[PATCHv2 2/2] serial: of_serial: Handle fifo-size property

[Heikki Krogerus]

This will reduce the need for extra types in 8250.c just
in case the fifo size differs from the standard.

Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/tty/serial/of-serial.txt |    1 +
 drivers/tty/serial/of_serial.c                             |    4 ++++
 2 files changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
index 8f01cb1..c13f0ce 100644
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -33,6 +33,7 @@ Optional properties:
   RTAS and should not be registered.
 - no-loopback-test: set to indicate that the port does not implements loopback
   test mode
+- fifo-size: the fifo size of the UART.
 
 Example:
 
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index b025d54..267711b 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -97,6 +97,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 	if (of_property_read_u32(np, "reg-shift", &prop) == 0)
 		port->regshift = prop;
 
+	/* Check for fifo size */
+	if (of_property_read_u32(np, "fifo-size", &prop) == 0)
+		port->fifosize = prop;
+
 	port->irq = irq_of_parse_and_map(np, 0);
 	port->iotype = UPIO_MEM;
 	if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/