Re: [PATCH] RFC: mmc: dw_mmc: Always go to STATE_DATA_BUSY fromSTATE_DATA_ERROR

From: Jaehoon Chung
Date: Mon Mar 18 2013 - 06:21:42 EST


Hi Doug,

Great..i have found the problem like this.
I will check your patch..and share the result.

Best Regards,
Jaehoon Chung

On 03/16/2013 06:29 AM, Doug Anderson wrote:
> On a flaky piece of hardware that seems good at generating CRC errors,
> we have found that often times the CRC errors don't get reported
> properly when using CONFIG_MMC_DW_IDMAC (they get reported OK when
> using pio).
>
> The flow that happens is:
> 1. dw_mci_interrupt() fires and status=80b8, pending=8088 so that
> we hit (pending & DW_MCI_DATA_ERROR_FLAGS). We store 8088 in
> data_status and set EVENT_DATA_ERROR in host->pending_events
> 2. We schedule the tasklet and it runs.
> 3. We're in STATE_SENDING_DATA in the tasklet and see
> EVENT_DATA_ERROR so we dw_mci_stop_dma().
> 4. dw_mci_stop_dma() calls dw_mci_idmac_stop_dma() and
> dw_mci_dma_cleanup(). These stop dma but _don't_ set
> EVENT_XFER_COMPLETE (since we're host->using_dma).
> 5. data->stop is NULL so we don't send a stop command.
> 6. We move onto STATE_DATA_ERROR and loop again in the tasklet.
> 7. We hit STATE_DATA_ERROR but the transfer isn't done, so the tasklet
> stops.
>
> We never seem to get any additional DMA interrupts that cause
> EVENT_XFER_COMPLETE and restart the tasklet so we just hang. That
> doesn't seem surprising given that we've stopped DMA.
>
> We did put a print at the end of dw_mci_interrupt() to show the result
> of the "mci_readl(host, IDSTS)" and saw 0xa000 in the case of the
> above CRC error.
>
> A proposed fix for this is to ignore (but still clear) the
> EVENT_XFER_COMPLETE in STATE_DATA_ERROR in the tasklet.
>
> Reported-by: Bing Zhao <bzhao@xxxxxxxxxxx>
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> ---
> drivers/mmc/host/dw_mmc.c | 5 +----
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 9834221..696b3bb 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -1137,10 +1137,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
> goto unlock;
>
> case STATE_DATA_ERROR:
> - if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
> - &host->pending_events))
> - break;
> -
> + clear_bit(EVENT_XFER_COMPLETE, &host->pending_events);
> state = STATE_DATA_BUSY;
> break;
> }
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/