[PATCH 20/46] regulator: ab8500: Add support for the ab9540

From: Lee Jones
Date: Thu Mar 21 2013 - 12:09:04 EST

To obtain full AB9540 regulator support, the AB8500 regulator driver
first needs to know its register layout and their initialisation values
for each. That information is provided via a couple of large data
structures which we provide here.

Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
drivers/regulator/ab8500.c | 582 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 573 insertions(+), 9 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 953be4c..a1b1a48 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -375,6 +375,7 @@ static struct regulator_ops ab8500_regulator_ops = {
.list_voltage = regulator_list_voltage_table,
};

+/* AB8500 regulator information */
static struct ab8500_regulator_info
ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
/*
@@ -576,8 +577,264 @@ static struct ab8500_regulator_info
.update_val_idle = 0x0c,
.update_val_normal = 0x04,
},
+};

+/* AB9540 regulator information */
+static struct ab8500_regulator_info
+ ab9540_regulator_info[AB9540_NUM_REGULATORS] = {
+ /*
+ * Variable Voltage Regulators
+ * name, min mV, max mV,
+ * update bank, reg, mask, enable val
+ * volt bank, reg, mask, table, table length
+ */
+ [AB9540_LDO_AUX1] = {
+ .desc = {
+ .name = "LDO-AUX1",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX1,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x04,
+ .update_reg = 0x09,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x1f,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB9540_LDO_AUX2] = {
+ .desc = {
+ .name = "LDO-AUX2",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX2,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x04,
+ .update_reg = 0x09,
+ .update_mask = 0x0c,
+ .update_val = 0x04,
+ .update_val_idle = 0x0c,
+ .update_val_normal = 0x04,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x20,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB9540_LDO_AUX3] = {
+ .desc = {
+ .name = "LDO-AUX3",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX3,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x04,
+ .update_reg = 0x0a,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x21,
+ .voltage_mask = 0x07,
+ .voltages = ldo_vaux3_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vaux3_voltages),
+ },
+ [AB9540_LDO_AUX4] = {
+ .desc = {
+ .name = "LDO-AUX4",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB9540_LDO_AUX4,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ /* values for Vaux4Regu register */
+ .update_bank = 0x04,
+ .update_reg = 0x2e,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ /* values for Vaux4SEL register */
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x2f,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB9540_LDO_INTCORE] = {
+ .desc = {
+ .name = "LDO-INTCORE",
+ .ops = &ab8500_regulator_volt_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_INTCORE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .load_lp_uA = 5000,
+ .update_bank = 0x03,
+ .update_reg = 0x80,
+ .update_mask = 0x44,
+ .update_val = 0x44,
+ .update_val_idle = 0x44,
+ .update_val_normal = 0x04,
+ .voltage_bank = 0x03,
+ .voltage_reg = 0x80,
+ .voltage_mask = 0x38,
+ .voltages = ldo_vintcore_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vintcore_voltages),
+ .voltage_shift = 3,
+ },

+ /*
+ * Fixed Voltage Regulators
+ * name, fixed mV,
+ * update bank, reg, mask, enable val
+ */
+ [AB9540_LDO_TVOUT] = {
+ .desc = {
+ .name = "LDO-TVOUT",
+ .ops = &ab8500_regulator_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_TVOUT,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .delay = 10000,
+ .fixed_uV = 2000000,
+ .load_lp_uA = 1000,
+ .update_bank = 0x03,
+ .update_reg = 0x80,
+ .update_mask = 0x82,
+ .update_val = 0x02,
+ .update_val_idle = 0x82,
+ .update_val_normal = 0x02,
+ },
+ [AB9540_LDO_USB] = {
+ .desc = {
+ .name = "LDO-USB",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB9540_LDO_USB,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 3300000,
+ .update_bank = 0x03,
+ .update_reg = 0x82,
+ .update_mask = 0x03,
+ .update_val = 0x01,
+ .update_val_idle = 0x03,
+ .update_val_normal = 0x01,
+ },
+ [AB9540_LDO_AUDIO] = {
+ .desc = {
+ .name = "LDO-AUDIO",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUDIO,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2000000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x02,
+ .update_val = 0x02,
+ },
+ [AB9540_LDO_ANAMIC1] = {
+ .desc = {
+ .name = "LDO-ANAMIC1",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANAMIC1,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2050000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x08,
+ .update_val = 0x08,
+ },
+ [AB9540_LDO_ANAMIC2] = {
+ .desc = {
+ .name = "LDO-ANAMIC2",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANAMIC2,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2050000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x10,
+ .update_val = 0x10,
+ },
+ [AB9540_LDO_DMIC] = {
+ .desc = {
+ .name = "LDO-DMIC",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_DMIC,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 1800000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x04,
+ .update_val = 0x04,
+ },
+
+ /*
+ * Regulators with fixed voltage and normal/idle modes
+ */
+ [AB9540_LDO_ANA] = {
+ .desc = {
+ .name = "LDO-ANA",
+ .ops = &ab8500_regulator_mode_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANA,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 1200000,
+ .load_lp_uA = 1000,
+ .update_bank = 0x04,
+ .update_reg = 0x06,
+ .update_mask = 0x0c,
+ .update_val = 0x08,
+ .update_val_idle = 0x0c,
+ .update_val_normal = 0x08,
+ },
};

struct ab8500_reg_init {
@@ -593,6 +850,7 @@ struct ab8500_reg_init {
.mask = _mask, \
}

+/* AB8500 register init */
static struct ab8500_reg_init ab8500_reg_init[] = {
/*
* 0x30, VanaRequestCtrl
@@ -763,6 +1021,281 @@ static struct ab8500_reg_init ab8500_reg_init[] = {
REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x16),
};

+/* AB9540 register init */
+static struct ab8500_reg_init ab9540_reg_init[] = {
+ /*
+ * 0x03, VarmRequestCtrl
+ * 0x0c, VapeRequestCtrl
+ * 0x30, Vsmps1RequestCtrl
+ * 0xc0, Vsmps2RequestCtrl
+ */
+ REG_INIT(AB9540_REGUREQUESTCTRL1, 0x03, 0x03, 0xff),
+ /*
+ * 0x03, Vsmps3RequestCtrl
+ * 0x0c, VpllRequestCtrl
+ * 0x30, VanaRequestCtrl
+ * 0xc0, VextSupply1RequestCtrl
+ */
+ REG_INIT(AB9540_REGUREQUESTCTRL2, 0x03, 0x04, 0xff),
+ /*
+ * 0x03, VextSupply2RequestCtrl
+ * 0x0c, VextSupply3RequestCtrl
+ * 0x30, Vaux1RequestCtrl
+ * 0xc0, Vaux2RequestCtrl
+ */
+ REG_INIT(AB9540_REGUREQUESTCTRL3, 0x03, 0x05, 0xff),
+ /*
+ * 0x03, Vaux3RequestCtrl
+ * 0x04, SwHPReq
+ */
+ REG_INIT(AB9540_REGUREQUESTCTRL4, 0x03, 0x06, 0x07),
+ /*
+ * 0x01, Vsmps1SysClkReq1HPValid
+ * 0x02, Vsmps2SysClkReq1HPValid
+ * 0x04, Vsmps3SysClkReq1HPValid
+ * 0x08, VanaSysClkReq1HPValid
+ * 0x10, VpllSysClkReq1HPValid
+ * 0x20, Vaux1SysClkReq1HPValid
+ * 0x40, Vaux2SysClkReq1HPValid
+ * 0x80, Vaux3SysClkReq1HPValid
+ */
+ REG_INIT(AB9540_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff),
+ /*
+ * 0x01, VapeSysClkReq1HPValid
+ * 0x02, VarmSysClkReq1HPValid
+ * 0x04, VbbSysClkReq1HPValid
+ * 0x08, VmodSysClkReq1HPValid
+ * 0x10, VextSupply1SysClkReq1HPValid
+ * 0x20, VextSupply2SysClkReq1HPValid
+ * 0x40, VextSupply3SysClkReq1HPValid
+ */
+ REG_INIT(AB9540_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x7f),
+ /*
+ * 0x01, Vsmps1HwHPReq1Valid
+ * 0x02, Vsmps2HwHPReq1Valid
+ * 0x04, Vsmps3HwHPReq1Valid
+ * 0x08, VanaHwHPReq1Valid
+ * 0x10, VpllHwHPReq1Valid
+ * 0x20, Vaux1HwHPReq1Valid
+ * 0x40, Vaux2HwHPReq1Valid
+ * 0x80, Vaux3HwHPReq1Valid
+ */
+ REG_INIT(AB9540_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff),
+ /*
+ * 0x01, VextSupply1HwHPReq1Valid
+ * 0x02, VextSupply2HwHPReq1Valid
+ * 0x04, VextSupply3HwHPReq1Valid
+ * 0x08, VmodHwHPReq1Valid
+ */
+ REG_INIT(AB9540_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x0f),
+ /*
+ * 0x01, Vsmps1HwHPReq2Valid
+ * 0x02, Vsmps2HwHPReq2Valid
+ * 0x03, Vsmps3HwHPReq2Valid
+ * 0x08, VanaHwHPReq2Valid
+ * 0x10, VpllHwHPReq2Valid
+ * 0x20, Vaux1HwHPReq2Valid
+ * 0x40, Vaux2HwHPReq2Valid
+ * 0x80, Vaux3HwHPReq2Valid
+ */
+ REG_INIT(AB9540_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff),
+ /*
+ * 0x01, VextSupply1HwHPReq2Valid
+ * 0x02, VextSupply2HwHPReq2Valid
+ * 0x04, VextSupply3HwHPReq2Valid
+ * 0x08, VmodHwHPReq2Valid
+ */
+ REG_INIT(AB9540_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x0f),
+ /*
+ * 0x01, VapeSwHPReqValid
+ * 0x02, VarmSwHPReqValid
+ * 0x04, Vsmps1SwHPReqValid
+ * 0x08, Vsmps2SwHPReqValid
+ * 0x10, Vsmps3SwHPReqValid
+ * 0x20, VanaSwHPReqValid
+ * 0x40, VpllSwHPReqValid
+ * 0x80, Vaux1SwHPReqValid
+ */
+ REG_INIT(AB9540_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff),
+ /*
+ * 0x01, Vaux2SwHPReqValid
+ * 0x02, Vaux3SwHPReqValid
+ * 0x04, VextSupply1SwHPReqValid
+ * 0x08, VextSupply2SwHPReqValid
+ * 0x10, VextSupply3SwHPReqValid
+ * 0x20, VmodSwHPReqValid
+ */
+ REG_INIT(AB9540_REGUSWHPREQVALID2, 0x03, 0x0e, 0x3f),
+ /*
+ * 0x02, SysClkReq2Valid1
+ * ...
+ * 0x80, SysClkReq8Valid1
+ */
+ REG_INIT(AB9540_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0xfe),
+ /*
+ * 0x02, SysClkReq2Valid2
+ * ...
+ * 0x80, SysClkReq8Valid2
+ */
+ REG_INIT(AB9540_REGUSYSCLKREQVALID2, 0x03, 0x10, 0xfe),
+ /*
+ * 0x01, Vaux4SwHPReqValid
+ * 0x02, Vaux4HwHPReq2Valid
+ * 0x04, Vaux4HwHPReq1Valid
+ * 0x08, Vaux4SysClkReq1HPValid
+ */
+ REG_INIT(AB9540_REGUVAUX4REQVALID, 0x03, 0x11, 0x0f),
+ /*
+ * 0x02, VTVoutEna
+ * 0x04, Vintcore12Ena
+ * 0x38, Vintcore12Sel
+ * 0x40, Vintcore12LP
+ * 0x80, VTVoutLP
+ */
+ REG_INIT(AB9540_REGUMISC1, 0x03, 0x80, 0xfe),
+ /*
+ * 0x02, VaudioEna
+ * 0x04, VdmicEna
+ * 0x08, Vamic1Ena
+ * 0x10, Vamic2Ena
+ */
+ REG_INIT(AB9540_VAUDIOSUPPLY, 0x03, 0x83, 0x1e),
+ /*
+ * 0x01, Vamic1_dzout
+ * 0x02, Vamic2_dzout
+ */
+ REG_INIT(AB9540_REGUCTRL1VAMIC, 0x03, 0x84, 0x03),
+ /*
+ * 0x03, Vsmps1Regu
+ * 0x0c, Vsmps1SelCtrl
+ * 0x10, Vsmps1AutoMode
+ * 0x20, Vsmps1PWMMode
+ */
+ REG_INIT(AB9540_VSMPS1REGU, 0x04, 0x03, 0x3f),
+ /*
+ * 0x03, Vsmps2Regu
+ * 0x0c, Vsmps2SelCtrl
+ * 0x10, Vsmps2AutoMode
+ * 0x20, Vsmps2PWMMode
+ */
+ REG_INIT(AB9540_VSMPS2REGU, 0x04, 0x04, 0x3f),
+ /*
+ * 0x03, Vsmps3Regu
+ * 0x0c, Vsmps3SelCtrl
+ * NOTE! PRCMU register
+ */
+ REG_INIT(AB9540_VSMPS3REGU, 0x04, 0x05, 0x0f),
+ /*
+ * 0x03, VpllRegu
+ * 0x0c, VanaRegu
+ */
+ REG_INIT(AB9540_VPLLVANAREGU, 0x04, 0x06, 0x0f),
+ /*
+ * 0x03, VextSupply1Regu
+ * 0x0c, VextSupply2Regu
+ * 0x30, VextSupply3Regu
+ * 0x40, ExtSupply2Bypass
+ * 0x80, ExtSupply3Bypass
+ */
+ REG_INIT(AB9540_EXTSUPPLYREGU, 0x04, 0x08, 0xff),
+ /*
+ * 0x03, Vaux1Regu
+ * 0x0c, Vaux2Regu
+ */
+ REG_INIT(AB9540_VAUX12REGU, 0x04, 0x09, 0x0f),
+ /*
+ * 0x0c, Vrf1Regu
+ * 0x03, Vaux3Regu
+ */
+ REG_INIT(AB9540_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f),
+ /*
+ * 0x3f, Vsmps1Sel1
+ */
+ REG_INIT(AB9540_VSMPS1SEL1, 0x04, 0x13, 0x3f),
+ /*
+ * 0x3f, Vsmps1Sel2
+ */
+ REG_INIT(AB9540_VSMPS1SEL2, 0x04, 0x14, 0x3f),
+ /*
+ * 0x3f, Vsmps1Sel3
+ */
+ REG_INIT(AB9540_VSMPS1SEL3, 0x04, 0x15, 0x3f),
+ /*
+ * 0x3f, Vsmps2Sel1
+ */
+ REG_INIT(AB9540_VSMPS2SEL1, 0x04, 0x17, 0x3f),
+ /*
+ * 0x3f, Vsmps2Sel2
+ */
+ REG_INIT(AB9540_VSMPS2SEL2, 0x04, 0x18, 0x3f),
+ /*
+ * 0x3f, Vsmps2Sel3
+ */
+ REG_INIT(AB9540_VSMPS2SEL3, 0x04, 0x19, 0x3f),
+ /*
+ * 0x7f, Vsmps3Sel1
+ * NOTE! PRCMU register
+ */
+ REG_INIT(AB9540_VSMPS3SEL1, 0x04, 0x1b, 0x7f),
+ /*
+ * 0x7f, Vsmps3Sel2
+ * NOTE! PRCMU register
+ */
+ REG_INIT(AB9540_VSMPS3SEL2, 0x04, 0x1c, 0x7f),
+ /*
+ * 0x0f, Vaux1Sel
+ */
+ REG_INIT(AB9540_VAUX1SEL, 0x04, 0x1f, 0x0f),
+ /*
+ * 0x0f, Vaux2Sel
+ */
+ REG_INIT(AB9540_VAUX2SEL, 0x04, 0x20, 0x0f),
+ /*
+ * 0x07, Vaux3Sel
+ * 0x30, Vrf1Sel
+ */
+ REG_INIT(AB9540_VRF1VAUX3SEL, 0x04, 0x21, 0x37),
+ /*
+ * 0x01, VextSupply12LP
+ */
+ REG_INIT(AB9540_REGUCTRL2SPARE, 0x04, 0x22, 0x01),
+ /*
+ * 0x03, Vaux4RequestCtrl
+ */
+ REG_INIT(AB9540_VAUX4REQCTRL, 0x04, 0x2d, 0x03),
+ /*
+ * 0x03, Vaux4Regu
+ */
+ REG_INIT(AB9540_VAUX4REGU, 0x04, 0x2e, 0x03),
+ /*
+ * 0x08, Vaux4Sel
+ */
+ REG_INIT(AB9540_VAUX4SEL, 0x04, 0x2f, 0x0f),
+ /*
+ * 0x01, VpllDisch
+ * 0x02, Vrf1Disch
+ * 0x04, Vaux1Disch
+ * 0x08, Vaux2Disch
+ * 0x10, Vaux3Disch
+ * 0x20, Vintcore12Disch
+ * 0x40, VTVoutDisch
+ * 0x80, VaudioDisch
+ */
+ REG_INIT(AB9540_REGUCTRLDISCH, 0x04, 0x43, 0xff),
+ /*
+ * 0x01, VsimDisch
+ * 0x02, VanaDisch
+ * 0x04, VdmicPullDownEna
+ * 0x08, VpllPullDownEna
+ * 0x10, VdmicDisch
+ */
+ REG_INIT(AB9540_REGUCTRLDISCH2, 0x04, 0x44, 0x1f),
+ /*
+ * 0x01, Vaux4Disch
+ */
+ REG_INIT(AB9540_REGUCTRLDISCH3, 0x04, 0x48, 0x01),
+};
+
static int ab8500_regulator_init_registers(struct platform_device *pdev,
struct ab8500_reg_init *reg_init,
int id, int mask, int value)
@@ -799,6 +1332,7 @@ static int ab8500_regulator_register(struct platform_device *pdev,
struct ab8500_regulator_info *regulator_info,
int id, struct device_node *np)
{
+ struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_regulator_info *info = NULL;
struct regulator_config config = { };
int err;
@@ -813,7 +1347,7 @@ static int ab8500_regulator_register(struct platform_device *pdev,
config.of_node = np;

/* fix for hardware before ab8500v2.0 */
- if (abx500_get_chip_id(info->dev) < 0x20) {
+ if (is_ab8500_1p1_or_earlier(ab8500)) {
if (info->desc.id == AB8500_LDO_AUX3) {
info->desc.n_voltages =
ARRAY_SIZE(ldo_vauxn_voltages);
@@ -852,6 +1386,20 @@ static struct of_regulator_match ab8500_regulator_match[] = {
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, },
};

+static struct of_regulator_match ab9540_regulator_match[] = {
+ { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB9540_LDO_AUX1, },
+ { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB9540_LDO_AUX2, },
+ { .name = "ab8500_ldo_aux3", .driver_data = (void *) AB9540_LDO_AUX3, },
+ { .name = "ab8500_ldo_aux4", .driver_data = (void *) AB9540_LDO_AUX4, },
+ { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB9540_LDO_INTCORE, },
+ { .name = "ab8500_ldo_tvout", .driver_data = (void *) AB9540_LDO_TVOUT, },
+ { .name = "ab8500_ldo_audio", .driver_data = (void *) AB9540_LDO_AUDIO, },
+ { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB9540_LDO_ANAMIC1, },
+ { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB9540_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_dmic", .driver_data = (void *) AB9540_LDO_DMIC, },
+ { .name = "ab8500_ldo_ana", .driver_data = (void *) AB9540_LDO_ANA, },
+};
+
static int
ab8500_regulator_of_probe(struct platform_device *pdev,
struct ab8500_regulator_info *regulator_info,
@@ -885,12 +1433,21 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
struct ab8500_reg_init *reg_init;
int reg_init_size;

- regulator_info = ab8500_regulator_info;
- regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
- reg_init = ab8500_reg_init;
- reg_init_size = AB8500_NUM_REGULATOR_REGISTERS;
- match = ab8500_regulator_match;
- match_size = ARRAY_SIZE(ab8500_regulator_match)
+ if (is_ab9540(ab8500)) {
+ regulator_info = ab9540_regulator_info;
+ regulator_info_size = ARRAY_SIZE(ab9540_regulator_info);
+ reg_init = ab9540_reg_init;
+ reg_init_size = AB9540_NUM_REGULATOR_REGISTERS;
+ match = ab9540_regulator_match;
+ match_size = ARRAY_SIZE(ab9540_regulator_match)
+ } else {
+ regulator_info = ab8500_regulator_info;
+ regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
+ reg_init = ab8500_reg_init;
+ reg_init_size = AB8500_NUM_REGULATOR_REGISTERS;
+ match = ab8500_regulator_match;
+ match_size = ARRAY_SIZE(ab8500_regulator_match)
+ }

if (np) {
err = of_regulator_match(&pdev->dev, np, match, match_size);
@@ -968,11 +1525,18 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
static int ab8500_regulator_remove(struct platform_device *pdev)
{
int i, err;
+ struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_regulator_info *regulator_info;
int regulator_info_size;

- regulator_info = ab8500_regulator_info;
- regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
+
+ if (is_ab9540(ab8500)) {
+ regulator_info = ab9540_regulator_info;
+ regulator_info_size = ARRAY_SIZE(ab9540_regulator_info);
+ } else {
+ regulator_info = ab8500_regulator_info;
+ regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
+ }

for (i = 0; i < regulator_info_size; i++) {
struct ab8500_regulator_info *info = NULL;
--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/