[PATCH 4/9] staging/sb105x: change some printk to corresponding dev_*

From: Samuel Iglesias Gonsalvez
Date: Tue Mar 19 2013 - 05:53:53 EST


Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@xxxxxxxxxx>
---
drivers/staging/sb105x/sb_pci_mp.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c
index 7196412..9e30a0c 100644
--- a/drivers/staging/sb105x/sb_pci_mp.c
+++ b/drivers/staging/sb105x/sb_pci_mp.c
@@ -180,7 +180,7 @@ static int sb1054_get_register(struct sb_uart_port * port, int page, int reg)
unsigned int tmp = 0;

if (page <= 0) {
- printk(" page 0 can not use this fuction\n");
+ dev_err(port->dev, " page 0 can not use this fuction\n");
return -1;
}

@@ -225,7 +225,7 @@ static int sb1054_get_register(struct sb_uart_port * port, int page, int reg)
SB105X_PUT_LCR(port,lcr);
break;
default:
- printk(" error invalid page number \n");
+ dev_err(port->dev, " error invalid page number \n");
return -1;
}

@@ -239,7 +239,7 @@ static int sb1054_set_register(struct sb_uart_port * port, int page, int reg, in
int ret = 0;

if (page <= 0) {
- printk(" page 0 can not use this fuction\n");
+ dev_err(port->dev, " page 0 can not use this fuction\n");
return -1;
}

@@ -283,7 +283,7 @@ static int sb1054_set_register(struct sb_uart_port * port, int page, int reg, in
ret = 1;
break;
default:
- printk(" error invalid page number \n");
+ dev_err(port->dev, " error invalid page number \n");
return -1;
}

@@ -309,7 +309,7 @@ static int set_multidrop_mode(struct sb_uart_port *port, unsigned int mode)
sb1054_set_register(port, PAGE_1, SB105XA_MDR, mdr);
port->mdmode &= ~0x6;
port->mdmode |= mode;
- printk("[%d] multidrop init: %x\n", port->line, port->mdmode);
+ dev_info(port->dev, "[%d] multidrop init: %x\n", port->line, port->mdmode);

return 0;
}
@@ -477,7 +477,6 @@ static void mp_tasklet_action(unsigned long data)
struct sb_uart_state *state = (struct sb_uart_state *)data;
struct tty_struct *tty;

- printk("tasklet is called!\n");
tty = state->info->tty;
tty_wakeup(tty);
}
@@ -890,7 +889,7 @@ check_and_exit:
if (((old_flags ^ port->flags) & UPF_SPD_MASK) ||
old_custom_divisor != port->custom_divisor) {
if (port->flags & UPF_SPD_MASK) {
- printk(KERN_NOTICE
+ dev_notice(port->dev,
"%s sets custom speed on ttyMP%d. This "
"is deprecated.\n", current->comm,
port->line);
@@ -1298,12 +1297,12 @@ static void mp_close(struct tty_struct *tty, struct file *filp)
goto done;

if ((tty->count == 1) && (state->count != 1)) {
- printk("mp_close: bad serial port count; tty->count is 1, "
+ dev_err(port->dev, "mp_close: bad serial port count; tty->count is 1, "
"state->count is %d\n", state->count);
state->count = 1;
}
if (--state->count < 0) {
- printk("rs_close: bad serial port count for ttyMP%d: %d\n",
+ dev_err(port->dev, "rs_close: bad serial port count for ttyMP%d: %d\n",
port->line, state->count);
state->count = 0;
}
@@ -2397,7 +2396,7 @@ static int multi_startup(struct sb_uart_port *port)

if (!(mtpt->port.flags & UPF_BUGGY_UART) &&
(serial_inp(mtpt, UART_LSR) == 0xff)) {
- printk("ttyS%d: LSR safety check engaged!\n", mtpt->port.line);
+ dev_info(port->dev, "ttyS%d: LSR safety check engaged!\n", mtpt->port.line);
//return -ENODEV;
}

--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/