Re: Linux 3.8.4

From: Greg KH
Date: Wed Mar 20 2013 - 16:15:12 EST

Next message: CORREO: "cuenta cancelada"
Previous message: Sven Joachim: "Re: [ 12/75] USB: EHCI: work around silicon bug in Intels EHCI controllers"
In reply to: Greg KH: "Linux 3.8.4"
Next in thread: Sebastian Gottschall: "Re: Linux 3.8.4"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
index 1e1145c..8f01cb1 100644
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -11,6 +11,9 @@ Required properties:
- "nvidia,tegra20-uart"
- "nxp,lpc3220-uart"
- "ibm,qpace-nwp-serial"
+ - "altr,16550-FIFO32"
+ - "altr,16550-FIFO64"
+ - "altr,16550-FIFO128"
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
diff --git a/Makefile b/Makefile
index 8c49fc9b..e20f162 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 8
-SUBLEVEL = 3
+SUBLEVEL = 4
EXTRAVERSION =
NAME = Unicycling Gorilla

diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 191d37c..1478294 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -176,6 +176,7 @@ static struct w1_gpio_platform_data w1_gpio_pdata = {
/* If you choose to use a pin other than PB16 it needs to be 3.3V */
.pin = AT91_PIN_PB16,
.is_open_drain = 1,
+ .ext_pullup_enable_pin = -EINVAL,
};

static struct platform_device w1_device = {
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 48a962b..58a6758 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -188,6 +188,7 @@ static struct spi_board_info portuxg20_spi_devices[] = {
static struct w1_gpio_platform_data w1_gpio_pdata = {
.pin = AT91_PIN_PA29,
.is_open_drain = 1,
+ .ext_pullup_enable_pin = -EINVAL,
};

static struct platform_device w1_device = {
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index a685e97..45b7c71 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -743,6 +743,9 @@ EXPORT_SYMBOL(edma_free_channel);
*/
int edma_alloc_slot(unsigned ctlr, int slot)
{
+ if (!edma_cc[ctlr])
+ return -EINVAL;
+
if (slot >= 0)
slot = EDMA_CHAN_SLOT(slot);

diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 2798f43..1dddc1b 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -163,6 +163,7 @@ static struct platform_device vulcan_max6369 = {

static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
.pin = 14,
+ .ext_pullup_enable_pin = -EINVAL,
};

static struct platform_device vulcan_w1_gpio = {
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index de4fd2b..e714ead 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -41,16 +41,12 @@ static void __init kirkwood_legacy_clk_init(void)

struct device_node *np = of_find_compatible_node(
NULL, NULL, "marvell,kirkwood-gating-clock");
-
struct of_phandle_args clkspec;
+ struct clk *clk;

clkspec.np = np;
clkspec.args_count = 1;

- clkspec.args[0] = CGC_BIT_GE0;
- orion_clkdev_add(NULL, "mv643xx_eth_port.0",
- of_clk_get_from_provider(&clkspec));
-
clkspec.args[0] = CGC_BIT_PEX0;
orion_clkdev_add("0", "pcie",
of_clk_get_from_provider(&clkspec));
@@ -63,14 +59,24 @@ static void __init kirkwood_legacy_clk_init(void)
orion_clkdev_add("1", "pcie",
of_clk_get_from_provider(&clkspec));

- clkspec.args[0] = CGC_BIT_GE1;
- orion_clkdev_add(NULL, "mv643xx_eth_port.1",
- of_clk_get_from_provider(&clkspec));
-
clkspec.args[0] = CGC_BIT_SDIO;
orion_clkdev_add(NULL, "mvsdio",
of_clk_get_from_provider(&clkspec));

+ /*
+ * The ethernet interfaces forget the MAC address assigned by
+ * u-boot if the clocks are turned off. Until proper DT support
+ * is available we always enable them for now.
+ */
+ clkspec.args[0] = CGC_BIT_GE0;
+ clk = of_clk_get_from_provider(&clkspec);
+ orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
+ clk_prepare_enable(clk);
+
+ clkspec.args[0] = CGC_BIT_GE1;
+ clk = of_clk_get_from_provider(&clkspec);
+ orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
+ clk_prepare_enable(clk);
}

static void __init kirkwood_of_clk_init(void)
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 25b08bfa..6283fcb 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -505,6 +505,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = {
.pin = GPIO_ONE_WIRE,
.is_open_drain = 0,
.enable_external_pullup = w1_enable_external_pullup,
+ .ext_pullup_enable_pin = -EINVAL,
};

struct platform_device raumfeld_w1_gpio_device = {
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 2fdb47a..b59e06f 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -343,17 +343,16 @@ extern void slb_set_size(u16 size);
/*
* VSID allocation (256MB segment)
*
- * We first generate a 38-bit "proto-VSID". For kernel addresses this
- * is equal to the ESID | 1 << 37, for user addresses it is:
- * (context << USER_ESID_BITS) | (esid & ((1U << USER_ESID_BITS) - 1)
+ * We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated
+ * from mmu context id and effective segment id of the address.
*
- * This splits the proto-VSID into the below range
- * 0 - (2^(CONTEXT_BITS + USER_ESID_BITS) - 1) : User proto-VSID range
- * 2^(CONTEXT_BITS + USER_ESID_BITS) - 2^(VSID_BITS) : Kernel proto-VSID range
- *
- * We also have CONTEXT_BITS + USER_ESID_BITS = VSID_BITS - 1
- * That is, we assign half of the space to user processes and half
- * to the kernel.
+ * For user processes max context id is limited to ((1ul << 19) - 5)
+ * for kernel space, we use the top 4 context ids to map address as below
+ * NOTE: each context only support 64TB now.
+ * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ]
*
* The proto-VSIDs are then scrambled into real VSIDs with the
* multiplicative hash:
@@ -363,41 +362,49 @@ extern void slb_set_size(u16 size);
* VSID_MULTIPLIER is prime, so in particular it is
* co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
* Because the modulus is 2^n-1 we can compute it efficiently without
- * a divide or extra multiply (see below).
- *
- * This scheme has several advantages over older methods:
- *
- * - We have VSIDs allocated for every kernel address
- * (i.e. everything above 0xC000000000000000), except the very top
- * segment, which simplifies several things.
+ * a divide or extra multiply (see below). The scramble function gives
+ * robust scattering in the hash table (at least based on some initial
+ * results).
*
- * - We allow for USER_ESID_BITS significant bits of ESID and
- * CONTEXT_BITS bits of context for user addresses.
- * i.e. 64T (46 bits) of address space for up to half a million contexts.
+ * We also consider VSID 0 special. We use VSID 0 for slb entries mapping
+ * bad address. This enables us to consolidate bad address handling in
+ * hash_page.
*
- * - The scramble function gives robust scattering in the hash
- * table (at least based on some initial results). The previous
- * method was more susceptible to pathological cases giving excessive
- * hash collisions.
+ * We also need to avoid the last segment of the last context, because that
+ * would give a protovsid of 0x1fffffffff. That will result in a VSID 0
+ * because of the modulo operation in vsid scramble. But the vmemmap
+ * (which is what uses region 0xf) will never be close to 64TB in size
+ * (it's 56 bytes per page of system memory).
*/

+#define CONTEXT_BITS 19
+#define ESID_BITS 18
+#define ESID_BITS_1T 6
+
+/*
+ * 256MB segment
+ * The proto-VSID space has 2^(CONTEX_BITS + ESID_BITS) - 1 segments
+ * available for user + kernel mapping. The top 4 contexts are used for
+ * kernel mapping. Each segment contains 2^28 bytes. Each
+ * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
+ * (19 == 37 + 28 - 46).
+ */
+#define MAX_USER_CONTEXT ((ASM_CONST(1) << CONTEXT_BITS) - 5)
+
/*
* This should be computed such that protovosid * vsid_mulitplier
* doesn't overflow 64 bits. It should also be co-prime to vsid_modulus
*/
#define VSID_MULTIPLIER_256M ASM_CONST(12538073) /* 24-bit prime */
-#define VSID_BITS_256M 38
+#define VSID_BITS_256M (CONTEXT_BITS + ESID_BITS)
#define VSID_MODULUS_256M ((1UL<<VSID_BITS_256M)-1)

#define VSID_MULTIPLIER_1T ASM_CONST(12538073) /* 24-bit prime */
-#define VSID_BITS_1T 26
+#define VSID_BITS_1T (CONTEXT_BITS + ESID_BITS_1T)
#define VSID_MODULUS_1T ((1UL<<VSID_BITS_1T)-1)

-#define CONTEXT_BITS 19
-#define USER_ESID_BITS 18
-#define USER_ESID_BITS_1T 6

-#define USER_VSID_RANGE (1UL << (USER_ESID_BITS + SID_SHIFT))
+#define USER_VSID_RANGE (1UL << (ESID_BITS + SID_SHIFT))

/*
* This macro generates asm code to compute the VSID scramble
@@ -421,7 +428,8 @@ extern void slb_set_size(u16 size);
srdi rx,rt,VSID_BITS_##size; \
clrldi rt,rt,(64-VSID_BITS_##size); \
add rt,rt,rx; /* add high and low bits */ \
- /* Now, r3 == VSID (mod 2^36-1), and lies between 0 and \
+ /* NOTE: explanation based on VSID_BITS_##size = 36 \
+ * Now, r3 == VSID (mod 2^36-1), and lies between 0 and \
* 2^36-1+2^28-1. That in particular means that if r3 >= \
* 2^36-1, then r3+1 has the 2^36 bit set. So, if r3+1 has \
* the bit clear, r3 already has the answer we want, if it \
@@ -513,34 +521,6 @@ typedef struct {
})
#endif /* 1 */

-/*
- * This is only valid for addresses >= PAGE_OFFSET
- * The proto-VSID space is divided into two class
- * User: 0 to 2^(CONTEXT_BITS + USER_ESID_BITS) -1
- * kernel: 2^(CONTEXT_BITS + USER_ESID_BITS) to 2^(VSID_BITS) - 1
- *
- * With KERNEL_START at 0xc000000000000000, the proto vsid for
- * the kernel ends up with 0xc00000000 (36 bits). With 64TB
- * support we need to have kernel proto-VSID in the
- * [2^37 to 2^38 - 1] range due to the increased USER_ESID_BITS.
- */
-static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
-{
- unsigned long proto_vsid;
- /*
- * We need to make sure proto_vsid for the kernel is
- * >= 2^(CONTEXT_BITS + USER_ESID_BITS[_1T])
- */
- if (ssize == MMU_SEGSIZE_256M) {
- proto_vsid = ea >> SID_SHIFT;
- proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS));
- return vsid_scramble(proto_vsid, 256M);
- }
- proto_vsid = ea >> SID_SHIFT_1T;
- proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS_1T));
- return vsid_scramble(proto_vsid, 1T);
-}
-
/* Returns the segment size indicator for a user address */
static inline int user_segment_size(unsigned long addr)
{
@@ -550,17 +530,41 @@ static inline int user_segment_size(unsigned long addr)
return MMU_SEGSIZE_256M;
}

-/* This is only valid for user addresses (which are below 2^44) */
static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
int ssize)
{
+ /*
+ * Bad address. We return VSID 0 for that
+ */
+ if ((ea & ~REGION_MASK) >= PGTABLE_RANGE)
+ return 0;
+
if (ssize == MMU_SEGSIZE_256M)
- return vsid_scramble((context << USER_ESID_BITS)
+ return vsid_scramble((context << ESID_BITS)
| (ea >> SID_SHIFT), 256M);
- return vsid_scramble((context << USER_ESID_BITS_1T)
+ return vsid_scramble((context << ESID_BITS_1T)
| (ea >> SID_SHIFT_1T), 1T);
}

+/*
+ * This is only valid for addresses >= PAGE_OFFSET
+ *
+ * For kernel space, we use the top 4 context ids to map address as below
+ * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ]
+ */
+static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
+{
+ unsigned long context;
+
+ /*
+ * kernel take the top 4 context from the available range
+ */
+ context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1;
+ return get_vsid(context, ea, ssize);
+}
#endif /* __ASSEMBLY__ */

#endif /* _ASM_POWERPC_MMU_HASH64_H_ */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 75a3d71..19599ef 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -275,7 +275,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_PPC970,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 4665e82..3684cbd 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1268,20 +1268,36 @@ do_ste_alloc:
_GLOBAL(do_stab_bolted)
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
+ mfspr r11,SPRN_DAR /* ea */

+ /*
+ * check for bad kernel/user address
+ * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+ */
+ rldicr. r9,r11,4,(63 - 46 - 4)
+ li r9,0 /* VSID = 0 for bad address */
+ bne- 0f
+
+ /*
+ * Calculate VSID:
+ * This is the kernel vsid, we take the top for context from
+ * the range. context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * Here we know that (ea >> 60) == 0xc
+ */
+ lis r9,(MAX_USER_CONTEXT + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT + 1)@l
+
+ srdi r10,r11,SID_SHIFT
+ rldimi r10,r9,ESID_BITS,0 /* proto vsid */
+ ASM_VSID_SCRAMBLE(r10, r9, 256M)
+ rldic r9,r10,12,16 /* r9 = vsid << 12 */
+
+0:
/* Hash to the primary group */
ld r10,PACASTABVIRT(r13)
- mfspr r11,SPRN_DAR
- srdi r11,r11,28
+ srdi r11,r11,SID_SHIFT
rldimi r10,r11,7,52 /* r10 = first ste of the group */

- /* Calculate VSID */
- /* This is a kernel address, so protovsid = ESID | 1 << 37 */
- li r9,0x1
- rldimi r11,r9,(CONTEXT_BITS + USER_ESID_BITS),0
- ASM_VSID_SCRAMBLE(r11, r9, 256M)
- rldic r9,r11,12,16 /* r9 = vsid << 12 */
-
/* Search the primary group for a free entry */
1: ld r11,0(r10) /* Test valid bit of the current ste */
andi. r11,r11,0x80
diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index ead58e3..5d7d29a 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -326,8 +326,8 @@ int kvmppc_mmu_init(struct kvm_vcpu *vcpu)
vcpu3s->context_id[0] = err;

vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1)
- << USER_ESID_BITS) - 1;
- vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
+ << ESID_BITS) - 1;
+ vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << ESID_BITS;
vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first;

kvmppc_mmu_hpte_init(vcpu);
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 3a292be..004630b 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -194,6 +194,11 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long vpn = hpt_vpn(vaddr, vsid, ssize);
unsigned long tprot = prot;

+ /*
+ * If we hit a bad address return error.
+ */
+ if (!vsid)
+ return -1;
/* Make kernel text executable */
if (overlaps_kernel_text(vaddr, vaddr + step))
tprot &= ~HPTE_R_N;
@@ -758,6 +763,8 @@ void __init early_init_mmu(void)
/* Initialize stab / SLB management */
if (mmu_has_feature(MMU_FTR_SLB))
slb_initialize();
+ else
+ stab_initialize(get_paca()->stab_real);
}

#ifdef CONFIG_SMP
@@ -921,11 +928,6 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n",
ea, access, trap);

- if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) {
- DBG_LOW(" out of pgtable range !\n");
- return 1;
- }
-
/* Get region & vsid */
switch (REGION_ID(ea)) {
case USER_REGION_ID:
@@ -956,6 +958,11 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
}
DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid);

+ /* Bad address. */
+ if (!vsid) {
+ DBG_LOW("Bad address!\n");
+ return 1;
+ }
/* Get pgdir */
pgdir = mm->pgd;
if (pgdir == NULL)
@@ -1125,6 +1132,8 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
/* Get VSID */
ssize = user_segment_size(ea);
vsid = get_vsid(mm->context.id, ea, ssize);
+ if (!vsid)
+ return;

/* Hash doesn't like irqs */
local_irq_save(flags);
@@ -1217,6 +1226,9 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi)
hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize);
hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);

+ /* Don't create HPTE entries for bad address */
+ if (!vsid)
+ return;
ret = ppc_md.hpte_insert(hpteg, vpn, __pa(vaddr),
mode, HPTE_V_BOLTED,
mmu_linear_psize, mmu_kernel_ssize);
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index 40bc5b0..d1d1b92 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -29,15 +29,6 @@
static DEFINE_SPINLOCK(mmu_context_lock);
static DEFINE_IDA(mmu_context_ida);

-/*
- * 256MB segment
- * The proto-VSID space has 2^(CONTEX_BITS + USER_ESID_BITS) - 1 segments
- * available for user mappings. Each segment contains 2^28 bytes. Each
- * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
- * (19 == 37 + 28 - 46).
- */
-#define MAX_CONTEXT ((1UL << CONTEXT_BITS) - 1)
-
int __init_new_context(void)
{
int index;
@@ -56,7 +47,7 @@ again:
else if (err)
return err;

- if (index > MAX_CONTEXT) {
+ if (index > MAX_USER_CONTEXT) {
spin_lock(&mmu_context_lock);
ida_remove(&mmu_context_ida, index);
spin_unlock(&mmu_context_lock);
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index e212a27..654258f 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -61,7 +61,7 @@
#endif

#ifdef CONFIG_PPC_STD_MMU_64
-#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
+#if TASK_SIZE_USER64 > (1UL << (ESID_BITS + SID_SHIFT))
#error TASK_SIZE_USER64 exceeds user VSID range
#endif
#endif
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 1a16ca2..17aa6df 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -31,10 +31,15 @@
* No other registers are examined or changed.
*/
_GLOBAL(slb_allocate_realmode)
- /* r3 = faulting address */
+ /*
+ * check for bad kernel/user address
+ * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+ */
+ rldicr. r9,r3,4,(63 - 46 - 4)
+ bne- 8f

srdi r9,r3,60 /* get region */
- srdi r10,r3,28 /* get esid */
+ srdi r10,r3,SID_SHIFT /* get esid */
cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */

/* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
@@ -56,12 +61,14 @@ _GLOBAL(slb_allocate_realmode)
*/
_GLOBAL(slb_miss_kernel_load_linear)
li r11,0
- li r9,0x1
/*
- * for 1T we shift 12 bits more. slb_finish_load_1T will do
- * the necessary adjustment
+ * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * r9 = region id.
*/
- rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+ addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
+
BEGIN_FTR_SECTION
b slb_finish_load
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
@@ -91,24 +98,19 @@ _GLOBAL(slb_miss_kernel_load_vmemmap)
_GLOBAL(slb_miss_kernel_load_io)
li r11,0
6:
- li r9,0x1
/*
- * for 1T we shift 12 bits more. slb_finish_load_1T will do
- * the necessary adjustment
+ * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * r9 = region id.
*/
- rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+ addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
BEGIN_FTR_SECTION
b slb_finish_load
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
b slb_finish_load_1T

-0: /* user address: proto-VSID = context << 15 | ESID. First check
- * if the address is within the boundaries of the user region
- */
- srdi. r9,r10,USER_ESID_BITS
- bne- 8f /* invalid ea bits set */
-
-
+0:
/* when using slices, we extract the psize off the slice bitmaps
* and then we need to get the sllp encoding off the mmu_psize_defs
* array.
@@ -164,15 +166,13 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
ld r9,PACACONTEXTID(r13)
BEGIN_FTR_SECTION
cmpldi r10,0x1000
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
- rldimi r10,r9,USER_ESID_BITS,0
-BEGIN_FTR_SECTION
bge slb_finish_load_1T
END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
b slb_finish_load

8: /* invalid EA */
li r10,0 /* BAD_VSID */
+ li r9,0 /* BAD_VSID */
li r11,SLB_VSID_USER /* flags don't much matter */
b slb_finish_load

@@ -221,8 +221,6 @@ _GLOBAL(slb_allocate_user)

/* get context to calculate proto-VSID */
ld r9,PACACONTEXTID(r13)
- rldimi r10,r9,USER_ESID_BITS,0
-
/* fall through slb_finish_load */

#endif /* __DISABLED__ */
@@ -231,9 +229,10 @@ _GLOBAL(slb_allocate_user)
/*
* Finish loading of an SLB entry and return
*
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
+ * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
*/
slb_finish_load:
+ rldimi r10,r9,ESID_BITS,0
ASM_VSID_SCRAMBLE(r10,r9,256M)
/*
* bits above VSID_BITS_256M need to be ignored from r10
@@ -298,10 +297,11 @@ _GLOBAL(slb_compare_rr_to_size)
/*
* Finish loading of a 1T SLB entry (for the kernel linear mapping) and return.
*
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9
+ * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9
*/
slb_finish_load_1T:
- srdi r10,r10,40-28 /* get 1T ESID */
+ srdi r10,r10,(SID_SHIFT_1T - SID_SHIFT) /* get 1T ESID */
+ rldimi r10,r9,ESID_BITS_1T,0
ASM_VSID_SCRAMBLE(r10,r9,1T)
/*
* bits above VSID_BITS_1T need to be ignored from r10
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 0d82ef5..023ec8a 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -82,11 +82,11 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
if (!is_kernel_addr(addr)) {
ssize = user_segment_size(addr);
vsid = get_vsid(mm->context.id, addr, ssize);
- WARN_ON(vsid == 0);
} else {
vsid = get_kernel_vsid(addr, mmu_kernel_ssize);
ssize = mmu_kernel_ssize;
}
+ WARN_ON(vsid == 0);
vpn = hpt_vpn(addr, vsid, ssize);
rpte = __real_pte(__pte(pte), ptep);

diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h
index 1d8fe2b..6b32af3 100644
--- a/arch/s390/include/asm/tlbflush.h
+++ b/arch/s390/include/asm/tlbflush.h
@@ -74,8 +74,6 @@ static inline void __tlb_flush_idte(unsigned long asce)

static inline void __tlb_flush_mm(struct mm_struct * mm)
{
- if (unlikely(cpumask_empty(mm_cpumask(mm))))
- return;
/*
* If the machine has IDTE we prefer to do a per mm flush
* on all cpus instead of doing a local flush if the mm
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 5502285..94feff7 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -636,7 +636,8 @@ ENTRY(mcck_int_handler)
UPDATE_VTIME %r14,%r15,__LC_MCCK_ENTER_TIMER
mcck_skip:
SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+32,__LC_PANIC_STACK,PAGE_SHIFT
- mvc __PT_R0(64,%r11),__LC_GPREGS_SAVE_AREA
+ stm %r0,%r7,__PT_R0(%r11)
+ mvc __PT_R8(32,%r11),__LC_GPREGS_SAVE_AREA+32
stm %r8,%r9,__PT_PSW(%r11)
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
l %r1,BASED(.Ldo_machine_check)
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 6d34e0c..082b845 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -678,8 +678,9 @@ ENTRY(mcck_int_handler)
UPDATE_VTIME %r14,__LC_MCCK_ENTER_TIMER
LAST_BREAK %r14
mcck_skip:
- lghi %r14,__LC_GPREGS_SAVE_AREA
- mvc __PT_R0(128,%r11),0(%r14)
+ lghi %r14,__LC_GPREGS_SAVE_AREA+64
+ stmg %r0,%r7,__PT_R0(%r11)
+ mvc __PT_R8(64,%r11),0(%r14)
stmg %r8,%r9,__PT_PSW(%r11)
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 826054a..b05a575 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -729,3 +729,13 @@ void intel_ds_init(void)
}
}
}
+
+void perf_restore_debug_store(void)
+{
+ struct debug_store *ds = __this_cpu_read(cpu_hw_events.ds);
+
+ if (!x86_pmu.bts && !x86_pmu.pebs)
+ return;
+
+ wrmsrl(MSR_IA32_DS_AREA, (unsigned long)ds);
+}
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 120cee1..3c68768 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -11,6 +11,7 @@
#include <linux/suspend.h>
#include <linux/export.h>
#include <linux/smp.h>
+#include <linux/perf_event.h>

#include <asm/pgtable.h>
#include <asm/proto.h>
@@ -228,6 +229,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
do_fpu_end();
x86_platform.restore_sched_clock_state();
mtrr_bp_restore();
+ perf_restore_debug_store();
}

/* Needed by apm.c */
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index ae12512..8bc6d39 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1285,11 +1285,9 @@ static int loop_set_capacity(struct loop_device *lo, struct block_device *bdev)
/* the width of sector_t may be narrow for bit-shift */
sz = sec;
sz <<= 9;
- mutex_lock(&bdev->bd_mutex);
bd_set_size(bdev, sz);
/* let user-space know about the new size */
kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE);
- mutex_unlock(&bdev->bd_mutex);

out:
return err;
@@ -1858,11 +1856,15 @@ static int __init loop_init(void)
max_part = (1UL << part_shift) - 1;
}

- if ((1UL << part_shift) > DISK_MAX_PARTS)
- return -EINVAL;
+ if ((1UL << part_shift) > DISK_MAX_PARTS) {
+ err = -EINVAL;
+ goto misc_out;
+ }

- if (max_loop > 1UL << (MINORBITS - part_shift))
- return -EINVAL;
+ if (max_loop > 1UL << (MINORBITS - part_shift)) {
+ err = -EINVAL;
+ goto misc_out;
+ }

/*
* If max_loop is specified, create that many devices upfront.
@@ -1880,8 +1882,10 @@ static int __init loop_init(void)
range = 1UL << MINORBITS;
}

- if (register_blkdev(LOOP_MAJOR, "loop"))
- return -EIO;
+ if (register_blkdev(LOOP_MAJOR, "loop")) {
+ err = -EIO;
+ goto misc_out;
+ }

blk_register_region(MKDEV(LOOP_MAJOR, 0), range,
THIS_MODULE, loop_probe, NULL, NULL);
@@ -1894,6 +1898,10 @@ static int __init loop_init(void)

printk(KERN_INFO "loop: module loaded\n");
return 0;
+
+misc_out:
+ misc_deregister(&loop_misc);
+ return err;
}

static int loop_exit_cb(int id, void *ptr, void *data)
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index b65c103..1acc4e0 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -92,14 +92,22 @@ static int probe_common(struct virtio_device *vdev)
{
int err;

+ if (vq) {
+ /* We only support one device for now */
+ return -EBUSY;
+ }
/* We expect a single virtqueue. */
vq = virtio_find_single_vq(vdev, random_recv_done, "input");
- if (IS_ERR(vq))
- return PTR_ERR(vq);
+ if (IS_ERR(vq)) {
+ err = PTR_ERR(vq);
+ vq = NULL;
+ return err;
+ }

err = hwrng_register(&virtio_hwrng);
if (err) {
vdev->config->del_vqs(vdev);
+ vq = NULL;
return err;
}

@@ -112,6 +120,7 @@ static void remove_common(struct virtio_device *vdev)
busy = false;
hwrng_unregister(&virtio_hwrng);
vdev->config->del_vqs(vdev);
+ vq = NULL;
}

static int virtrng_probe(struct virtio_device *vdev)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 5206f24..99daa89 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1297,21 +1297,19 @@ static int i915_load_modeset_init(struct drm_device *dev)
if (ret)
goto cleanup_vga_switcheroo;

- ret = drm_irq_install(dev);
- if (ret)
- goto cleanup_gem_stolen;
-
- /* Important: The output setup functions called by modeset_init need
- * working irqs for e.g. gmbus and dp aux transfers. */
intel_modeset_init(dev);

ret = i915_gem_init(dev);
if (ret)
- goto cleanup_irq;
+ goto cleanup_gem_stolen;
+
+ intel_modeset_gem_init(dev);

INIT_WORK(&dev_priv->console_resume_work, intel_console_resume);

- intel_modeset_gem_init(dev);
+ ret = drm_irq_install(dev);
+ if (ret)
+ goto cleanup_gem;

/* Always safe in the mode setting case. */
/* FIXME: do pre/post-mode set stuff in core KMS code */
@@ -1319,10 +1317,7 @@ static int i915_load_modeset_init(struct drm_device *dev)

ret = intel_fbdev_init(dev);
if (ret)
- goto cleanup_gem;
-
- /* Only enable hotplug handling once the fbdev is fully set up. */
- dev_priv->enable_hotplug_processing = true;
+ goto cleanup_irq;

drm_kms_helper_poll_init(dev);

@@ -1331,13 +1326,13 @@ static int i915_load_modeset_init(struct drm_device *dev)

return 0;

+cleanup_irq:
+ drm_irq_uninstall(dev);
cleanup_gem:
mutex_lock(&dev->struct_mutex);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
i915_gem_cleanup_aliasing_ppgtt(dev);
-cleanup_irq:
- drm_irq_uninstall(dev);
cleanup_gem_stolen:
i915_gem_cleanup_stolen(dev);
cleanup_vga_switcheroo:
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index fb6454c..79f5fc5 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -486,7 +486,6 @@ static int i915_drm_freeze(struct drm_device *dev)
intel_modeset_disable(dev);

drm_irq_uninstall(dev);
- dev_priv->enable_hotplug_processing = false;
}

i915_save_state(dev);
@@ -563,19 +562,9 @@ static int __i915_drm_thaw(struct drm_device *dev)
error = i915_gem_init_hw(dev);
mutex_unlock(&dev->struct_mutex);

- /* We need working interrupts for modeset enabling ... */
- drm_irq_install(dev);
-
intel_modeset_init_hw(dev);
intel_modeset_setup_hw_state(dev, false);
-
- /*
- * ... but also need to make sure that hotplug processing
- * doesn't cause havoc. Like in the driver load code we don't
- * bother with the tiny race here where we might loose hotplug
- * notifications.
- * */
- dev_priv->enable_hotplug_processing = true;
+ drm_irq_install(dev);
}

intel_opregion_init(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 66ad64f..7339a4b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -672,7 +672,6 @@ typedef struct drm_i915_private {

u32 hotplug_supported_mask;
struct work_struct hotplug_work;
- bool enable_hotplug_processing;

int num_pipe;
int num_pch_pll;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 3c00403..fe84338 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -287,10 +287,6 @@ static void i915_hotplug_work_func(struct work_struct *work)
struct drm_mode_config *mode_config = &dev->mode_config;
struct intel_encoder *encoder;

- /* HPD irq before everything is fully set up. */
- if (!dev_priv->enable_hotplug_processing)
- return;
-
mutex_lock(&mode_config->mutex);
DRM_DEBUG_KMS("running encoder hotplug functions\n");

diff --git a/drivers/hwmon/lineage-pem.c b/drivers/hwmon/lineage-pem.c
index 41df29f..ebbb9f4 100644
--- a/drivers/hwmon/lineage-pem.c
+++ b/drivers/hwmon/lineage-pem.c
@@ -422,6 +422,7 @@ static struct attribute *pem_input_attributes[] = {
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_curr1_input.dev_attr.attr,
&sensor_dev_attr_power1_input.dev_attr.attr,
+ NULL
};

static const struct attribute_group pem_input_group = {
@@ -432,6 +433,7 @@ static struct attribute *pem_fan_attributes[] = {
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan3_input.dev_attr.attr,
+ NULL
};

static const struct attribute_group pem_fan_group = {
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
index a58de38..6d61307 100644
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -59,7 +59,7 @@ enum chips { ltc2978, ltc3880 };
struct ltc2978_data {
enum chips id;
int vin_min, vin_max;
- int temp_min, temp_max;
+ int temp_min, temp_max[2];
int vout_min[8], vout_max[8];
int iout_max[2];
int temp2_max;
@@ -113,9 +113,10 @@ static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
ret = pmbus_read_word_data(client, page,
LTC2978_MFR_TEMPERATURE_PEAK);
if (ret >= 0) {
- if (lin11_to_val(ret) > lin11_to_val(data->temp_max))
- data->temp_max = ret;
- ret = data->temp_max;
+ if (lin11_to_val(ret)
+ > lin11_to_val(data->temp_max[page]))
+ data->temp_max[page] = ret;
+ ret = data->temp_max[page];
}
break;
case PMBUS_VIRT_RESET_VOUT_HISTORY:
@@ -266,7 +267,7 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page,
break;
case PMBUS_VIRT_RESET_TEMP_HISTORY:
data->temp_min = 0x7bff;
- data->temp_max = 0x7c00;
+ data->temp_max[page] = 0x7c00;
ret = ltc2978_clear_peaks(client, page, data->id);
break;
default:
@@ -323,7 +324,8 @@ static int ltc2978_probe(struct i2c_client *client,
data->vin_min = 0x7bff;
data->vin_max = 0x7c00;
data->temp_min = 0x7bff;
- data->temp_max = 0x7c00;
+ for (i = 0; i < ARRAY_SIZE(data->temp_max); i++)
+ data->temp_max[i] = 0x7c00;
data->temp2_max = 0x7c00;

switch (data->id) {
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 3766682..db04f53 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1527,6 +1527,14 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
oobreadlen -= toread;
}
}
+
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
} else {
memcpy(buf, chip->buffers->databuf + col, bytes);
buf += bytes;
@@ -1791,6 +1799,14 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);

+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
+
readlen -= len;
if (!readlen)
break;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index e3aa274..9c61238 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -22,49 +22,51 @@
* 512 512 Byte page size
*/
struct nand_flash_dev nand_flash_ids[] = {
+#define SP_OPTIONS NAND_NEED_READRDY
+#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16)

#ifdef CONFIG_MTD_NAND_MUSEUM_IDS
- {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
- {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
- {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
- {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
-
- {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
- {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
- {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, SP_OPTIONS},
+
+ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, SP_OPTIONS16},
+ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, SP_OPTIONS16},
#endif

- {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
- {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
- {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
- {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
- {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
- {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
- {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
- {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
+ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, SP_OPTIONS16},
+ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, SP_OPTIONS16},
+
+ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, SP_OPTIONS16},
+ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, SP_OPTIONS16},
+
+ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, SP_OPTIONS16},
+ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, SP_OPTIONS16},
+
+ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, SP_OPTIONS16},
+
+ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, SP_OPTIONS},

/*
* These are the new chips with large page size. The pagesize and the
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index b7d45f3..a079da17 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1943,7 +1943,6 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
}

block_netpoll_tx();
- call_netdevice_notifiers(NETDEV_RELEASE, bond_dev);
write_lock_bh(&bond->lock);

slave = bond_get_slave_by_dev(bond, slave_dev);
@@ -2047,8 +2046,10 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
write_unlock_bh(&bond->lock);
unblock_netpoll_tx();

- if (bond->slave_cnt == 0)
+ if (bond->slave_cnt == 0) {
call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev);
+ call_netdevice_notifiers(NETDEV_RELEASE, bond->dev);
+ }

bond_compute_features(bond);
if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 0035c01..bfcb8bc 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -2075,7 +2075,7 @@ static int atl1c_tx_map(struct atl1c_adapter *adapter,
if (unlikely(pci_dma_mapping_error(adapter->pdev,
buffer_info->dma)))
goto err_dma;
-
+ ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE,
ATL1C_PCIMAP_TODEVICE);
mapped_len += map_len;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 88291bb..bf3f4bc 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1434,12 +1434,11 @@ int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
}

#ifdef CONFIG_RFS_ACCEL
- priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool);
- if (!priv->dev->rx_cpu_rmap)
- goto err;
-
- INIT_LIST_HEAD(&priv->filters);
- spin_lock_init(&priv->filters_lock);
+ if (priv->mdev->dev->caps.comp_pool) {
+ priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool);
+ if (!priv->dev->rx_cpu_rmap)
+ goto err;
+ }
#endif

return 0;
@@ -1634,6 +1633,11 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
if (err)
goto out;

+#ifdef CONFIG_RFS_ACCEL
+ INIT_LIST_HEAD(&priv->filters);
+ spin_lock_init(&priv->filters_lock);
+#endif
+
/* Allocate page for receive rings */
err = mlx4_alloc_hwq_res(mdev->dev, &priv->res,
MLX4_EN_PAGE_SIZE, MLX4_EN_PAGE_SIZE);
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index d3fb97d..e5cb723 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -628,6 +628,7 @@ void macvlan_common_setup(struct net_device *dev)
ether_setup(dev);

dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
+ dev->priv_flags |= IFF_UNICAST_FLT;
dev->netdev_ops = &macvlan_netdev_ops;
dev->destructor = free_netdev;
dev->header_ops = &macvlan_hard_header_ops,
diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index ad86660..8efe47a 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -1139,6 +1139,8 @@ static int team_port_del(struct team *team, struct net_device *port_dev)
netdev_set_master(port_dev, NULL);
team_port_disable_netpoll(port);
vlan_vids_del_by_dev(port_dev, dev);
+ dev_uc_unsync(port_dev, dev);
+ dev_mc_unsync(port_dev, dev);
dev_close(port_dev);
team_port_leave(team, port);
team_port_set_orig_dev_addr(port);
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 2917a86..cb95fe5 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -748,6 +748,8 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
goto drop;
skb_orphan(skb);

+ nf_reset(skb);
+
/* Enqueue packet */
skb_queue_tail(&tfile->socket.sk->sk_receive_queue, skb);

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 656230e..6993bfa 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1491,6 +1491,15 @@ static __net_init int vxlan_init_net(struct net *net)
static __net_exit void vxlan_exit_net(struct net *net)
{
struct vxlan_net *vn = net_generic(net, vxlan_net_id);
+ struct vxlan_dev *vxlan;
+ struct hlist_node *pos;
+ unsigned h;
+
+ rtnl_lock();
+ for (h = 0; h < VNI_HASH_SIZE; ++h)
+ hlist_for_each_entry(vxlan, pos, &vn->vni_list[h], hlist)
+ dev_close(vxlan->dev);
+ rtnl_unlock();

if (vn->sock) {
sk_release_kernel(vn->sock->sk);
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index 1767998..3e7f961 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -948,12 +948,13 @@ static int dt9812_di_rinsn(struct comedi_device *dev,
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
u8 bits = 0;

dt9812_digital_in(devpriv->slot, &bits);
for (n = 0; n < insn->n; n++)
- data[n] = ((1 << insn->chanspec) & bits) != 0;
+ data[n] = ((1 << channel) & bits) != 0;
return n;
}

@@ -962,12 +963,13 @@ static int dt9812_do_winsn(struct comedi_device *dev,
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
u8 bits = 0;

dt9812_digital_out_shadow(devpriv->slot, &bits);
for (n = 0; n < insn->n; n++) {
- u8 mask = 1 << insn->chanspec;
+ u8 mask = 1 << channel;

bits &= ~mask;
if (data[n])
@@ -982,13 +984,13 @@ static int dt9812_ai_rinsn(struct comedi_device *dev,
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;

for (n = 0; n < insn->n; n++) {
u16 value = 0;

- dt9812_analog_in(devpriv->slot, insn->chanspec, &value,
- DT9812_GAIN_1);
+ dt9812_analog_in(devpriv->slot, channel, &value, DT9812_GAIN_1);
data[n] = value;
}
return n;
@@ -999,12 +1001,13 @@ static int dt9812_ao_rinsn(struct comedi_device *dev,
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
u16 value;

for (n = 0; n < insn->n; n++) {
value = 0;
- dt9812_analog_out_shadow(devpriv->slot, insn->chanspec, &value);
+ dt9812_analog_out_shadow(devpriv->slot, channel, &value);
data[n] = value;
}
return n;
@@ -1015,10 +1018,11 @@ static int dt9812_ao_winsn(struct comedi_device *dev,
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;

for (n = 0; n < insn->n; n++)
- dt9812_analog_out(devpriv->slot, insn->chanspec, data[n]);
+ dt9812_analog_out(devpriv->slot, channel, data[n]);
return n;
}

diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index f33086d..f726970 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -644,8 +644,6 @@ static int vt6656_suspend(struct usb_interface *intf, pm_message_t message)
if (device->flags & DEVICE_FLAGS_OPENED)
device_close(device->dev);

- usb_put_dev(interface_to_usbdev(intf));
-
return 0;
}

@@ -656,8 +654,6 @@ static int vt6656_resume(struct usb_interface *intf)
if (!device || !device->dev)
return -ENODEV;

- usb_get_dev(interface_to_usbdev(intf));
-
if (!(device->flags & DEVICE_FLAGS_OPENED))
device_open(device->dev);

diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 79ff3a5..ac35c90 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -47,7 +47,6 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
/* Review - krefs on tty_link ?? */
if (!tty->link)
return;
- tty->link->packet = 0;
set_bit(TTY_OTHER_CLOSED, &tty->link->flags);
wake_up_interruptible(&tty->link->read_wait);
wake_up_interruptible(&tty->link->write_wait);
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index f932043..733f22c 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -308,7 +308,28 @@ static const struct serial8250_config uart_config[] = {
},
[PORT_8250_CIR] = {
.name = "CIR port"
- }
+ },
+ [PORT_ALTR_16550_F32] = {
+ .name = "Altera 16550 FIFO32",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F64] = {
+ .name = "Altera 16550 FIFO64",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F128] = {
+ .name = "Altera 16550 FIFO128",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};

/* Uart divisor latch read */
@@ -3430,3 +3451,32 @@ module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
#endif
MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+
+#ifndef MODULE
+/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name
+ * working as well for the module options so we don't break people. We
+ * need to keep the names identical and the convenient macros will happily
+ * refuse to let us do that by failing the build with redefinition errors
+ * of global variables. So we stick them inside a dummy function to avoid
+ * those conflicts. The options still get parsed, and the redefined
+ * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive.
+ *
+ * This is hacky. I'm sorry.
+ */
+static void __used s8250_options(void)
+{
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "8250."
+
+ module_param_cb(share_irqs, &param_ops_uint, &share_irqs, 0644);
+ module_param_cb(nr_uarts, &param_ops_uint, &nr_uarts, 0644);
+ module_param_cb(skip_txen_test, &param_ops_uint, &skip_txen_test, 0644);
+#ifdef CONFIG_SERIAL_8250_RSA
+ __module_param_call(MODULE_PARAM_PREFIX, probe_rsa,
+ &param_array_ops, .arr = &__param_arr_probe_rsa,
+ 0444, -1);
+#endif
+}
+#else
+MODULE_ALIAS("8250");
+#endif
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index a27a98e..5cdb092 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1321,6 +1321,7 @@ pci_wch_ch353_setup(struct serial_private *priv,

/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588

/*
* Master list of serial port init/setup/exit quirks.
@@ -1592,15 +1593,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
},
{
.vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_9050,
- .subvendor = PCI_VENDOR_ID_PLX,
- .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
- .init = pci_plx9050_init,
- .setup = pci_default_setup,
- .exit = pci_plx9050_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_ROMULUS,
.subvendor = PCI_VENDOR_ID_PLX,
.subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
@@ -3456,7 +3448,12 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_VENDOR_ID_PLX,
PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
- pbn_b0_4_115200 },
+ pbn_b2_4_115200 },
+ /* Unknown card - subdevice 0x1588 */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_VENDOR_ID_PLX,
+ PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0,
+ pbn_b2_8_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_KEYSPAN,
PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
@@ -4449,6 +4446,10 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_VENDOR_ID_IBM, 0x0299,
0, 0, pbn_b0_bt_2_115200 },

+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+ 0x1000, 0x0012,
+ 0, 0, pbn_b0_bt_2_115200 },
+
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 35d9ab9..b3455a9 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -429,6 +429,7 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
struct uart_8250_port uart;
int ret, line, flags = dev_id->driver_data;
+ struct resource *res = NULL;

if (flags & UNKNOWN_DEV) {
ret = serial_pnp_guess_board(dev);
@@ -439,11 +440,12 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
uart.port.irq = pnp_irq(dev, 0);
- if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
- uart.port.iobase = pnp_port_start(dev, 2);
- uart.port.iotype = UPIO_PORT;
- } else if (pnp_port_valid(dev, 0)) {
- uart.port.iobase = pnp_port_start(dev, 0);
+ if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
+ res = pnp_get_resource(dev, IORESOURCE_IO, 2);
+ else if (pnp_port_valid(dev, 0))
+ res = pnp_get_resource(dev, IORESOURCE_IO, 0);
+ if (pnp_resource_enabled(res)) {
+ uart.port.iobase = res->start;
uart.port.iotype = UPIO_PORT;
} else if (pnp_mem_valid(dev, 0)) {
uart.port.mapbase = pnp_mem_start(dev, 0);
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 59c23d0..02e706e 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -209,14 +209,14 @@ config SERIAL_SAMSUNG
config SERIAL_SAMSUNG_UARTS_4
bool
depends on PLAT_SAMSUNG
- default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
+ default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
help
Internal node for the common case of 4 Samsung compatible UARTs

config SERIAL_SAMSUNG_UARTS
int
depends on PLAT_SAMSUNG
- default 6 if ARCH_S5P6450
+ default 6 if CPU_S5P6450
default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
default 3
help
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index e7cae1c..3490629 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -240,6 +240,12 @@ static struct of_device_id of_platform_serial_table[] = {
{ .compatible = "ns16850", .data = (void *)PORT_16850, },
{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
{ .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
+ { .compatible = "altr,16550-FIFO32",
+ .data = (void *)PORT_ALTR_16550_F32, },
+ { .compatible = "altr,16550-FIFO64",
+ .data = (void *)PORT_ALTR_16550_F64, },
+ { .compatible = "altr,16550-FIFO128",
+ .data = (void *)PORT_ALTR_16550_F128, },
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
{ .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 45d9161..cd1f861 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -473,7 +473,7 @@ static void flush_to_ldisc(struct work_struct *work)
struct tty_ldisc *disc;

tty = port->itty;
- if (WARN_RATELIMIT(tty == NULL, "tty is NULL\n"))
+ if (tty == NULL)
return;

disc = tty_ldisc_ref(tty);
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 5f0cb41..122d056 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -56,6 +56,7 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
#define WDM_RESPONDING 7
#define WDM_SUSPENDING 8
#define WDM_RESETTING 9
+#define WDM_OVERFLOW 10

#define WDM_MAX 16

@@ -155,6 +156,7 @@ static void wdm_in_callback(struct urb *urb)
{
struct wdm_device *desc = urb->context;
int status = urb->status;
+ int length = urb->actual_length;

spin_lock(&desc->iuspin);
clear_bit(WDM_RESPONDING, &desc->flags);
@@ -185,9 +187,17 @@ static void wdm_in_callback(struct urb *urb)
}

desc->rerr = status;
- desc->reslength = urb->actual_length;
- memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength);
- desc->length += desc->reslength;
+ if (length + desc->length > desc->wMaxCommand) {
+ /* The buffer would overflow */
+ set_bit(WDM_OVERFLOW, &desc->flags);
+ } else {
+ /* we may already be in overflow */
+ if (!test_bit(WDM_OVERFLOW, &desc->flags)) {
+ memmove(desc->ubuf + desc->length, desc->inbuf, length);
+ desc->length += length;
+ desc->reslength = length;
+ }
+ }
skip_error:
wake_up(&desc->wait);

@@ -435,6 +445,11 @@ retry:
rv = -ENODEV;
goto err;
}
+ if (test_bit(WDM_OVERFLOW, &desc->flags)) {
+ clear_bit(WDM_OVERFLOW, &desc->flags);
+ rv = -ENOBUFS;
+ goto err;
+ }
i++;
if (file->f_flags & O_NONBLOCK) {
if (!test_bit(WDM_READ, &desc->flags)) {
@@ -478,6 +493,7 @@ retry:
spin_unlock_irq(&desc->iuspin);
goto retry;
}
+
if (!desc->reslength) { /* zero length read */
dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
clear_bit(WDM_READ, &desc->flags);
@@ -1004,6 +1020,7 @@ static int wdm_post_reset(struct usb_interface *intf)
struct wdm_device *desc = wdm_find_device(intf);
int rv;

+ clear_bit(WDM_OVERFLOW, &desc->flags);
clear_bit(WDM_RESETTING, &desc->flags);
rv = recover_from_urb_loss(desc);
mutex_unlock(&desc->wlock);
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 3a4004a..f00c749 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -575,6 +575,7 @@ static int dwc3_remove(struct platform_device *pdev)
break;
}

+ dwc3_free_event_buffers(dwc);
dwc3_core_exit(dwc);

return 0;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index fd252f0..eda2cf4 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -135,7 +135,7 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
* qtd is updated in qh_completions(). Update the QH
* overlay here.
*/
- if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+ if (qh->hw->hw_token & ACTIVE_BIT(ehci)) {
qh->hw->hw_qtd_next = qtd->hw_next;
qtd = NULL;
}
@@ -449,11 +449,19 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
else if (last_status == -EINPROGRESS && !urb->unlinked)
continue;

- /* qh unlinked; token in overlay may be most current */
- if (state == QH_STATE_IDLE
- && cpu_to_hc32(ehci, qtd->qtd_dma)
- == hw->hw_current) {
+ /*
+ * If this was the active qtd when the qh was unlinked
+ * and the overlay's token is active, then the overlay
+ * hasn't been written back to the qtd yet so use its
+ * token instead of the qtd's. After the qtd is
+ * processed and removed, the overlay won't be valid
+ * any more.
+ */
+ if (state == QH_STATE_IDLE &&
+ qh->qtd_list.next == &qtd->qtd_list &&
+ (hw->hw_token & ACTIVE_BIT(ehci))) {
token = hc32_to_cpu(ehci, hw->hw_token);
+ hw->hw_token &= ~ACTIVE_BIT(ehci);

/* An unlink may leave an incomplete
* async transaction in the TT buffer.
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index edc0f0d..4747d1c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -85,6 +85,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+ { USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
@@ -150,6 +151,25 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+ { USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
+ { USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
+ { USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
+ { USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
+ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f7d339d..558adfc 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -341,6 +341,8 @@ static void option_instat_callback(struct urb *urb);
#define CINTERION_PRODUCT_EU3_E 0x0051
#define CINTERION_PRODUCT_EU3_P 0x0052
#define CINTERION_PRODUCT_PH8 0x0053
+#define CINTERION_PRODUCT_AH6 0x0055
+#define CINTERION_PRODUCT_PLS8 0x0060

/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -579,6 +581,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
@@ -1260,6 +1263,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 9b1b96f..31f81c3 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -69,6 +69,7 @@ static struct usb_device_id id_table[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) }, /* NMEA */
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) }, /* WMC */
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) }, /* DIAG */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1fac, 0x0151, 0xff, 0xff, 0xff) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 2466254..59b32b7 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -197,12 +197,15 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)

if (is_gobi1k) {
/* Gobi 1K USB layout:
- * 0: serial port (doesn't respond)
+ * 0: DM/DIAG (use libqcdm from ModemManager for communication)
* 1: serial port (doesn't respond)
* 2: AT-capable modem port
* 3: QMI/net
*/
- if (ifnum == 2)
+ if (ifnum == 0) {
+ dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
+ altsetting = 1;
+ } else if (ifnum == 2)
dev_dbg(dev, "Modem port found\n");
else
altsetting = -1;
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 7ab9046..105d900 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -92,8 +92,8 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
return 0;
}

-/* This places the HUAWEI usb dongles in multi-port mode */
-static int usb_stor_huawei_feature_init(struct us_data *us)
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
{
int result;

@@ -104,75 +104,3 @@ static int usb_stor_huawei_feature_init(struct us_data *us)
US_DEBUGP("Huawei mode set result is %d\n", result);
return 0;
}
-
-/*
- * It will send a scsi switch command called rewind' to huawei dongle.
- * When the dongle receives this command at the first time,
- * it will reboot immediately. After rebooted, it will ignore this command.
- * So it is unnecessary to read its response.
- */
-static int usb_stor_huawei_scsi_init(struct us_data *us)
-{
- int result = 0;
- int act_len = 0;
- struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
- char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
- 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
- bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
- bcbw->Tag = 0;
- bcbw->DataTransferLength = 0;
- bcbw->Flags = bcbw->Lun = 0;
- bcbw->Length = sizeof(rewind_cmd);
- memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
- memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
-
- result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
- US_BULK_CB_WRAP_LEN, &act_len);
- US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
- return result;
-}
-
-/*
- * It tries to find the supported Huawei USB dongles.
- * In Huawei, they assign the following product IDs
- * for all of their mobile broadband dongles,
- * including the new dongles in the future.
- * So if the product ID is not included in this list,
- * it means it is not Huawei's mobile broadband dongles.
- */
-static int usb_stor_huawei_dongles_pid(struct us_data *us)
-{
- struct usb_interface_descriptor *idesc;
- int idProduct;
-
- idesc = &us->pusb_intf->cur_altsetting->desc;
- idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
- /* The first port is CDROM,
- * means the dongle in the single port mode,
- * and a switch command is required to be sent. */
- if (idesc && idesc->bInterfaceNumber == 0) {
- if ((idProduct == 0x1001)
- || (idProduct == 0x1003)
- || (idProduct == 0x1004)
- || (idProduct >= 0x1401 && idProduct <= 0x1500)
- || (idProduct >= 0x1505 && idProduct <= 0x1600)
- || (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
- return 1;
- }
- }
- return 0;
-}
-
-int usb_stor_huawei_init(struct us_data *us)
-{
- int result = 0;
-
- if (usb_stor_huawei_dongles_pid(us)) {
- if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
- result = usb_stor_huawei_scsi_init(us);
- else
- result = usb_stor_huawei_feature_init(us);
- }
- return result;
-}
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 5376d4f..529327f 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -46,5 +46,5 @@ int usb_stor_euscsi_init(struct us_data *us);
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);

-/* This places the HUAWEI usb dongles in multi-port mode */
-int usb_stor_huawei_init(struct us_data *us);
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 72923b5..d305a5a 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1527,10 +1527,335 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
/* Reported by fangxiaozhi <huananhu@xxxxxxxxxx>
* This brings the HUAWEI data card devices into multi-port mode
*/
-UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
+UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),

/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 12cf5f3..025428e 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -422,17 +422,22 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
= var->bits_per_pixel;
break;
case 16:
+ /* Older SOCs use IBGR:555 rather than BGR:565. */
+ if (sinfo->have_intensity_bit)
+ var->green.length = 5;
+ else
+ var->green.length = 6;
+
if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
- /* RGB:565 mode */
- var->red.offset = 11;
+ /* RGB:5X5 mode */
+ var->red.offset = var->green.length + 5;
var->blue.offset = 0;
} else {
- /* BGR:565 mode */
+ /* BGR:5X5 mode */
var->red.offset = 0;
- var->blue.offset = 11;
+ var->blue.offset = var->green.length + 5;
}
var->green.offset = 5;
- var->green.length = 6;
var->red.length = var->blue.length = 5;
break;
case 32:
@@ -679,8 +684,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,

case FB_VISUAL_PSEUDOCOLOR:
if (regno < 256) {
- if (cpu_is_at91sam9261() || cpu_is_at91sam9263()
- || cpu_is_at91sam9rl()) {
+ if (sinfo->have_intensity_bit) {
/* old style I+BGR:555 */
val = ((red >> 11) & 0x001f);
val |= ((green >> 6) & 0x03e0);
@@ -870,6 +874,10 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
}
sinfo->info = info;
sinfo->pdev = pdev;
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9263() ||
+ cpu_is_at91sam9rl()) {
+ sinfo->have_intensity_bit = true;
+ }

strcpy(info->fix.id, sinfo->pdev->name);
info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index d39dfa4..012817a 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -158,7 +158,7 @@ static int w1_gpio_probe(struct platform_device *pdev)
return err;
}

-static int __exit w1_gpio_remove(struct platform_device *pdev)
+static int w1_gpio_remove(struct platform_device *pdev)
{
struct w1_bus_master *master = platform_get_drvdata(pdev);
struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
@@ -210,7 +210,7 @@ static struct platform_driver w1_gpio_driver = {
.of_match_table = of_match_ptr(w1_gpio_dt_ids),
},
.probe = w1_gpio_probe,
- .remove = __exit_p(w1_gpio_remove),
+ .remove = w1_gpio_remove,
.suspend = w1_gpio_suspend,
.resume = w1_gpio_resume,
};
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 7994d933..7ce277d 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -924,7 +924,8 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
tmp64 = (triplet_ret >> 2);
rn |= (tmp64 << i);

- if (kthread_should_stop()) {
+ /* ensure we're called from kthread and not by netlink callback */
+ if (!dev->priv && kthread_should_stop()) {
mutex_unlock(&dev->bus_mutex);
dev_dbg(&dev->dev, "Abort w1_search\n");
return;
diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index 37c1f82..b98cf0c 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -113,7 +113,8 @@ void xen_pcibk_reset_device(struct pci_dev *dev)
if (dev->msi_enabled)
pci_disable_msi(dev);
#endif
- pci_disable_device(dev);
+ if (pci_is_enabled(dev))
+ pci_disable_device(dev);

pci_write_config_word(dev, PCI_COMMAND, 0);

diff --git a/fs/block_dev.c b/fs/block_dev.c
index 78333a3..78edf76 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1033,7 +1033,9 @@ void bd_set_size(struct block_device *bdev, loff_t size)
{
unsigned bsize = bdev_logical_block_size(bdev);

- bdev->bd_inode->i_size = size;
+ mutex_lock(&bdev->bd_inode->i_mutex);
+ i_size_write(bdev->bd_inode, size);
+ mutex_unlock(&bdev->bd_inode->i_mutex);
while (bsize < PAGE_CACHE_SIZE) {
if (size & bsize)
break;
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index ac8ff8d..1fd234a 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -681,6 +681,12 @@ int btrfs_close_devices(struct btrfs_fs_devices *fs_devices)
__btrfs_close_devices(fs_devices);
free_fs_devices(fs_devices);
}
+ /*
+ * Wait for rcu kworkers under __btrfs_close_devices
+ * to finish all blkdev_puts so device is really
+ * free when umount is done.
+ */
+ rcu_barrier();
return ret;
}

diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 6e50223..0a7f2d0b 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -353,7 +353,7 @@ static struct block_device *ext3_blkdev_get(dev_t dev, struct super_block *sb)
return bdev;

fail:
- ext3_msg(sb, "error: failed to open journal device %s: %ld",
+ ext3_msg(sb, KERN_ERR, "error: failed to open journal device %s: %ld",
__bdevname(dev, b), PTR_ERR(bdev));

return NULL;
@@ -887,7 +887,7 @@ static ext3_fsblk_t get_sb_block(void **data, struct super_block *sb)
/*todo: use simple_strtoll with >32bit ext3 */
sb_block = simple_strtoul(options, &options, 0);
if (*options && *options != ',') {
- ext3_msg(sb, "error: invalid sb specification: %s",
+ ext3_msg(sb, KERN_ERR, "error: invalid sb specification: %s",
(char *) *data);
return 1;
}
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 7ccb3c5..ef52d9c 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -187,6 +187,13 @@ typedef enum {
* This happens with the Renesas AG-AND chips, possibly others.
*/
#define BBT_AUTO_REFRESH 0x00000080
+/*
+ * Chip requires ready check on read (for auto-incremented sequential read).
+ * True only for small page devices; large page devices do not support
+ * autoincrement.
+ */
+#define NAND_NEED_READRDY 0x00000100
+
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200

diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 6bfb2faa..a280650 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -794,6 +794,12 @@ static inline int __perf_event_disable(void *info) { return -1; }
static inline void perf_event_task_tick(void) { }
#endif

+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_INTEL)
+extern void perf_restore_debug_store(void);
+#else
+static inline void perf_restore_debug_store(void) { }
+#endif
+
#define perf_output_put(handle, x) perf_output_copy((handle), &(x), sizeof(x))

/*
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 8f6e50a..c019b24 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -51,7 +51,10 @@
#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */
#define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */
#define PORT_BRCM_TRUMANAGE 25
-#define PORT_MAX_8250 25 /* max port ID */
+#define PORT_ALTR_16550_F32 26 /* Altera 16550 UART with 32 FIFOs */
+#define PORT_ALTR_16550_F64 27 /* Altera 16550 UART with 64 FIFOs */
+#define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
+#define PORT_MAX_8250 28 /* max port ID */

/*
* ARM specific type numbers. These are not currently guaranteed
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index 28447f1..5f0e234 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -62,6 +62,7 @@ struct atmel_lcdfb_info {
void (*atmel_lcdfb_power_control)(int on);
struct fb_monspecs *default_monspecs;
u32 pseudo_palette[16];
+ bool have_intensity_bit;
};

#define ATMEL_LCDC_DMABADDR1 0x00
diff --git a/kernel/signal.c b/kernel/signal.c
index 3d09cf6..7591ccc 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -485,6 +485,9 @@ flush_signal_handlers(struct task_struct *t, int force_default)
if (force_default || ka->sa.sa_handler != SIG_IGN)
ka->sa.sa_handler = SIG_DFL;
ka->sa.sa_flags = 0;
+#ifdef SA_RESTORER
+ ka->sa.sa_restorer = NULL;
+#endif
sigemptyset(&ka->sa.sa_mask);
ka++;
}
diff --git a/net/bridge/br_mdb.c b/net/bridge/br_mdb.c
index acc9f4c..2897e40 100644
--- a/net/bridge/br_mdb.c
+++ b/net/bridge/br_mdb.c
@@ -82,6 +82,7 @@ static int br_mdb_fill_info(struct sk_buff *skb, struct netlink_callback *cb,
port = p->port;
if (port) {
struct br_mdb_entry e;
+ memset(&e, 0, sizeof(e));
e.ifindex = port->dev->ifindex;
e.state = p->state;
if (p->addr.proto == htons(ETH_P_IP))
@@ -138,6 +139,7 @@ static int br_mdb_dump(struct sk_buff *skb, struct netlink_callback *cb)
break;

bpm = nlmsg_data(nlh);
+ memset(bpm, 0, sizeof(*bpm));
bpm->ifindex = dev->ifindex;
if (br_mdb_fill_info(skb, cb, dev) < 0)
goto out;
@@ -173,6 +175,7 @@ static int nlmsg_populate_mdb_fill(struct sk_buff *skb,
return -EMSGSIZE;

bpm = nlmsg_data(nlh);
+ memset(bpm, 0, sizeof(*bpm));
bpm->family = AF_BRIDGE;
bpm->ifindex = dev->ifindex;
nest = nla_nest_start(skb, MDBA_MDB);
@@ -230,6 +233,7 @@ void br_mdb_notify(struct net_device *dev, struct net_bridge_port *port,
{
struct br_mdb_entry entry;

+ memset(&entry, 0, sizeof(entry));
entry.ifindex = port->dev->ifindex;
entry.addr.proto = group->proto;
entry.addr.u.ip4 = group->u.ip4;
diff --git a/net/core/dev.c b/net/core/dev.c
index f64e439..1339f77 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3419,6 +3419,7 @@ ncls:
}
switch (rx_handler(&skb)) {
case RX_HANDLER_CONSUMED:
+ ret = NET_RX_SUCCESS;
goto unlock;
case RX_HANDLER_ANOTHER:
goto another_round;
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 1868625..798f920 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -976,6 +976,7 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
* report anything.
*/
ivi.spoofchk = -1;
+ memset(ivi.mac, 0, sizeof(ivi.mac));
if (dev->netdev_ops->ndo_get_vf_config(dev, i, &ivi))
break;
vf_mac.vf =
diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c
index 1b588e2..21291f1 100644
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -284,6 +284,7 @@ static int dcbnl_getperm_hwaddr(struct net_device *netdev, struct nlmsghdr *nlh,
if (!netdev->dcbnl_ops->getpermhwaddr)
return -EOPNOTSUPP;

+ memset(perm_addr, 0, sizeof(perm_addr));
netdev->dcbnl_ops->getpermhwaddr(netdev, perm_addr);

return nla_put(skb, DCB_ATTR_PERM_HWADDR, sizeof(perm_addr), perm_addr);
@@ -1042,6 +1043,7 @@ static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)

if (ops->ieee_getets) {
struct ieee_ets ets;
+ memset(&ets, 0, sizeof(ets));
err = ops->ieee_getets(netdev, &ets);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_ETS, sizeof(ets), &ets))
@@ -1050,6 +1052,7 @@ static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)

if (ops->ieee_getmaxrate) {
struct ieee_maxrate maxrate;
+ memset(&maxrate, 0, sizeof(maxrate));
err = ops->ieee_getmaxrate(netdev, &maxrate);
if (!err) {
err = nla_put(skb, DCB_ATTR_IEEE_MAXRATE,
@@ -1061,6 +1064,7 @@ static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)

if (ops->ieee_getpfc) {
struct ieee_pfc pfc;
+ memset(&pfc, 0, sizeof(pfc));
err = ops->ieee_getpfc(netdev, &pfc);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_PFC, sizeof(pfc), &pfc))
@@ -1094,6 +1098,7 @@ static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)
/* get peer info if available */
if (ops->ieee_peer_getets) {
struct ieee_ets ets;
+ memset(&ets, 0, sizeof(ets));
err = ops->ieee_peer_getets(netdev, &ets);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_PEER_ETS, sizeof(ets), &ets))
@@ -1102,6 +1107,7 @@ static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)

if (ops->ieee_peer_getpfc) {
struct ieee_pfc pfc;
+ memset(&pfc, 0, sizeof(pfc));
err = ops->ieee_peer_getpfc(netdev, &pfc);
if (!err &&
nla_put(skb, DCB_ATTR_IEEE_PEER_PFC, sizeof(pfc), &pfc))
@@ -1280,6 +1286,7 @@ static int dcbnl_cee_fill(struct sk_buff *skb, struct net_device *netdev)
/* peer info if available */
if (ops->cee_peer_getpg) {
struct cee_pg pg;
+ memset(&pg, 0, sizeof(pg));
err = ops->cee_peer_getpg(netdev, &pg);
if (!err &&
nla_put(skb, DCB_ATTR_CEE_PEER_PG, sizeof(pg), &pg))
@@ -1288,6 +1295,7 @@ static int dcbnl_cee_fill(struct sk_buff *skb, struct net_device *netdev)

if (ops->cee_peer_getpfc) {
struct cee_pfc pfc;
+ memset(&pfc, 0, sizeof(pfc));
err = ops->cee_peer_getpfc(netdev, &pfc);
if (!err &&
nla_put(skb, DCB_ATTR_CEE_PEER_PFC, sizeof(pfc), &pfc))
diff --git a/net/ieee802154/6lowpan.h b/net/ieee802154/6lowpan.h
index 8c2251f..bba5f83 100644
--- a/net/ieee802154/6lowpan.h
+++ b/net/ieee802154/6lowpan.h
@@ -84,7 +84,7 @@
(memcmp(addr1, addr2, length >> 3) == 0)

/* local link, i.e. FE80::/10 */
-#define is_addr_link_local(a) (((a)->s6_addr16[0]) == 0x80FE)
+#define is_addr_link_local(a) (((a)->s6_addr16[0]) == htons(0xFE80))

/*
* check whether we can compress the IID to 16 bits,
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index ad70a96..66702d3 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5498,6 +5498,9 @@ int tcp_rcv_established(struct sock *sk, struct sk_buff *skb,
if (tcp_checksum_complete_user(sk, skb))
goto csum_error;

+ if ((int)skb->truesize > sk->sk_forward_alloc)
+ goto step5;
+
/* Predicted packet is in window by definition.
* seq == rcv_nxt and rcv_wup <= rcv_nxt.
* Hence, check seq<=rcv_wup reduces to:
@@ -5509,9 +5512,6 @@ int tcp_rcv_established(struct sock *sk, struct sk_buff *skb,

tcp_rcv_rtt_measure_ts(sk, skb);

- if ((int)skb->truesize > sk->sk_forward_alloc)
- goto step5;
-
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPHPHITS);

/* Bulk data transfer: receiver */
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index a52d864..b196852 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -270,7 +270,8 @@ int ip6_mc_input(struct sk_buff *skb)
* IPv6 multicast router mode is now supported ;)
*/
if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
- !(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) &&
+ !(ipv6_addr_type(&hdr->daddr) &
+ (IPV6_ADDR_LOOPBACK|IPV6_ADDR_LINKLOCAL)) &&
likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
/*
* Okay, we try to forward - split and duplicate
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 6f9f7b6..5845613 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1990,7 +1990,8 @@ void rt6_purge_dflt_routers(struct net *net)
restart:
read_lock_bh(&table->tb6_lock);
for (rt = table->tb6_root.leaf; rt; rt = rt->dst.rt6_next) {
- if (rt->rt6i_flags & (RTF_DEFAULT | RTF_ADDRCONF)) {
+ if (rt->rt6i_flags & (RTF_DEFAULT | RTF_ADDRCONF) &&
+ (!rt->rt6i_idev || rt->rt6i_idev->cnf.accept_ra != 2)) {
dst_hold(&rt->dst);
read_unlock_bh(&table->tb6_lock);
ip6_del_rt(rt);
diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
index 716605c..044e9e1 100644
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -355,6 +355,7 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh
l2tp_xmit_skb(session, skb, session->hdr_len);

sock_put(ps->tunnel_sock);
+ sock_put(sk);

return error;

diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index 847d495..8a6c6ea 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -1189,8 +1189,6 @@ static int netlbl_unlabel_staticlist(struct sk_buff *skb,
struct netlbl_unlhsh_walk_arg cb_arg;
u32 skip_bkt = cb->args[0];
u32 skip_chain = cb->args[1];
- u32 skip_addr4 = cb->args[2];
- u32 skip_addr6 = cb->args[3];
u32 iter_bkt;
u32 iter_chain = 0, iter_addr4 = 0, iter_addr6 = 0;
struct netlbl_unlhsh_iface *iface;
@@ -1215,7 +1213,7 @@ static int netlbl_unlabel_staticlist(struct sk_buff *skb,
continue;
netlbl_af4list_foreach_rcu(addr4,
&iface->addr4_list) {
- if (iter_addr4++ < skip_addr4)
+ if (iter_addr4++ < cb->args[2])
continue;
if (netlbl_unlabel_staticlist_gen(
NLBL_UNLABEL_C_STATICLIST,
@@ -1231,7 +1229,7 @@ static int netlbl_unlabel_staticlist(struct sk_buff *skb,
#if IS_ENABLED(CONFIG_IPV6)
netlbl_af6list_foreach_rcu(addr6,
&iface->addr6_list) {
- if (iter_addr6++ < skip_addr6)
+ if (iter_addr6++ < cb->args[3])
continue;
if (netlbl_unlabel_staticlist_gen(
NLBL_UNLABEL_C_STATICLIST,
@@ -1250,10 +1248,10 @@ static int netlbl_unlabel_staticlist(struct sk_buff *skb,

unlabel_staticlist_return:
rcu_read_unlock();
- cb->args[0] = skip_bkt;
- cb->args[1] = skip_chain;
- cb->args[2] = skip_addr4;
- cb->args[3] = skip_addr6;
+ cb->args[0] = iter_bkt;
+ cb->args[1] = iter_chain;
+ cb->args[2] = iter_addr4;
+ cb->args[3] = iter_addr6;
return skb->len;
}

@@ -1273,12 +1271,9 @@ static int netlbl_unlabel_staticlistdef(struct sk_buff *skb,
{
struct netlbl_unlhsh_walk_arg cb_arg;
struct netlbl_unlhsh_iface *iface;
- u32 skip_addr4 = cb->args[0];
- u32 skip_addr6 = cb->args[1];
- u32 iter_addr4 = 0;
+ u32 iter_addr4 = 0, iter_addr6 = 0;
struct netlbl_af4list *addr4;
#if IS_ENABLED(CONFIG_IPV6)
- u32 iter_addr6 = 0;
struct netlbl_af6list *addr6;
#endif

@@ -1292,7 +1287,7 @@ static int netlbl_unlabel_staticlistdef(struct sk_buff *skb,
goto unlabel_staticlistdef_return;

netlbl_af4list_foreach_rcu(addr4, &iface->addr4_list) {
- if (iter_addr4++ < skip_addr4)
+ if (iter_addr4++ < cb->args[0])
continue;
if (netlbl_unlabel_staticlist_gen(NLBL_UNLABEL_C_STATICLISTDEF,
iface,
@@ -1305,7 +1300,7 @@ static int netlbl_unlabel_staticlistdef(struct sk_buff *skb,
}
#if IS_ENABLED(CONFIG_IPV6)
netlbl_af6list_foreach_rcu(addr6, &iface->addr6_list) {
- if (iter_addr6++ < skip_addr6)
+ if (iter_addr6++ < cb->args[1])
continue;
if (netlbl_unlabel_staticlist_gen(NLBL_UNLABEL_C_STATICLISTDEF,
iface,
@@ -1320,8 +1315,8 @@ static int netlbl_unlabel_staticlistdef(struct sk_buff *skb,

unlabel_staticlistdef_return:
rcu_read_unlock();
- cb->args[0] = skip_addr4;
- cb->args[1] = skip_addr6;
+ cb->args[0] = iter_addr4;
+ cb->args[1] = iter_addr6;
return skb->len;
}

diff --git a/net/rds/message.c b/net/rds/message.c
index f0a4658..aff589c 100644
--- a/net/rds/message.c
+++ b/net/rds/message.c
@@ -197,6 +197,9 @@ struct rds_message *rds_message_alloc(unsigned int extra_len, gfp_t gfp)
{
struct rds_message *rm;

+ if (extra_len > KMALLOC_MAX_SIZE - sizeof(struct rds_message))
+ return NULL;
+
rm = kzalloc(sizeof(struct rds_message) + extra_len, gfp);
if (!rm)
goto out;
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index cedd9bf..9ef5c73 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -5653,6 +5653,9 @@ static int sctp_getsockopt_assoc_stats(struct sock *sk, int len,
if (len < sizeof(sctp_assoc_t))
return -EINVAL;

+ /* Allow the struct to grow and fill in as much as possible */
+ len = min_t(size_t, len, sizeof(sas));
+
if (copy_from_user(&sas, optval, len))
return -EFAULT;

@@ -5686,9 +5689,6 @@ static int sctp_getsockopt_assoc_stats(struct sock *sk, int len,
/* Mark beginning of a new observation period */
asoc->stats.max_obs_rto = asoc->rto_min;

- /* Allow the struct to grow and fill in as much as possible */
- len = min_t(size_t, len, sizeof(sas));
-
if (put_user(len, optlen))
return -EFAULT;

diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 06ba4a7..e253917 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -8,7 +8,7 @@
# ==========================================================================

# called may set destination dir (when installing to asm/)
-_dst := $(or $(destination-y),$(dst),$(obj))
+_dst := $(if $(destination-y),$(destination-y),$(if $(dst),$(dst),$(obj)))

# generated header directory
gen := $(if $(gen),$(gen),$(subst include/,include/generated/,$(obj)))
@@ -48,13 +48,14 @@ all-files := $(header-y) $(genhdr-y) $(wrapper-files)
output-files := $(addprefix $(installdir)/, $(all-files))

input-files := $(foreach hdr, $(header-y), \
- $(or \
+ $(if $(wildcard $(srcdir)/$(hdr)), \
$(wildcard $(srcdir)/$(hdr)), \
- $(wildcard $(oldsrcdir)/$(hdr)), \
- $(error Missing UAPI file $(srcdir)/$(hdr)) \
+ $(if $(wildcard $(oldsrcdir)/$(hdr)), \
+ $(wildcard $(oldsrcdir)/$(hdr)), \
+ $(error Missing UAPI file $(srcdir)/$(hdr))) \
)) \
$(foreach hdr, $(genhdr-y), \
- $(or \
+ $(if $(wildcard $(gendir)/$(hdr)), \
$(wildcard $(gendir)/$(hdr)), \
$(error Missing generated UAPI file $(gendir)/$(hdr)) \
))
diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c
index 48665ec..8ab2951 100644
--- a/security/selinux/xfrm.c
+++ b/security/selinux/xfrm.c
@@ -310,7 +310,7 @@ int selinux_xfrm_policy_clone(struct xfrm_sec_ctx *old_ctx,

if (old_ctx) {
new_ctx = kmalloc(sizeof(*old_ctx) + old_ctx->ctx_len,
- GFP_KERNEL);
+ GFP_ATOMIC);
if (!new_ctx)
return -ENOMEM;

diff --git a/sound/core/seq/seq_timer.c b/sound/core/seq/seq_timer.c
index 160b1bd..24d44b2 100644
--- a/sound/core/seq/seq_timer.c
+++ b/sound/core/seq/seq_timer.c
@@ -290,10 +290,10 @@ int snd_seq_timer_open(struct snd_seq_queue *q)
tid.device = SNDRV_TIMER_GLOBAL_SYSTEM;
err = snd_timer_open(&t, str, &tid, q->queue);
}
- if (err < 0) {
- snd_printk(KERN_ERR "seq fatal error: cannot create timer (%i)\n", err);
- return err;
- }
+ }
+ if (err < 0) {
+ snd_printk(KERN_ERR "seq fatal error: cannot create timer (%i)\n", err);
+ return err;
}
t->callback = snd_seq_timer_interrupt;
t->callback_data = q;
diff --git a/tools/usb/ffs-test.c b/tools/usb/ffs-test.c
index 8674b9e..fe1e66b 100644
--- a/tools/usb/ffs-test.c
+++ b/tools/usb/ffs-test.c
@@ -38,7 +38,7 @@
#include <unistd.h>
#include <tools/le_byteshift.h>

-#include "../../include/linux/usb/functionfs.h"
+#include "../../include/uapi/linux/usb/functionfs.h"

/******************** Little Endian Handling ********************************/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: CORREO: "cuenta cancelada"
Previous message: Sven Joachim: "Re: [ 12/75] USB: EHCI: work around silicon bug in Intels EHCI controllers"
In reply to: Greg KH: "Linux 3.8.4"
Next in thread: Sebastian Gottschall: "Re: Linux 3.8.4"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]