so casting the nets wide...
>>>
>>> The PandaBoard frequently fails to boot with an eth0 error when mounting
>>> the root file system via NFS (ethernet driver fails due to a USB timeout;
>>> no ethernet means NFS won't work).  A typical set of error messages is:
>>>
>>> [    3.264373] smsc95xx 1-1.1:1.0: usb_probe_interface
>>> [    3.269500] smsc95xx 1-1.1:1.0: usb_probe_interface - got id
>>> [    3.275543] smsc95xx v1.0.4
>>> [    8.078674] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 82:b9:1d:fa:67:0d
>>> [    8.091003] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002
>>> [   13.509918] usb 1-1.1: swapper/0 timed out on ep0out len=0/4
>>> [   13.515869] smsc95xx 1-1.1:1.0: eth0: Failed to write register index 0x00000108
>>> [   13.523559] smsc95xx 1-1.1:1.0: eth0: Failed to write ADDRL: -110
>>> [   13.529998] IP-Config: Failed to open eth0
>>>
>>> I have bisected this to:
>>>
>>>   commit 18aafe64d75d0e27dae206cacf4171e4e485d285
>>>   Author: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
>>>   Date:   Wed Jul 11 11:23:04 2012 -0400
>>>
>>>      USB: EHCI: use hrtimer for the I/O watchdog
>>
>> I don't understand how that commit could cause a timeout unless there 
>> are at least two other bugs present in your system.
>>
>>> Note that to compile this version of the kernel, an additional fix must
>>> also be applied:
>>>
>>>   commit ba5952e0711b14d8d4fe172671f8aa6091ace3ee
>>>   Author: Ming Lei <ming.lei@xxxxxxxxxxxxx>
>>>   Date:   Fri Jul 13 17:25:24 2012 +0800
>>>
>>>      USB: ehci-omap: fix compile failure(v1)
>>>
>>> The symptom can be worked around by retrying the USB access if a timeout
>>> occurs.  This is clearly _not_ the fix, just a hack that I used to
>>> investigate the problem:
>>>
>>>   http://article.gmane.org/gmane.linux.rt.user/9773
>>>
>>> My kernel configuration is:
>>>
>>>   arch/arm/configs/omap2plus_defconfig
>>>
>>>   plus to get the ethernet driver I add:
>>>
>>>     CONFIG_USB_EHCI_HCD
>>>     CONFIG_USB_NET_SMSC95XX
>>>
>>> I found the problem on 3.6.11, but have not replicated it on 3.9-rcX
>>> yet because my config fails to build on 3.9-rc1 and 3.9-rc2.  I'll try
>>> to work on that issue tomorrow.
>>
>> Let me know how it works out.
> 
> My PandaBoard builds fail on 3.9-rcX due to ARM multiplatform issues.
> Either there is something I need to change about the way I build it,
> or it is broken (that is a side issue).  My simple expedient was to
> hack around multiplatform, and just make it build (patch below if
> anyone else wants a _temporary_ hack).

This is a known issue and will be resolved the proper way in 3.10.
For 3.9 you could also use a temporary fix posted here

http://thread.gmane.org/gmane.linux.usb.general/82693/

> 
> The problem appears to not be present in 3.9-rc3.  In older kernel versions, 
> the worst case to see the problem was 18 boots.  For 3.9-rc3 I booted 42
> times without seeing the problem.

This is good to hear.

> 
> The problem occurs at least up through 3.8.  I'll try to reverse bisect
> between 3.8 and 3.9-rc3 to see when the problem disappeared (I'm running
> short of time, so no promises for a near term result).

Thanks for the tests. There were a lot of OMAP EHCI related cleanup/fixes [1]
that went into 3.9. It would be interesting to know what fixed it.

[1] - https://lkml.org/lkml/2013/1/23/155

cheers,
-roger


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/